Search results for: 'hose for size 1,350'

Includes; - Alfagomma Sample Hose - Spin Cage - Rod Slide - Offsiders Deck Drill Rig Cage & Platform Location: Queensland, Australia Learn More

Make: Iveco Model: Eurotech Year: 2000 KM's: 83,254 Type: 8x4 GVM: 31,000 kg Cab Chassis - 120 m of 4" Inch Metzke Drill Pipe - 2,000 Litre Double Bunded Diesel Tank - 9,000 Litre Water Tank - 12 V Diesel Transfer Pump - Diesel Pump Tools + More - Hose Reel Support Truck Location: Queensland, Australia Learn More

Hammer Size: 12" Inch Drill Bit Size: 20" Inch - With SD12 Shank (Unused) Location: Queensland, Australia Learn More

Front Air Compressor Make: Sullair Model: 1,150 CFM / 350 PSI Year: 1998 Hours: 2,408 Engine: Cummins KTA19 Rear Air Compressor Make: Doosan Model: 1,350 CFM / 350 PSI Year: 1998 Hours: 977 Engine: Cummins K19 Condition: Serviceable - Both have current in date working Fire Suppression Systems - Active Shut Down Circuits - Mounted on a Howard Porter Licensed Trailer Twin Air Compressors Trailer Mounted Location: Western Australia Learn More

Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn More

Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn More

Make: Globe Drill Model: KAL 500-CP8 Year: 2009 Hours: 27,332 (Lifetime) / Current Hours: 3,406 Engine: Detroit Series 2000 @ 905 HP Engine Hours: 11,982 Onboard Air Capacity: 1,350 CFM / 500 PSI Hole Inclination: 90-50 degrees Rod String: No Rods - Set up for 4 1/2" Inch Rods Depth Capacity On Board: 330 m Overall Width: 3.9 m Compressor Make: Sullair 1,350 CFM 500 PSI Hours: 2,308 Features; - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression - Remote Tramming Track Mounted Drill Rig Location: Western Australia Learn More

74x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn More

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

Make: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn More

*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn More

Make / Model: Atlas Copco Size: Unknown Condition: Unknown Air End Location: Western Australia Learn More

Rig Make: UDR Model: 650 Year: 2007 - Fully Rebuilt June 2021 - Complete Service on Mercedes Truck before being parked - Complete Rewire & Control Panel for Sullair Compressor - Invoices and Documentation can be provided Includes; - 2006 Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Air Compressor (Rebuilt & Installed Jan 2019) - 200x Metres of 4" Inch Remet Drill Rods (with Inner Tubes & Saver Subs) 80% New - 50x Metres of 4" Inch Remet Drill Rods + 3 1/2" Inch Gear (Blow Up Cap, Remet Tube Tester & 4" Inch Remet Box to 3 1/2" Inch Remet Pin Saver Subs) 100% New Rig Truck Make: Mercedes Benz Model: Actros 3244 Year: 2006 KM's: 52,228 Type: 8x4 Sea Container 2 - 20ft Powered - Cone Splitter - Set-up for 3 1/2" Inch Rod Handler Gear - Cage with Running Gear - 3x New Head Tubes - 3x New 4" Inch Rod Spanners - Spare Top Swivel - High Pressure Air Hoses 1 1/2" Inch - 2" Inch (some fully socked and variety of lengths) - Spare Wear Bend - 5x New Wear Blocks - Hydraulic Foot Clamps - Set - Spare Hose Cradle - Diamond Rod Cage - Extra UDR Consumables & Parts Sea Container 3 - 20ft - UDR Hammers and Bits - 4x 5" Inch HF 127 mm Bit - Extras - Bits/Subs/Tubes/Head Tubes - 4x RE542-RE543 Bit 127 mm 5" Inch HF - 2x New 543 Sandvik Hammers - 2x 543 Sandvik Hammers @ 60% - PR120 Hammer - 5x 111 mm 2-4.5" Inch New Remet Aircore Bits - 4x 111 mm 2-4.5" Inch Used Remet Aircore Bits - 5x Metzki Bits @ 50% - SR170 Hammer & 4 1/8" Inch TC Bit, Shroud & Inner Tube - 6" Inch Conventional Hammer with Bit Pallets Quantity: 4 - Spares Truck Mounted Drill Rig Package Location: Western Australia Learn More

Make: FMC Model: L1622HV Triplex Pressure: Maximum 1500 PSI - Minimum 100 PSI Fluids Used: Various grades of muds & water - This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 PSI. - The pump skid weighs only 2450 kg (wet) and only covers an area of 2.4 m x 1.92 m making it very easy to move into restricted areas due to its compact abilities. - Because of its limited size it makes it very easy to transport to various locations. - The pump skid is compact yet practical to access any part of the pumps. Skid Mounted Bean Mud Pump Location: Queensland, Australia Learn More

Make: General Breaker Model: GB7TL/GB8ATL Weight: 18-22 Tonne Titan Headplate: 80 mm pins, 320 mm ears and 470 mm centers - Industry standard breaker with Australian dealer and parts support - Comes with toolbox containing gas charge kit, tools and spares Full in house rebuild with the following new parts; - Tie Rods - Tool Retainers - Upper and Lower Bushes - Full Seal Kit - Charge Valve - Wedge Chisel - All Hardware and Fasteners Flame Resistant Hydraulic Hoses Piston and Bore in Perfect Condition Transport and Storage Stand Supplied Operators Manual in PDF Full 12 month Workshop warranty supplied Excavator Hammer Rock Breaker Location: Australia Learn More

Tongs Size: 8 5/8" Inch - 9" Inch - Free and working Quantity: 2 Sets Location: Queensland, Australia Learn More

Make: Sandvik Model: G88 Between Ears: 420 mm Pin Size: 100 mm Pin Centres: 590 mm Excavator Hammer Location: Western Australia Learn More

Rig Make: Edson Model: 8000 Year: 1993 Hours: 4,600 Engine: Cummins 855 @ 300 HP Deck Engine Mast: 11.5 m Pullback: 16 Tonne Stroke: 7 m Includes; - Dump Mast & Sliding Base - 13 Tonne Winch - 9 m Rod Pull - Head Side Rack - 2 Tonne Wireline Winch - Dual W1122 Bean Pumps - Foot Clamps - Overshot - Burst Protection on Hosing - E-Stops - Has Fire Suppression System Installed (Out of date) Rig Truck Make / Model: International Engine: Cummins 855 @ 400 HP Type: 8x4 - Road Ranger Box Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn More

Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn More