Search results for: 'high for size 1,350'

Hammer Size: 12" Inch Drill Bit Size: 20" Inch - With SD12 Shank (Unused) Location: Queensland, Australia Learn More

Front Air Compressor Make: Sullair Model: 1,150 CFM / 350 PSI Year: 1998 Hours: 2,408 Engine: Cummins KTA19 Rear Air Compressor Make: Doosan Model: 1,350 CFM / 350 PSI Year: 1998 Hours: 977 Engine: Cummins K19 Condition: Serviceable - Both have current in date working Fire Suppression Systems - Active Shut Down Circuits - Mounted on a Howard Porter Licensed Trailer Twin Air Compressors Trailer Mounted Location: Western Australia Learn More

Make / Model: TL-400 Contains: - Tower - Flashlight - Headlight - Charger - Driver - Battery System D24-100 - USD Output, 5V 2A (2 Dock) for charging Headlight, Flashlight or Mobile Phone - 1-3 Battery Pack (1 Battery 30+ Hours extreme mode) - Height: 64.5 cm - 220 cm - Weight: 12.85 kg - One Man Operation - Self locking and 30 degree + up/down adjustable pole - Run Times > 10 hours (High output, 3 batteries) Application - Drilling - Construction - Maintenance - Events - Mining - Emergency - Infrastructure - Personal Control Board - Power Switch - Brightness - DIM+, DIM- - Battery Level - AC Plug - USB Output Light Brightness Area: 1,100 m2 5 m - 490 lux / 10 m - 120 lux / 20 m - 29 lux / 40 m - 7 lux Battery / AC 100-227V - AC 0-15,000 LM - High 8,000 LM - Medium 5,000 LM - Low 2,500 LM - Extreme 800 LM - Rate Power 28 wh - Rate Voltage 24.5 V - Rate Capacity 40 Ah - Working Temp: -10 to 50 degrees - Working Humidity: -20 to 95% Portable Light Tower Location: Queensland, Australia Learn More

Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn More

Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn More

Make: Globe Drill Model: KAL 500-CP8 Year: 2009 Hours: 27,332 (Lifetime) / Current Hours: 3,406 Engine: Detroit Series 2000 @ 905 HP Engine Hours: 11,982 Onboard Air Capacity: 1,350 CFM / 500 PSI Hole Inclination: 90-50 degrees Rod String: No Rods - Set up for 4 1/2" Inch Rods Depth Capacity On Board: 330 m Overall Width: 3.9 m Compressor Make: Sullair 1,350 CFM 500 PSI Hours: 2,308 Features; - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression - Remote Tramming Track Mounted Drill Rig Location: Western Australia Learn More

74x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn More

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

Make: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn More

*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn More

Wireline Cable: 1,000 m + - Hydraulic Motor - Double Sheave Wheel - Assembly for High Tonnage Winch - Top of Mast Assembly Design Wireline Winch Crown Wheel Assembly Location: Victoria, Australia Learn More

Make / Model: Atlas Copco Size: Unknown Condition: Unknown Air End Location: Western Australia Learn More

Rig Make: UDR Model: 650 Year: 2007 - Fully Rebuilt June 2021 - Complete Service on Mercedes Truck before being parked - Complete Rewire & Control Panel for Sullair Compressor - Invoices and Documentation can be provided Includes; - 2006 Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Air Compressor (Rebuilt & Installed Jan 2019) - 200x Metres of 4" Inch Remet Drill Rods (with Inner Tubes & Saver Subs) 80% New - 50x Metres of 4" Inch Remet Drill Rods + 3 1/2" Inch Gear (Blow Up Cap, Remet Tube Tester & 4" Inch Remet Box to 3 1/2" Inch Remet Pin Saver Subs) 100% New Rig Truck Make: Mercedes Benz Model: Actros 3244 Year: 2006 KM's: 52,228 Type: 8x4 Sea Container 2 - 20ft Powered - Cone Splitter - Set-up for 3 1/2" Inch Rod Handler Gear - Cage with Running Gear - 3x New Head Tubes - 3x New 4" Inch Rod Spanners - Spare Top Swivel - High Pressure Air Hoses 1 1/2" Inch - 2" Inch (some fully socked and variety of lengths) - Spare Wear Bend - 5x New Wear Blocks - Hydraulic Foot Clamps - Set - Spare Hose Cradle - Diamond Rod Cage - Extra UDR Consumables & Parts Sea Container 3 - 20ft - UDR Hammers and Bits - 4x 5" Inch HF 127 mm Bit - Extras - Bits/Subs/Tubes/Head Tubes - 4x RE542-RE543 Bit 127 mm 5" Inch HF - 2x New 543 Sandvik Hammers - 2x 543 Sandvik Hammers @ 60% - PR120 Hammer - 5x 111 mm 2-4.5" Inch New Remet Aircore Bits - 4x 111 mm 2-4.5" Inch Used Remet Aircore Bits - 5x Metzki Bits @ 50% - SR170 Hammer & 4 1/8" Inch TC Bit, Shroud & Inner Tube - 6" Inch Conventional Hammer with Bit Pallets Quantity: 4 - Spares Truck Mounted Drill Rig Package Location: Western Australia Learn More

Make: Sullair Model: Dino DXN12 (ID Plate on 1 Unit Only) - Plus 1 only Disassembled Quantity: 3 High Pressure Compressor Units Rotary Screw Air Ends Location: Western Australia Learn More

Make: FMC Model: L1622HV Triplex Pressure: Maximum 1500 PSI - Minimum 100 PSI Fluids Used: Various grades of muds & water - This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 PSI. - The pump skid weighs only 2450 kg (wet) and only covers an area of 2.4 m x 1.92 m making it very easy to move into restricted areas due to its compact abilities. - Because of its limited size it makes it very easy to transport to various locations. - The pump skid is compact yet practical to access any part of the pumps. Skid Mounted Bean Mud Pump Location: Queensland, Australia Learn More

Tongs Size: 8 5/8" Inch - 9" Inch - Free and working Quantity: 2 Sets Location: Queensland, Australia Learn More

Make: Sandvik Model: G88 Between Ears: 420 mm Pin Size: 100 mm Pin Centres: 590 mm Excavator Hammer Location: Western Australia Learn More

Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn More

Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn More

Down Hole Bits Type / Size: 127 mm Quantity: 15 *New* Location: Northern Territory Learn More