Search results for: 'high for skid bayside ny'

Model: FH2000 Engine: Caterpillar CAT C7.1 Electronic @ 205 kW (275 HP) Pull Back: 280 kN (62,900 lbf) Limited Speed 244.8 kN (55,033 lbf) Full Speed Pull Down: 115 kN (25,853 lbf) Water Pump Options; - Standard FMC W1122BCD 140 lpm @ 1,000 psi - FMC L11-18SC 265 lpm @ 1,800 psi Depth Capacity; NQ Core: 2,030 m HQ Core: 1,377 m Open Hole 3 1/2" Inch Rods: 900 m RC 4 1/2" Inch: 600 m (Nominal) Traverse Speed; Up: 50 m/min (164 ft/min) Down: 39 m/min (128 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 14,324 Nm (10,564 ft/lb) in low gear - 0-1,500 RPM Speed Range - Bosch Rexroth A6VM160 Variable Displacement Motor - High Gear 3:1 & Low Gear 19.57:1 ratios - Adjustable Rotation Torque Control - Infinitely Variable Rotation Speed Control - Floating Spindle 3 1/2" Inch API IF Pin Thread - Pressure Lube Bearings and Gears with filtered and cooled lubrication oil system Main Winch; - Maximum Pull: 156 kN (35,048 lbf) - 120 m/min (394 ft/min) - Mast Top Mounted - Electronic Winch Travel - Fail to safe - 28 mm Main Winch Rope - Safety Factor 3.35:1 (exceeds BS/EN791) - 1x Bosch Rexroth A6VM160 Variable Displacement Motors - 1x Brevini Planetary Reduction Gear Boxes - 1x Multi Disc Brake Units - Fail Safe Spring Activated - Hydraulic Pressure Release Wireline Winch; - Mast Mounted - Maximum Pull: 25 kN (5,617 lbf) - Rope Capacity: 2,100 Metres x 8 mm Rope - Adjustable Position Wireline Spooler - Maximum Speed: 450 m/min (1,476 ft/min) - Adjustable Pull Limiter - Safety Stop System - Wireline Depth Counter as an option New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Model: FH1300 Engine: Caterpillar CAT C7.1 Electronic @ 187 kW (250 HP) Pull Back: 115 kN (25,853 lbf) Actual Pull Down: 70 kN (15,736 lbf) Water Pump Options; - Standard FMC W1122BCD 140 lpm @ 1,000 psi - FMC L11-18SC 265 lpm @ 1,800 psi Depth Capacity; NQ Core: 1,300 m HQ Core: 885 m Open Hole 3 1/2" Inch Rods: 380 m RC 4 1/2" Inch: 220 m (Nominal) Traverse Speed; Up: 60 m/min (196.8 ft/min) Down: 56 m/min (183.7 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 8,087 Nm (6,111 ft/lb) in low gear - 0-1,500 RPM Speed Range - Two Speed Gearbox - High Gear 3.04:1 & Low Gear 12.61:1 ratios - Variable Displacement 160cc Hydraulic Motor - Adjustable Rotation Torque Control - Infinitely Variable Rotation Speed Control - Floating Spindle 3 1/2" Inch API IF Pin Thread - Pressure Lube System with Cooler and Filter Main Winch; - Maximum Pull: 100 kN (10,000 lbf) - 120 m/min (393 ft/min) - Mast Top Mounted - Electronic Winch Travel - Fail to safe - Main Winch Rope - Safety Factor to Meet BS/EN791 - Planetary Reduction Gear Box & Brake - Variable Displacement Hydraulic Motor Drive Wireline Winch; - Deck Mounted - Maximum Pull: 15 kN (3,372 lbf) - Rope Capacity: 1,400 Metres x 6 mm Rope - Adjustable Position Wireline Spooler - Maximum Speed: 450 m/min (1,476 ft/min) - Adjustable Pull Limiter - Safety Stop System - Wireline Depth Counter as an option New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Model: 1750 Scout Engine: Perkins Diesel Torque: 2,500 Nm at 205 bar and 110 RPM Stroke: 1.75 m Pull-Out / Pull-Down: 1,100 kg Capacity (Guide Only): NQ - 60 m / 4" Inch Open Hole - 30 m / 3 1/2" Inch Auger - 15 m - Custom Toyota 33220 Tray - Direct Dive Auger Head with High Torque Head Motor and Fittings - Fine Feed Control - Auger Drive Sub (1 1/8" Inch Hex) - RHS Mast - Tilt Frame for Vehicle/Trailer Mounting - Hydraulic Tilt - Heavy Duty Pull-Down Chain - Nylon Idler Rollers - Standard Auger Guide - Standard Control Panel - Hydraulic Operation - Rain Hood for Motor & Lockable Cage for Spare Wheel & Motor - Remove Throttle and Stop - Water Filter for Fuel / Water Separation - Light Guard for Augers 500 mm to 1,800 mm - Oil Cooler - Simple Rack for Augers Options for Drill; - Hollow Spindle Head and Tooling for Fluid Drilling - 2 Levelling Jacks for Tray Mount Drills - Tilting Rack for Augers - Alternative Engine Options to suit existing fleet Toyota Landcruiser Upgrade Kit; - Roof Racks for Spare Tyre (31678) - Roof Rack Mounts Pair (31679) - GVM Upgrade Spring Kit @ 4,200 kg (Supply Only - 31680) - Bellows Suspension Kit (Supply Only - 31730) - Storage Box LH Under Deck (33249) - Storage Box RH Under Deck (33248) - Under Deck Water Tanks @ 29 Litres (33137) *Ready for mounting to a Toyota 79 Series Landcruiser Cab Chassis* Drill Rig Location: Australia Learn More

Make: Sullair Model: 900XHH / 1150XH Year: 2008 Hours: 3,056 + 200 (ECM Replaced at 3,056) Engine: Caterpillar CAT C15 Diesel Condition: Good Skid Mounted Air Compressor Location: New South Wales, Australia Learn More

Make: Ariel Model: JGP2 Part Number: CL190390 Weight: 388.1 kg Brand New High Pressure Cooler Panels Location: Victoria, Australia Learn More

Make / Model: TL-400 Contains: - Tower - Flashlight - Headlight - Charger - Driver - Battery System D24-100 - USD Output, 5V 2A (2 Dock) for charging Headlight, Flashlight or Mobile Phone - 1-3 Battery Pack (1 Battery 30+ Hours extreme mode) - Height: 64.5 cm - 220 cm - Weight: 12.85 kg - One Man Operation - Self locking and 30 degree + up/down adjustable pole - Run Times > 10 hours (High output, 3 batteries) Application - Drilling - Construction - Maintenance - Events - Mining - Emergency - Infrastructure - Personal Control Board - Power Switch - Brightness - DIM+, DIM- - Battery Level - AC Plug - USB Output Light Brightness Area: 1,100 m2 5 m - 490 lux / 10 m - 120 lux / 20 m - 29 lux / 40 m - 7 lux Battery / AC 100-227V - AC 0-15,000 LM - High 8,000 LM - Medium 5,000 LM - Low 2,500 LM - Extreme 800 LM - Rate Power 28 wh - Rate Voltage 24.5 V - Rate Capacity 40 Ah - Working Temp: -10 to 50 degrees - Working Humidity: -20 to 95% Portable Light Tower Location: Queensland, Australia Learn More

Engine: Caterpillar CAT 3412 V12 Hours: TBA Year: 1997 approx. Air Compressor Make: Sullair 1,800 CFM 200 PSI Booster Make: Aerial 1,800 RPM 500 PSI Air Compressor / Booster Skid Mounted Package Location: Western Australia Learn More

Make: Keypower Model: 6V92TA1400 Max Inlet Pressure: 2,413 kPa / 350 PSI Max. Delivery: 660 l/sec / 1,400 CFM Max. Discharge Pressure: 5,171 / 850 PSI Compression Ratio: 2:1 (Nominal) / 3:1 (Maximum) Bore: 57 mm Stroke: 127 mm Max. Operating Angle: 15 degrees Engine: Detroit 6V92TA Diesel *Not Actual Photo of Unit* Skid Mounted Booster Location: New South Wales, Australia Learn More

Make: Gardner Denver Model: PZ-7 Year: 2014 - Triplex w/ Forged Steel Fluid End & Quick Change Caps - 5M Pulsation Dampener - Oteco 3" Inch Shear Relief Valve - Pressure Gauge - Mission 6x5 Charge Pump - Fitted with 7" Inch Liners & Pistons - No Engine or Transmission Condition: Good Skid Mounted Mud Pump Location: United States of America Learn More

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

Make: Atlas Copco Model: DrillAir XRYS 1260 CD7 Year: 2019 Hours: 2,000 1,260 CFM 550 PSI Skid Mounted Air Compressor Location: New South Wales, Australia Learn More

Make: Air Research ARC Model: 1809/1310 Hours: 900 Engine: Detroit 8V92TA Power: 210 HP Weight: 2,400 kg 1,800 CFM 900 PSI Dimensions Length: 1,900 mm Width: 1,500 mm Height: 2,050 mm Skid Mounted Booster Location: New South Wales, Australia Learn More

Make: Kobit Type: CS N 8K-2-O-2W-H-CONT Flow Meter: 700-25SPA4CX with Mechanical Counter Dimensions Length: 7,250 mm Width: 2,460 mm Height: 2,440 mm / 3,320 mm Approx. Quantity: 2 - Container Double-Skin Wall Skid Mounted Service Bodies Location: Western Australia Learn More

Make: Schramm Model: Typhoon Hours: 5,294 Engine: John Deere 4045DF150 Diesel Skid Mounted Booster Location: Western Australia Learn More

Make: Gardner Denver Model: PZ8 Year: 2009 Diesel Driven Quantity: 2 Skid Mounted Mud Pumps Location: Queensland, Australia Learn More

Wireline Cable: 1,000 m + - Hydraulic Motor - Double Sheave Wheel - Assembly for High Tonnage Winch - Top of Mast Assembly Design Wireline Winch Crown Wheel Assembly Location: Victoria, Australia Learn More

Rig Make: UDR Model: 650 Year: 2007 - Fully Rebuilt June 2021 - Complete Service on Mercedes Truck before being parked - Complete Rewire & Control Panel for Sullair Compressor - Invoices and Documentation can be provided Includes; - 2006 Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Air Compressor (Rebuilt & Installed Jan 2019) - 200x Metres of 4" Inch Remet Drill Rods (with Inner Tubes & Saver Subs) 80% New - 50x Metres of 4" Inch Remet Drill Rods + 3 1/2" Inch Gear (Blow Up Cap, Remet Tube Tester & 4" Inch Remet Box to 3 1/2" Inch Remet Pin Saver Subs) 100% New Rig Truck Make: Mercedes Benz Model: Actros 3244 Year: 2006 KM's: 52,228 Type: 8x4 Sea Container 2 - 20ft Powered - Cone Splitter - Set-up for 3 1/2" Inch Rod Handler Gear - Cage with Running Gear - 3x New Head Tubes - 3x New 4" Inch Rod Spanners - Spare Top Swivel - High Pressure Air Hoses 1 1/2" Inch - 2" Inch (some fully socked and variety of lengths) - Spare Wear Bend - 5x New Wear Blocks - Hydraulic Foot Clamps - Set - Spare Hose Cradle - Diamond Rod Cage - Extra UDR Consumables & Parts Sea Container 3 - 20ft - UDR Hammers and Bits - 4x 5" Inch HF 127 mm Bit - Extras - Bits/Subs/Tubes/Head Tubes - 4x RE542-RE543 Bit 127 mm 5" Inch HF - 2x New 543 Sandvik Hammers - 2x 543 Sandvik Hammers @ 60% - PR120 Hammer - 5x 111 mm 2-4.5" Inch New Remet Aircore Bits - 4x 111 mm 2-4.5" Inch Used Remet Aircore Bits - 5x Metzki Bits @ 50% - SR170 Hammer & 4 1/8" Inch TC Bit, Shroud & Inner Tube - 6" Inch Conventional Hammer with Bit Pallets Quantity: 4 - Spares Truck Mounted Drill Rig Package Location: Western Australia Learn More

Make: Sykes Model: VP150i Pump Speed: 1,500 RPM Max Pressure: 230 kPa Best Pressure: 167 kPa Min Pressure: 133 kPa 150 x 150 x 285 Skid Mounted Pump Location: Queensland, Australia Learn More

Make: Newage Stamford Model: SC634B Year: 1999 Hours: 371 Engine: Detroit 12V149 Diesel Quad Turbo + Twin Super Charged @ 800 HP - Control Cabinet - 4x Bolt On, Fold Up and Down Steel Walk Platforms for Side Access - 760 kVA / 1057 AMPS / 415 Volt - Load Tested 12 months ago and stored since - unused - Video of load test available on request - Batteries Included - Battery Holder / Stand - 1000 Litre Fuel Tank Available (Not original, but easily plumbed by competent person) - Fuel Tank Stand - Muffler and Engine Pipes Included Skid Mounted Generator Location: Victoria, Australia Learn More

Make: Sullair Model: Dino DXN12 (ID Plate on 1 Unit Only) - Plus 1 only Disassembled Quantity: 3 High Pressure Compressor Units Rotary Screw Air Ends Location: Western Australia Learn More