Search results for: 'mobil axle coffee taxable set for size'

2016 Hanjin D&B-8D Track Mounted Drill Rig ($107,500 ex GST) (sale-ehub3839)

For Sale

$107,500.00

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - 1x Set of NQ Jaws *New* - 1x Set of HQ Jaws *New* - Cameron Water Gauge *New* - Wrap Around Mast - SPT Hammer Included - Rod Racks - Suction Hose and 2x Double Braid 1" Inch Duffield Bypass Hoses - 5x 100 mm Augers and 1x Bit Plus Drive Sub - 1 1/2" Inch Centrifugal Pump and Hoses - Plus Camlocks *All New* - 36" Inch & 24" Inch Stilsons - Chain Wrench - 1.5 Metre NMLC Core Barrel Plus 5x 3 Metre NQ Rods - 2x Mud Tanks - 7x5' Foot Box Trailer Tracked Mounted Drill Rig Location: New South Wales, Australia Learn More

Machine hours	5,800	KILOMETERS	N/A
YEAR	2016	BRAND	Hanjin
LOCATION	New South Wales, Australia	MODEL	D&B-8D

Add to Wish List Add to Compare

DCS-S 4-4.7/8" Inch Drilling Collar Casing Slip Bowls (POA) (sale-ehub3795)

For Sale

$0.00

Type: DCS-S 4-4.7/8" Inch - Comes with 1x Set of Inserts Drilling Collar Slips Casing Slip Bowls Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	DCS-S 4-4.7/8" Inch

Add to Wish List Add to Compare

Edson Versadrill 300 Drill Rig Mounted on Toyota Landcruiser Ute ($125,000 ex GST) (sale-ehub3781)

For Sale

$125,000.00

Rig Make: Edson Model: Versadrill 300 Year: 1996 Engine: Hatze - 6x6 Multidrive Technology - Rotation head MR260 Rotation hollow spindle, single speed, dial in, rotation head around 120 rpm - Winching gear on back of mast for hollow augering - Can do diamond drilling if you were to change the hydraulic motor - Dump Mast - Near New Hydraulic Pump - 4x Leveling Jacks - Currently doing 80mtr holes at 4.5” - Client used to aircore with it, but currently set up doing mud - Used to do a lot of Geotech work, 6” hollow augering - Southern Cross Mud pump on the side - 3.2 mtr Stroke - 3 mtr Rods - Extension arm to run 6mtr casing into the ground Ute Make: Toyota Model: Landcruiser Year: 1990 KM's: 107,000 Ute Mounted Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	107,000
YEAR	1996	BRAND	Edson
LOCATION	Western Australia	MODEL	Versadrill 300

Add to Wish List Add to Compare

150N Track Mounted Multi Purpose Drill Rig (New Build - POA) (sale-ehub3725)

For Sale

$0.00

Model: 150N Engine: John Deere / FPT Iveco / Kirloskar / Deutz Pull Up Force: 5,000 kg Pull Down Force: 3,750 kg Tool Winch Hoisting Capacity: 2,500 kg (Bare Drum) Wireline Winch Hoisting Capacity: 500 kg (Bare Drum) Diamond Core Drilling Capacity; NQ Size: 150 m HQ Size: 90 m PQ Size: 60 m Water Pump; Max Flow: 120 LPM Max Pressure: 30 bar Type: Triplex Piston Pump Track Mounted Multi Purpose Drill Rig Location: United Arab Emirates Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	United Arab Emirates	MODEL	MD150N

Add to Wish List Add to Compare

75N Compact Geotechnical Drill Rig (New Build - POA) (sale-ehub3724)

For Sale

$0.00

Model: 75N Engine: Kirloskar / Deutz / John Deere Pull Up Force: 2,500 kg Pull Down Force: 2,500 kg Tool Winch Hoisting Capacity: 1,500 kg Diamond Core Drilling Capacity; NQ Size: 75 m HQ Size: 45 m PQ Size: 30 m Mud Rotary; 30 m @ 150 mm Diameter Auger Drilling; 20 m @ 150 mm Diameter 4 m @ 300 mm Diameter Water Pump; Max Flow: 85 LPM / 140 LPM Max Pressure: 30 bar / 18 bar Type: Triplex Piston Pump / Progressive Cavity Pump Compact Geotechnical Drill Rig Location: United Arab Emirates Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	United Arab Emirates	MODEL	75N

Add to Wish List Add to Compare

Kitchen, Lunch/Work Space Room + Storage Dual-Axle Van (FOR HIRE/RENT - POA) (hire-ehub3708)

For Hire

Includes; - Kitchen - Lunch Room / Work Space Room - Storage Dual-Axle Van Location: Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Australia	MODEL	Dual Axle

Add to Wish List Add to Compare

2,500 Litre Mobile Keg Beer & Chill Cold Room Galvanised Trailer ($19,500 ex GST) (sale-ehub3698)

For Sale

$19,500.00

Generator: Honda 2kVA Dimensions; Length: 4 Metres (Inc. Trailer) Width: 1.6 Metres Height: 2.5 Metres Cold Room: 1.2 m x 1.2 m x 1.8 m - Fully Insured & Ready to Go - Mobile- Galvanised Trailer - 2,500 Litre Cold Room - Holds 4x Kegs with 4x Taps (2 Either Side) - Drip Trays on Both Sides - Extra Cold Room Storage - Pull Out Shade Cloths on Both Sides - Party Hire - Camping - Beach Party (Trailer is Purpose Built) - Functions - Corporate - Event Management - Fundraisers Mobile Keg & Chill Cold Room Trailer Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	2,500 Litre Mobile Keg & Chill Cold Room Galvanised Trailer

Add to Wish List Add to Compare

FMC M28 Mud Pump + More Mounted on Tri-Axle Package ($180,000 ex GST) (sale-ehub3694)

For Sale

$180,000.00

Mud Pump Make: FMC Model: M28 Engine: Scania DS16 @ 2,000hrs 700HP - 700 HP Hydraulic Drive - Mixing Tank - Shale Shaker - Cyclone Cleaning System Tri-Axle Trailer Package Location: Western Australia Learn More

Machine hours	2000	KILOMETERS	N/A
YEAR	N/A	BRAND	FMC
LOCATION	Western Australia	MODEL	M28

Add to Wish List Add to Compare

Mole Pioneer P400S 450HQ Drill Rig Mounted on Ford Cargo Series 6x4 Truck with Onboard W1122 Bean Pump (Open to Offers) (sale-ehub2080)

For Sale

$0.00

Make: Mole Pioneer Model: P400S 450HQ Hours: 2,940 Engine: Perkins 119 kW Diesel - Onboard W1122 Bean Pump Rotation Head Model: KL400 Top Drive Stroke: 1,200 mm Drilling Angle: 90 degrees vertical to 45 degrees horizontal Drilling Depth Capacity B Size: 900 metres N Size: 700 metres H Size: 450 metres P Size: 275 metres Truck Make: Ford Model: Cargo Series KM's: 25,372 Year: 1985 Type: 6x4 Condition: Good *For more information, please contact us* Mole Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Machine hours	2,940	KILOMETERS	25,372
YEAR	1985	BRAND	Mole Pioneer
LOCATION	Queensland, Australia	MODEL	P400S 450HQ

Add to Wish List Add to Compare

Kitchen, Lunch/Work Station Room + Generator & Bathroom Tri-Axle Van (FOR HIRE/RENT - POA) (hire-ehub3582)

For Hire

Includes; - Kitchen - Lunch Room / Work Station Room - Generator - 2x Toilets Tri-Axle Van Location: Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Australia	MODEL	Tri-Axle

Add to Wish List Add to Compare

Q80K, Q150K & Q280K Rotation Head Gearboxes (POA) (sale-ehub3576)

For Sale

$0.00

Q80K - Top Head Drive - 0-8,328 Nm (6,142 ft/lbf) in low gear - High Gear 3.04:1 Ratio - Low Gear 12.61:1 Ratio - Shift between High and Low Gear Ratios - 0-1,500 RPM Speed Range - Splined Floating Spindle - Independent Pressurized Lubrication System - Gearbox oil level inspection windows - Variable Speed Hydraulic Motor - Gear train for High/Low Ratio Q150K - Top Head Drive - 0-14,324 Nm (10,564 ft/lbf) in low gear - High Gear 3:1 Ratio - Low Gear 22.5:1 Ratio - Shift between High and Low Gear Ratios - 0-1,500 RPM Speed Range - Splined Floating Spindle - Independent Pressurized Lubrication System - Gearbox oil level inspection windows - Variable Speed Hydraulic Motor - Planetary Gear set for High/Low Ratio Q280K - Top Head Drive - 0-28,000 Nm (20,651 ft/lbf) in low gear - High Gear 3:1 Ratio - Low Gear 22.5:1 Ratio - Shift between High and Low Gear Ratios - 0-1,500 RPM Speed Range - Splined Floating Spindle - Independent Pressurized Lubrication System - Gearbox oil level inspection windows - Variable Speed Hydraulic Motor - Dual Planetary Gear set for High/Low Ratio Rotation Head Gearboxes Location: Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Home Made
LOCATION	Australia	MODEL	Q80K / Q150K / Q280K

Add to Wish List Add to Compare

Rod Clamp (POA) (sale-ehub3573)

For Sale

$0.00

Body Opening: 225 mm (8 3/4" Inch) OD - Fabricated High Tensile Steel Base Frame for increased strength and lighter unit weight - High Tensile Fabricated Lever Arms - Adjustable Connecting with Left & Right Hand Threads allowing accurate adjustment of jaw actuation - Cast Jaw Assemblies to suit most standard drill rod sizes - Light weight casting approx. 16 kg per jaw - Easily replaceable Gripper Inserts for NQ & HQ Jaw Sizes - RC Slips Table, Holders and Inserts to suit 3 1/2", 4" & 4 1/2" Rod Sizes - Changeable with Industry Standard Rod Clamps Rod Clamp Location: Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Home Made
LOCATION	Australia	MODEL	See Description

Add to Wish List Add to Compare

1750 Scout Auger Drill Rig (POA) (sale-ehub3565)

For Sale

$0.00

Model: 1750 Scout Engine: Perkins Diesel Torque: 2,500 Nm at 205 bar and 110 RPM Stroke: 1.75 m Pull-Out / Pull-Down: 1,100 kg Capacity (Guide Only): NQ - 60 m / 4" Inch Open Hole - 30 m / 3 1/2" Inch Auger - 15 m - Custom Toyota 33220 Tray - Direct Dive Auger Head with High Torque Head Motor and Fittings - Fine Feed Control - Auger Drive Sub (1 1/8" Inch Hex) - RHS Mast - Tilt Frame for Vehicle/Trailer Mounting - Hydraulic Tilt - Heavy Duty Pull-Down Chain - Nylon Idler Rollers - Standard Auger Guide - Standard Control Panel - Hydraulic Operation - Rain Hood for Motor & Lockable Cage for Spare Wheel & Motor - Remove Throttle and Stop - Water Filter for Fuel / Water Separation - Light Guard for Augers 500 mm to 1,800 mm - Oil Cooler - Simple Rack for Augers Options for Drill; - Hollow Spindle Head and Tooling for Fluid Drilling - 2 Levelling Jacks for Tray Mount Drills - Tilting Rack for Augers - Alternative Engine Options to suit existing fleet Toyota Landcruiser Upgrade Kit; - Roof Racks for Spare Tyre (31678) - Roof Rack Mounts Pair (31679) - GVM Upgrade Spring Kit @ 4,200 kg (Supply Only - 31680) - Bellows Suspension Kit (Supply Only - 31730) - Storage Box LH Under Deck (33249) - Storage Box RH Under Deck (33248) - Under Deck Water Tanks @ 29 Litres (33137) *Ready for mounting to a Toyota 79 Series Landcruiser Cab Chassis* Drill Rig Location: Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Australia	MODEL	1750

Add to Wish List Add to Compare

12" Inch Hammer & 20" Inch Drill Bit ($25,000 ex GST) (sale-ehub3525)

For Sale

$25,000.00

Hammer Size: 12" Inch Drill Bit Size: 20" Inch - With SD12 Shank (Unused) Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	12" Inch & 20" Inch

Add to Wish List Add to Compare

TL-400 Portable Light Tower ($2,850 ex GST) (sale-ehub3514)

For Sale

$2,850.00

Make / Model: TL-400 Contains: - Tower - Flashlight - Headlight - Charger - Driver - Battery System D24-100 - USD Output, 5V 2A (2 Dock) for charging Headlight, Flashlight or Mobile Phone - 1-3 Battery Pack (1 Battery 30+ Hours extreme mode) - Height: 64.5 cm - 220 cm - Weight: 12.85 kg - One Man Operation - Self locking and 30 degree + up/down adjustable pole - Run Times > 10 hours (High output, 3 batteries) Application - Drilling - Construction - Maintenance - Events - Mining - Emergency - Infrastructure - Personal Control Board - Power Switch - Brightness - DIM+, DIM- - Battery Level - AC Plug - USB Output Light Brightness Area: 1,100 m2 5 m - 490 lux / 10 m - 120 lux / 20 m - 29 lux / 40 m - 7 lux Battery / AC 100-227V - AC 0-15,000 LM - High 8,000 LM - Medium 5,000 LM - Low 2,500 LM - Extreme 800 LM - Rate Power 28 wh - Rate Voltage 24.5 V - Rate Capacity 40 Ah - Working Temp: -10 to 50 degrees - Working Humidity: -20 to 95% Portable Light Tower Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	TL-400

Add to Wish List Add to Compare

2011 Drillex Grout Unit Mounted on 1994 International T2700 8x4 Truck ($115,000 ex GST) (sale-ehub3444)

For Sale

$115,000.00

Truck Make: International Model: T2700 Year: 1994 Engine: Cummins 350 HP KM's: 925,000 Type: 8x4 Grout Unit Make / Model: Drillex Year: 2011 Hours: Less than 5,000 - 800 m Capability - HIAB Crane Fix for Handling 1 Tonne bag of Cement Powder - 4,000 Litre Mixing Tank and Hopper - Large Capacity Mono Pump - 10,000 Litre Flat Bed Water Tank - 8 Tonne Cement Storage - PTO Driven Hydraulics Bulk Handling Self-Contained Grouting Rig Location: Queensland, Australia Learn More

Machine hours	Less than 5,000	KILOMETERS	295,000
YEAR	1994	BRAND	International
LOCATION	Queensland, Australia	MODEL	T2700

Add to Wish List Add to Compare

2004 Cubex QXR 920 Track Mounted Surface Drill Rig ($185,000 ex GST) (sale-ehub3439)

For Sale

$185,000.00

Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn More

Machine hours	16,896	KILOMETERS	N/A
YEAR	2004	BRAND	Cubex
LOCATION	Western Australia	MODEL	QXR 920

Add to Wish List Add to Compare

FMC L1122 Horizontal Triplex Piston Pumps (POA) (sale-ehub3435)

For Sale

$0.00

Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	FMC
LOCATION	New South Wales, Australia	MODEL	L1122

Add to Wish List Add to Compare

2009 Globe Drill KAL 500-CP8 Track Mounted Drill Rig ($650,000 ex GST) (sale-ehub3434)

For Sale

$650,000.00

Make: Globe Drill Model: KAL 500-CP8 Year: 2009 Hours: 27,332 (Lifetime) / Current Hours: 3,406 Engine: Detroit Series 2000 @ 905 HP Engine Hours: 11,982 Onboard Air Capacity: 1,350 CFM / 500 PSI Hole Inclination: 90-50 degrees Rod String: No Rods - Set up for 4 1/2" Inch Rods Depth Capacity On Board: 330 m Overall Width: 3.9 m Compressor Make: Sullair 1,350 CFM 500 PSI Hours: 2,308 Features; - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression - Remote Tramming Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	27,332	KILOMETERS	N/A
YEAR	2009	BRAND	Globe Drill
LOCATION	Western Australia	MODEL	KAL 500-CP8

Add to Wish List Add to Compare

Various Size, Shank, Head & Insert Halco & Karbo Drill Bits (POA) (sale-ehub3430)

For Sale

$0.00

74x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Canada	MODEL	Halco Mach 44/303 & Karbo

Add to Wish List Add to Compare

Search results for: 'mobil axle coffee taxable set for size'

AUSTRALIA WIDE SERVICE

REQUIRE ASSISTANCE - HAVE A QUESTION?

EQUIPMENT FOR HIRE OR FOR SALE