Search results for: 'hoses for side in cherry hire nj'

Tray Length: 12 m (Not Including Power Pack) Width: 3.2 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More

Tray Length: 10 m (Not Including Power Pack) Width: 2.5 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More

Make: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn More

*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn More

Rig Make: UDR Model: 650 Year: 2007 - Fully Rebuilt June 2021 - Complete Service on Mercedes Truck before being parked - Complete Rewire & Control Panel for Sullair Compressor - Invoices and Documentation can be provided Includes; - 2006 Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Air Compressor (Rebuilt & Installed Jan 2019) - 200x Metres of 4" Inch Remet Drill Rods (with Inner Tubes & Saver Subs) 80% New - 50x Metres of 4" Inch Remet Drill Rods + 3 1/2" Inch Gear (Blow Up Cap, Remet Tube Tester & 4" Inch Remet Box to 3 1/2" Inch Remet Pin Saver Subs) 100% New Rig Truck Make: Mercedes Benz Model: Actros 3244 Year: 2006 KM's: 52,228 Type: 8x4 Sea Container 2 - 20ft Powered - Cone Splitter - Set-up for 3 1/2" Inch Rod Handler Gear - Cage with Running Gear - 3x New Head Tubes - 3x New 4" Inch Rod Spanners - Spare Top Swivel - High Pressure Air Hoses 1 1/2" Inch - 2" Inch (some fully socked and variety of lengths) - Spare Wear Bend - 5x New Wear Blocks - Hydraulic Foot Clamps - Set - Spare Hose Cradle - Diamond Rod Cage - Extra UDR Consumables & Parts Sea Container 3 - 20ft - UDR Hammers and Bits - 4x 5" Inch HF 127 mm Bit - Extras - Bits/Subs/Tubes/Head Tubes - 4x RE542-RE543 Bit 127 mm 5" Inch HF - 2x New 543 Sandvik Hammers - 2x 543 Sandvik Hammers @ 60% - PR120 Hammer - 5x 111 mm 2-4.5" Inch New Remet Aircore Bits - 4x 111 mm 2-4.5" Inch Used Remet Aircore Bits - 5x Metzki Bits @ 50% - SR170 Hammer & 4 1/8" Inch TC Bit, Shroud & Inner Tube - 6" Inch Conventional Hammer with Bit Pallets Quantity: 4 - Spares Truck Mounted Drill Rig Package Location: Western Australia Learn More

Make: Almet Model: 238FF Quantity: 3 Rotary Side Swivels Location: Queensland, Australia Learn More

Make: Sykes Model: VP150i Pump Speed: 1,500 RPM Max Pressure: 230 kPa Best Pressure: 167 kPa Min Pressure: 133 kPa 150 x 150 x 285 Skid Mounted Pump Location: Queensland, Australia Learn More

Make / Model: Solar Generators - Full Solar Data Logging - Full Monthly Data Logging for Carbon Offsets Peak Power: 6 kW Continuous: 2.4 kW Battery Storage: 12 kWh Solar Power: 2,520 W Weight: 750 kg appox. Pricing: 1-7 days $120.00 per day ex GST 8-30 days $105.00 per day ex GST Trailer Location: New South Wales, Australia Learn More

Make: Newage Stamford Model: SC634B Year: 1999 Hours: 371 Engine: Detroit 12V149 Diesel Quad Turbo + Twin Super Charged @ 800 HP - Control Cabinet - 4x Bolt On, Fold Up and Down Steel Walk Platforms for Side Access - 760 kVA / 1057 AMPS / 415 Volt - Load Tested 12 months ago and stored since - unused - Video of load test available on request - Batteries Included - Battery Holder / Stand - 1000 Litre Fuel Tank Available (Not original, but easily plumbed by competent person) - Fuel Tank Stand - Muffler and Engine Pipes Included Skid Mounted Generator Location: Victoria, Australia Learn More

Make / Model: CE100 Year: 2013 (Rebuilt completed in 2022) Hours: 551 - Fully Re-Engineered - NDT Testing Completed - CT14 Hydraulic Operating System - NQ, HQ, PQ Drilling Capabilities - Up to date Safety Stop Systems - Engineered and compliant hand rail and walkway system and access ladders - Full lighting for N/S operations - Certified FOPS on driller platform - Running new Danfos Primary Hydraulic Pump at >3500 PSI direct from John Deere 127 HP - 165 HP engine - 5.7 Tonne Main Winch with certified 16mm Winch Rope - A new AMC Main Water Pump <1000 PSI with a PRV Valve Set @750 PSI - New Stryker 45ltr Certified Fire Suppression system installed - A UDR Rod Spinner has been engineered into mast structure for hands free operation of tripping rods - A hydraulic operated Breakout Spanner allows for breakout of rod joins or subs - Tungsten inserts interchangeable on Breakout Spanner - UDR Foot Clamp assembly added for ease of maintenance and clamping of rod string Diamond Core Track Mounted Drill Rig Location: Western Australia Learn More

Make: General Breaker Model: GB7TL/GB8ATL Weight: 18-22 Tonne Titan Headplate: 80 mm pins, 320 mm ears and 470 mm centers - Industry standard breaker with Australian dealer and parts support - Comes with toolbox containing gas charge kit, tools and spares Full in house rebuild with the following new parts; - Tie Rods - Tool Retainers - Upper and Lower Bushes - Full Seal Kit - Charge Valve - Wedge Chisel - All Hardware and Fasteners Flame Resistant Hydraulic Hoses Piston and Bore in Perfect Condition Transport and Storage Stand Supplied Operators Manual in PDF Full 12 month Workshop warranty supplied Excavator Hammer Rock Breaker Location: Australia Learn More

Make: Atlas Copco Model: XRVS 1050 Year: 2017 Hours: 816 Wheel Mounted Air Compressor Location: New South Wales, Australia Learn More

Rig Make: Edson Model: 8000 Year: 1993 Hours: 4,600 Engine: Cummins 855 @ 300 HP Deck Engine Mast: 11.5 m Pullback: 16 Tonne Stroke: 7 m Includes; - Dump Mast & Sliding Base - 13 Tonne Winch - 9 m Rod Pull - Head Side Rack - 2 Tonne Wireline Winch - Dual W1122 Bean Pumps - Foot Clamps - Overshot - Burst Protection on Hosing - E-Stops - Has Fire Suppression System Installed (Out of date) Rig Truck Make / Model: International Engine: Cummins 855 @ 400 HP Type: 8x4 - Road Ranger Box Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Chengdu Zhonghang Machinery Model: F-500 Year: 2012 Hours: TBA Pump Speed: 165 r/min Engine: 2011 Cummins QSX15 Trailer Mounted Triplex Mud Pump Location: Queensland, Australia Learn More

Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn More

W446 Mud Pump Engine: Silenced Caterpillar CAT C-15 Oil & Gas Compliant Trailer Type: Tandem Semi Trailer Year: 2013 Aggregate Trailer Mass: 27,000 kg Tare: 22,320 kg Registered - Expiry Date: 06/08/2020 *For more information, please contact us* Location: Queensland, Australia Learn More

Make: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Has a stand alone fuel tank* Location: Queensland, Australia Learn More

Make: Air Research Model: 8v92 Engine: Detroit Diesel 8v92TA @ 230 HP / 1,800 RPM / 12 Volt 2 Stage Reciprocating Pressure: 1,000 PSI / 2,200 CFM Inlet Pressure: 350 HP Direct Drive: 1,800 RPM Dimensions (L x W x H): 2.350 m x 1.1700 m x 2.000 m Weight: 3.0 Tonne Wet Skid Mounted Booster Location: Queensland, Australia Learn More

Make: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Doesn't have a stand alone fuel tank* Location: Queensland, Australia Learn More

Make: Sullair Model: 900XHH / 1150XH Hours: Approx 2,500 / Approx Less than 500 CFM: 900 / 1150 PSI: 500 / 350 Engine: Caterpillar C-15 ATAAC Engine Displacement: 928 in3 / 15.2 cc Cylinders: 6 Cycles: 4 Bore & Stroke: 5.40 x 6.7 in / 137 x 171 mm RPM: 1800 Power: 540 hp / 403 kW Tri-Axle Mount (DTQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 92 inch / 2,337 mm Less Running Gear (DLQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 83 inch / 2,108 mm 4 - Wheel Mount (DWQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 99 inch / 2,515 mm Track Width Tri-Axle Mount (DTQ) 77 inch / 1,956 mm 4 - Wheel Mount (DWQ) 78 inch / 1,981 mm Weight: 16,040 lb / 7,276 kg *For more information, please contact us* Location: Queensland, Australia Learn More