Search results for: 'intern float pursue for size'

2004 Cubex QXR 920 Track Mounted Surface Drill Rig ($185,000 ex GST) (sale-ehub3439)

For Sale

$185,000.00

Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn More

Machine hours	16,896	KILOMETERS	N/A
YEAR	2004	BRAND	Cubex
LOCATION	Western Australia	MODEL	QXR 920

Add to Wish List Add to Compare

FMC L1122 Horizontal Triplex Piston Pumps (POA) (sale-ehub3435)

For Sale

$0.00

Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	FMC
LOCATION	New South Wales, Australia	MODEL	L1122

Add to Wish List Add to Compare

Various Size, Shank, Head & Insert Halco & Karbo Drill Bits (POA) (sale-ehub3430)

For Sale

$0.00

74x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Canada	MODEL	Halco Mach 44/303 & Karbo

Add to Wish List Add to Compare

Custom 600 RRD Track Mounted Drill Rig (POA) (sale-ehub3428)

For Sale

$0.00

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Home Made
LOCATION	Canada	MODEL	600 RRD

Add to Wish List Add to Compare

6x Sandvik DR560/80 Track Mounted Contour DTH Drill Rigs (FOR HIRE/RENT - POA) (hire-ehub3356)

For Hire

Make: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn More

Machine hours	Various	KILOMETERS	N/A
YEAR	N/A	BRAND	Sandvik
LOCATION	Western Australia	MODEL	DR560/80

Add to Wish List Add to Compare

2005 UDR1000 / Sandvik DE840 Multipurpose Drill Rig Mounted on MAN 8x4 Truck ($275,000 ex GST) (sale-ehub3353)

For Sale

$275,000.00

Make: UDR / Sandvik Model: 1000 / DE840 Year: 2005 Engine: Cummins 6CTA8.3 - Hydraulic Rod Clamp - Top Drive Rotary Head - Hollow Floating Spindle - Onboard FMC W1122 Bean Pump - Onboard Sullair 1150 CFM / 350 PSI Air Compressor - Still operational but due for a rebuild Includes; - Mast Dump - Rod Spinner - Sandvik DA554 Rod Handler - RC Sampling System - Fire Suppression Truck Make: MAN Type: 8x4 Truck Mounted Multipurpose Drill Rig Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2005	BRAND	UDR
LOCATION	New South Wales, Australia	MODEL	1000 / Sandvik DE840

Add to Wish List Add to Compare

Various Hose Restraints, Cable Stockings, Safety Shackles & Cambuckles / Hose Straps (POA) (sale-ehub3284)

For Sale

$0.00

*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	See Description for Sizes

Add to Wish List Add to Compare

Rail Gantry RGC Heavy Lift 500 Tonne Crane ($765,000 ex GST) (sale-ehub3281)

For Sale

$765,000.00

Make: Rail Gantry Model: RGC Load Capacity: 500 Tonne Lifting Speed Under Loading: 0.5m/min Trolley Running Speed: 1m/min Crane Running Speed: 0.10m/min - Only used for 1-2 lifts - Basically New & already dismantled for shipping - CIMOLAI Technology Spa will also be able to provide installation anywhere around the world Dimensions Internal Width: 15 mt Max Width: 18.3 mt Lifting Height: 22 m from top to 46 m underground Crane Location: Italy Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Rail Gantry
LOCATION	Italy	MODEL	RGC

Add to Wish List Add to Compare

Atlas Copco Air End (Open to Offers) (sale-ehub3220)

For Sale

$0.00

Make / Model: Atlas Copco Size: Unknown Condition: Unknown Air End Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Atlas Copco
LOCATION	Western Australia	MODEL	Atlas Copco

Add to Wish List Add to Compare

FMC L1622HV Triplex Bean Skid Mounted Mud Pumps (POA) (sale-ehub3076)

For Sale

$0.00

Make: FMC Model: L1622HV Triplex Pressure: Maximum 1500 PSI - Minimum 100 PSI Fluids Used: Various grades of muds & water - This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 PSI. - The pump skid weighs only 2450 kg (wet) and only covers an area of 2.4 m x 1.92 m making it very easy to move into restricted areas due to its compact abilities. - Because of its limited size it makes it very easy to transport to various locations. - The pump skid is compact yet practical to access any part of the pumps. Skid Mounted Bean Mud Pump Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	FMC
LOCATION	Queensland, Australia	MODEL	L1622HV

Add to Wish List Add to Compare

2 Sets x 8 5/8" Inch - 9" Inch Tongs ($9,500 ex GST) (sale-ehub2006)

For Sale

$9,500.00

Tongs Size: 8 5/8" Inch - 9" Inch - Free and working Quantity: 2 Sets Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	8 5/8" Inch - 9" Inch

Add to Wish List Add to Compare

Various Seamless Steel Drill Pipe with Tool Joints (POA) (sale-ehub2005)

For Sale

$0.00

Seamless Steel Drill Pipe with Tool Joints API Specification 5DP PSL 1 - 35" Inch Pin Taper Shoulder - Tool Joints will be included with 18 Deg Box - 2" Inch XL Tong Space & Threads shall be phosphatised - Internal Plastic Coating - Fitted with presses steel thread protectors on both ends - Shall be coated on the outside with rust preventing coating to withstand marine transportation. - Will be API Monogrammed Quantity: Various *Brand New* Drill Pipe Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	New South Wales, Australia	MODEL	N/A

Add to Wish List Add to Compare

Sandvik G88 Excavator Hammer (POA) (sale-ehub1992)

For Sale

$0.00

Make: Sandvik Model: G88 Between Ears: 420 mm Pin Size: 100 mm Pin Centres: 590 mm Excavator Hammer Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Sandvik
LOCATION	Western Australia	MODEL	G88

Add to Wish List Add to Compare

1990 International T-Line T2670 8x4 Support Truck with Atlas Copco XRVS 976CD Air Compressor ($100,000 ex GST) (sale-ehub1942)

For Sale

$100,000.00

Make: International Model: T-Line T2670 Year: 1990 KM's: TBA Type: 8x4 Chassis / Cab Seats: 2 Compressor Make: Atlas Copco Model: XRVS 976CD Year: 2005 Hours: 5,674 Weight: 5,500 kg 317 kW Support Truck Air Compressor Location: Queensland, Australia Learn More

Machine hours	5,674 (Compressor)	KILOMETERS	N/A
YEAR	1990	BRAND	International
LOCATION	Queensland, Australia	MODEL	T-Line T2670

Add to Wish List Add to Compare

1988 Sandvik UDR650 Drill Rig Mounted on 1988 International 2250-D Truck ($295,000 ex GST) (sale-ehub1933)

For Sale

$295,000.00

Rig Make: Sandvik Model: UDR650 Year: 1988 Hours: 6,568 - Historical Maintenance / Service Records Available - UDR650 Equipment Manuals - Upgrade - Mast Replaced March 2019 - Equipment upgraded / refitted every year to comply with standards and maintenance - Department of Transport Pit Inspections - Yearly - Compliance Certifications - NDT - Yearly - Lifting Register - Bi-Annual - Fire Extinguishers - Bi-Annual - Brake Tests - Bi-Annual - Spare Mast & Traverse Cylinder Included - No Onboard Air Compressor - Traverse cylinder - Tower / Mast (The mast was replaced approx. 3 years ago) - Steel hydraulic piping up the tower - New back plate for the Head Rack Truck Make: International Model: 2250-D Year: 1988 KM's: 94,122 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Machine hours	6,568	KILOMETERS	94,122
YEAR	1988	BRAND	Sandvik
LOCATION	Queensland, Australia	MODEL	UDR650

Add to Wish List Add to Compare

Humpy Site Office / Workshop Trailers (POA) (sale-ehub1893)

For Sale

$0.00

Specifications; - 50 mm Tow-Ball Coupling & Dual Safety Chains - 50 mm Solid Square Axles - 9 Leaf Load Share Suspension - 12" Inch Electric Brakes - Electric Breakaway Unit - LED Tail, Indicator and Marker Lights - 15" Inch Sunraiser Wheels with 8 Ply Light Truck Tyres - 2 x Spare Wheels - 4 x Adjustable Stabiliser Legs Dimensions; Transport Width: 2.45 m Transport Height: 3.0 m Transport Length: 5.5 m Capacities; - Tare Weight: 2,500 kg to 2,750 kg - ATM: 3,500 kg Functions & Features; - Pigeonholes and under-bench tool storage - 125 mm Multipurpose Vice - Tooling and Hard Hat Hooks - 1 x Personal Access Door - Microwave - Fridge - Storage Cabinets - 5.5 kW Diesel Generator - 4 x Double Power Point GPO 10 AMP - 3.5 kW Daiken Split System Air Conditioner - Water Tank & Hand Wash Station - 8 x 12V/24V LED External Lights - 2 x 240v LED Internal Lighting - Retractable Awning - Dual Wheel Chocks Options; - Open Layout - Open plan full walkthrough - Split Layout - Separate workshop and office Roof mounted AC Unit (Domestic IBIS 4) Two-piece Rear Door 8.0 kW Diesel Generator Humpty Site Office / Workshop Trailers Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	N/A

Add to Wish List Add to Compare

1993 Edson 8000 Drill Rig Mounted on International 8x4 Truck ($190,000 ex GST) (sale-ehub1892)

For Sale

$190,000.00

Rig Make: Edson Model: 8000 Year: 1993 Hours: 4,600 Engine: Cummins 855 @ 300 HP Deck Engine Mast: 11.5 m Pullback: 16 Tonne Stroke: 7 m Includes; - Dump Mast & Sliding Base - 13 Tonne Winch - 9 m Rod Pull - Head Side Rack - 2 Tonne Wireline Winch - Dual W1122 Bean Pumps - Foot Clamps - Overshot - Burst Protection on Hosing - E-Stops - Has Fire Suppression System Installed (Out of date) Rig Truck Make / Model: International Engine: Cummins 855 @ 400 HP Type: 8x4 - Road Ranger Box Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	1993	BRAND	Edson
LOCATION	Queensland, Australia	MODEL	8000

Add to Wish List Add to Compare

2008 Atlas Copco ROC D9C Blast Hole Track Mounted Drill Rig ($117,500 ex GST) (sale-ehub1722)

For Sale

$117,500.00

Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn More

Machine hours	12,000 - 13,000	KILOMETERS	N/A
YEAR	2008	BRAND	Atlas Copco
LOCATION	Queensland, Australia	MODEL	ROC D9C

Add to Wish List Add to Compare

15 x *New* 127 mm Down Hole Bits ($550 ex GST each) (sale-ehub1615)

For Sale

$550.00

Down Hole Bits Type / Size: 127 mm Quantity: 15 *New* Location: Northern Territory Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Northern Territory	MODEL	N/A

Add to Wish List Add to Compare

Edson MP4000 Diamond Core Drill Rig Mounted on MAN TGM 26.340 6x4 Truck (Open to Offers) (sale-ehub1553)

For Sale

$0.00

Rig Make: Edson Model: MP4000 Engine: Perkins Diesel 6.0L Custom Pack (185 HP @ 2200 RPM) Water Pump: FMC John Bean L09-18HD-BCD Water Pump Variable Speed: 2,501/min @ 70 bar Mast: 6 m Rod Pull / 2 m Dump Rebuilt 2017 - 2 Speed Multi-Purpose Head with Floating Spindle Truck Make: MAN Model: TGM 26.340 Type: 6x4 Low KM's Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	Low KM's
YEAR	2017	BRAND	Edson
LOCATION	Western Australia	MODEL	MP4000

Add to Wish List Add to Compare

Search results for: 'intern float pursue for size'

AUSTRALIA WIDE SERVICE

REQUIRE ASSISTANCE - HAVE A QUESTION?

EQUIPMENT FOR HIRE OR FOR SALE