Search results for: 'foremost ripper r pop 2022 for state'
- Related search terms
- For the linear program Max 6A 7B s.t. 1A 2B ≤ 4 5A 3B ≤ 15 A, B ≥ 0 find the optimal solution using the gra
- forks river r poa 2008 for sale
- foremost ripper r poa 2008 for sale
- for ripper r poa 2007 for sale
- force ripper r poa 2020 for sale
-
2022 Wacker Neuson ET18 Track Mounted Excavator ($33,000 ex GST) (sale-ehub3598)For Sale$33,000.00Make: Wacker Neuson Model: ET18 Year: 2022 Hours: 23.6 Engine: Yanmar Diesel Track Mounted Excavator Location: Victoria, Australia Learn MoreMachine hours 23.6
KILOMETERS N/A YEAR N/A BRAND Wacker Neuson
LOCATION Victoria, Australia
MODEL ET18
-
1981 Chicago Pneumatic CP650 Water Well Drill Rig Mounted on 6x4 Crane Carrier ($137,500 ex GST) (sale-ehub3581)For Sale$137,500.00Drill Rig Make: Chicago Pneumatic Model: CP650 Year: 1981 Engine: Caterpillar CAT 3406 Onboard Air Compressor: GHH 825 CFM / 350 PSI Twin Screw Injection Pump: Comet APS 71 ltr/min @ 580 PSI Casing Driver: 612 Banger 6" Inch - 12" Inch Winch: 1/2" Inch 7,000 lbs Extendable Rod Handling Jib Hole Capacity: 6" Inch - 12" Inch 500 m 4 1/2" Inch Rods Capacity; Pull Down: 21,000 lbs Pull Back: 55,000 lbs 5 1/2" Inch Heavy Hoist Rams 73 ft/min Rapid Feed - 160 Pitch Chains Levelling Jacks; Front: 1 x 5" Inch x 48" Inch Stroke Rear: 2 x 5" Inch x 36" Inch Stroke Top Drive Rotary; 0-152 RPM - 76,000 lb Torque Twin Dynex Motors R/C Head - 7 m Travel Carrier Type: 6x4 Engine: Caterpillar CAT 3208 @ 210 HP Crane Carrier Carrier Mounted Water Well Drill Rig Location: New Zealand Learn MoreMachine hours N/A KILOMETERS N/A YEAR 1981
BRAND Chicago Pneumatic
LOCATION New Zealand
MODEL CP650
-
UDR Footclamp ($4,950 ex GST) (sale-ehub3517)For Sale$4,950.00Make: UDR Replaced; - Hydraulic Ram - Tension Rod - L&R Couplings - Clamps have been 100% disassembled, reassembled and greased up - Jaw Holders supplied with the UDR but look unused (Can be purchased separately along with jaws) - Other Footclamp has Jaw Holders but look unused Footclamp Location: Malaysia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND UDR
LOCATION Malaysia
MODEL N/A
-
2012 MAN 4x4 Support Truck ($120,000 ex GST) (sale-ehub3488)For Sale$120,000.00Make: MAN Year: 2012 KM's: 250,000 (30,000 on new engine) Type: 4x4 - New engine installed in 2022 - Bulk Fuel Underbelly Tanks *Drill Rig in photos not available with Support Truck* Dual Cab Support Truck Location: Western Australia Learn MoreMachine hours N/A KILOMETERS 250,000
YEAR 2012
BRAND MAN
LOCATION Western Australia
MODEL 4x4
-
2014 Gardner Denver PZ-7 Skid Mounted Mud Pump ($USD34,650 for Pump) (sale-ehub3440)For Sale$0.00Make: Gardner Denver Model: PZ-7 Year: 2014 - Triplex w/ Forged Steel Fluid End & Quick Change Caps - 5M Pulsation Dampener - Oteco 3" Inch Shear Relief Valve - Pressure Gauge - Mission 6x5 Charge Pump - Fitted with 7" Inch Liners & Pistons - No Engine or Transmission Condition: Good Skid Mounted Mud Pump Location: United States of America Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2014
BRAND Gardner Denver
LOCATION United States of America
MODEL PZ-7
-
2022 Atlas Copco X-Air 1,100 CFM / 380 PSI Portable Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3425)For HireMake: Atlas Copco Model: X-Air Year: 2022 Hours: 200 1,100 CFM 380 PSI Portable Air Compressor Location: New South Wales, Australia Learn MoreMachine hours 200
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL X-Air
-
1985 Jayco Pop Top Humpy / Kitchen Van ($11,000 ex GST) (sale-ehub3273)For Sale$11,000.00Make: Jayco Type: Pop Top Year: 1985 - Certified Electrical Work and Plumbing Completed - BBQ & Hotplate - Will NOT Include Fridges or Washing Machine Humpy / Kitchen Van Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 1985
BRAND Jayco
LOCATION Western Australia
MODEL Pop Up
-
2022 Bauer BC40 Track Mounted Piling Drill Rig ($EUR5,500,000) (sale-ehub3227)For Sale$0.00Make: Bauer Model: BC40 Year: 2022 Hours: 0 - Warranty for 1 Year Track Mounted Piling Drill Rig Location: China Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2021
BRAND Bauer
LOCATION China
MODEL BC40
-
SICK LMS151-10100S01 Brand New Laser ($12,000 ex GST) (sale-ehub3073)For Sale$12,000.00Make: SICK Model: LMS151-10100S01 Year: 2022 Brand New In Original Box Laser Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2021
BRAND SICK
LOCATION Queensland, Australia
MODEL LMS151-10100S01
-
2013 CE100 Diamond Core Track Mounted Drill Rig (FOR HIRE/RENT - Price Negotiable) (hire-ehub3066)For HireMake / Model: CE100 Year: 2013 (Rebuilt completed in 2022) Hours: 551 - Fully Re-Engineered - NDT Testing Completed - CT14 Hydraulic Operating System - NQ, HQ, PQ Drilling Capabilities - Up to date Safety Stop Systems - Engineered and compliant hand rail and walkway system and access ladders - Full lighting for N/S operations - Certified FOPS on driller platform - Running new Danfos Primary Hydraulic Pump at >3500 PSI direct from John Deere 127 HP - 165 HP engine - 5.7 Tonne Main Winch with certified 16mm Winch Rope - A new AMC Main Water Pump <1000 PSI with a PRV Valve Set @750 PSI - New Stryker 45ltr Certified Fire Suppression system installed - A UDR Rod Spinner has been engineered into mast structure for hands free operation of tripping rods - A hydraulic operated Breakout Spanner allows for breakout of rod joins or subs - Tungsten inserts interchangeable on Breakout Spanner - UDR Foot Clamp assembly added for ease of maintenance and clamping of rod string Diamond Core Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 551
KILOMETERS N/A YEAR N/A BRAND CE100
LOCATION Western Australia
MODEL CE100
-
2012 Chengdu Zhonghang Machinery F-500 Triplex Mud Pump Mounted on Trailer (FOR HIRE/RENT - POA) (hire-ehub1877)For HireMake: Chengdu Zhonghang Machinery Model: F-500 Year: 2012 Hours: TBA Pump Speed: 165 r/min Engine: 2011 Cummins QSX15 Trailer Mounted Triplex Mud Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Chengdu Zhonghang Machinery
LOCATION Queensland, Australia
MODEL F-500
-
2022 DW400C Track Mounted Crawler Drill Rig - Truck Mounted If Requested (POA) (sale-ehub1431)For Sale$0.00Make/Model: DW400C Year: New (2022) Machine Hours: 0 Engine: Cummins 6LTAA8.9 @ 360 HP Includes: - Sauer Danfoss Load Sensed Piston Pumps - Sauer Danfoss PVG Valves - 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque - Sliding Head - Tilting Head - Floating Spindle with 2.5" Waterway - 25 Tonne Pullback - Dump Mast (Long Stroke) - 20" Inch Diameter Through the Work Table - Breakout Ram - 8 7.5" Inch Mud Pump (Made in India) - 10 Tonne Single Pull Winch Mounted on Top of Mast - Manuli Hoses on All High Pressure Lines - 4 x Enclosed Outriggers - Can extend for ease of loading onto a lowbed trailer *Can easily be converted to RC due to the large thru-hole in the rotation head* *Can be delivered on rails for mounting onto any truck* Location: Philippines Learn MoreMachine hours N/A KILOMETERS N/A
YEAR 2021
BRAND Bundok
LOCATION Philippines
MODEL DW400C
-
4x 1998 KRUPP SCHRS710/1x15 Wheel / Bucket Excavators ($USD3.3 Million) (sale-ehub1102)For Sale$0.00Make: KRUPP Model: SCHRS710/1x15 Year: 1998 Dimensions (m): 41 x 10.5 x 10 Total weight (tons): 540 Main technical performance: Installed power: 1300KW Production capacity: 3100m3/h Number of buckets: 12 Each bucket volume: 0.71 m3 Bucket wheel diameter: 8.2 m Receiving arm length: 16 m Discharge arm length: 25 m Height of excavation: 15 m Digging depth: 1 m Walking speed: 9 m/min Bucket rotation speed: 6.08 r/min Grade at work: 1:20 Climb when walking: 1:10 Grounding average specific pressure during work: 113 kpa Maximum grounding specific pressure: 193 kpa Condition: Good Location: China Learn MoreMachine hours N/A
KILOMETERS N/A
YEAR 1998
BRAND KRUPP
LOCATION China
MODEL SCHRS710/1x15
-
2013 Caterpillar CAT D7R Ripper Track Mounted Crawler Dozer ($USD260,000) (sale-ehub1083)For Sale$0.00Make: Caterpillar Model: D7R Ripper Year: 2013 Hours: 4062 Crawler Dozer Track Mounted Erops Cab Su-Blade Serial: DSH00135 Location: West Africa Learn MoreMachine hours 4062
KILOMETERS N/A
YEAR 2013
BRAND Caterpillar
LOCATION West Africa
MODEL D7R Ripper
-
2022 Plastic P-Size 3m, H-Size 4m, N-Size 5m Core Boxes / Trays (POA) (sale-ehub1076)For Sale$0.00P-Size Wireline Size: PWL / PQ / PQ3 Year: 2022 Core Diameter: 65-86 mm Core Capacity: 3x1 m Dimensions: L - 107 cm / W - 34 cm / H - 10 cm Weight: 1.9 kg Weight w/ Cover: 2.9 kg Pallet Capacity: 175 pcs H-Size Wireline Size: HWL / HQ / HQ3 Core Diameter: 49 - 64 mm Core Capacity: 4x1 m Dimensions: L - 107 cm / W - 34 cm / H - 8 cm Weight: 1.9 kg Weight w/ Cover: 2.9 kg Pallet Capacity: 175 pcs N-Size Wireline Size: NWL / NQ / NQ3 Core Diameter: 37 - 48 mm Core Capacity: 5x1 m Dimensions: L - 107 cm / W - 34 cm / H - 6 cm Weight: 1.8 kg Weight w/ Cover: 2.8 kg Pallet Capacity: 270 pcs Location: Turkey Learn MoreMachine hours N/A
KILOMETERS N/A
YEAR 2021
BRAND Kayen
LOCATION Turkey
MODEL P-Size / H-Size / N-Size
-
2022 SPT Type F - 2" Inch Male & 1" Inch Female Gauge ($1,500 ex GST) (sale-ehub658)For Sale$1,500.00Make: SPT Model: Type F – 2” Inch Male & 1” Inch Female Year: 2022 This gauge features the following: - Accurate pressure readings with quick response to pressure changes - Built-in dampening to minimize gauge fluctuations - Liquid filled gauge minimizes vibration and wear to gauge movement - Clear lens for easy reading (6-9 m) - Temperature range -45°C to 120°C - Dimensions 9.875”x4.785” with 3.5” dial - Shipping weight STD – 9 lbs - Shipping weight salt water/corrosive – 13 lbs Part Numbers and Descriptions PRESSURE RANGE STANDARD SERVICE SALT WATER CORROSIVE FLUID 500 PSI Gauge Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2021
BRAND SPT
LOCATION New South Wales, Australia
MODEL Type F - 2" Inch Male & 1" Inch Female
-
TLB Hydraulic Casing Pullers (Price in description) (sale-ehub289)For Sale$0.00Make: TLB Model: 60t, 80t, 120t, 150t Year: 2022 TLB Hydraulic Casing Pullers TLB-60t, $AUD9,000 ex GST TLB-80t, $AUD9,350 ex GST TLB-120t, $AUD10,100 ex GST TLB-150t, $AUD10,800 ex GST Max pulling capacity: 80-100 tons Pulling Stroke: 500mm System pressure: 28mpa Flow rate: 14.4l/min Rod/casing dia: 50-194mm Power of electric motor: 11kw Over size: 300cmX650cmX450cm Weight: 300kg Max pulling capacity: 120-150 tons Pulling Stroke: 500mm System pressure: 31.5mpa Flow rate: 14.4l/min Rod/casing dia: 50-300mm Power of electric motor: 11kw Over size: 750cmX650cmX450cm Weight: 400kg Location: China Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2021
BRAND TLB
LOCATION China
MODEL 60t, 80t, 120t, 150t
-
NQ, NRQ, HQ, HRQ, PHD, BQ Drill Rods/Pipe (POA) (sale-ehub246)For Sale$0.00Make: HRM Model: NQ, NRQ, HQ, HRQ, PHD, BQ Year: 2022 Drill Rods/Pipe Location: China Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2021
BRAND HRM
LOCATION China
MODEL NQ, NRQ, HQ, HRQ, PHD, BQ
-
10, 15, 20-25 & 35 Tonne Rubber & Steel Track Hydraulic Drive Bases *Brand New* (See Description for Price) (sale-ehub192)For Sale$0.00Make: Lin Jin Hydraulics Model: 10t, 15t, 20t, 25t & 35t Year: 2022 Rubber & Steel Track Bases Sizes; - 10 Tonne - 15 Tonne - 20 Tonne - 25 Tonne - 35 Tonne Prices; 10 Tonne: $18,500 ex GST each 15 Tonne: $20,500 ex GST each 20 Tonne - 25 Tonne: $26,500 ex GST each 35 Tonne: $30,500 ex GST each *Brand New* Hydraulic Drive Location: China Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2021
BRAND Li Jin Hydraulics
LOCATION China
MODEL 10t, 15t, 20t, 25t & 35t
Filter