Search results for: 'side high drill bit'

Drill Bits; Model: DHD380 Size: 8" Inch / 9" Inch / 10" Inch - T45 & T51 - 85 mm to 135 mm - Includes some Shank Adaptors and Couplings, etc. Quantity: Approx. 200 Shank Adaptors; Make: Sandvik Model: HL1000T45 / HL1000T51 - Third Shank but size unknown; 3" Inch Blast Hole Bits Hammer Rock Drill Bits Location: Northern Territory, Australia Learn More

Rig Make: Edson Model: CP-Tiga Series Year: 1994 - Repair History since 2021 available - Off Road from November 2022 to October 2025 for repairs (Rear Diff) - Serviced and Ready - Aluminium Traction Tracks/Ramps - Mounted Auger & Drill Bit - Spare Auger Extensions (Plain) - 1x 1.5 Metre Concrete Cutting Drill Bit - 1x 1.0 Metre Concrete Cutting Drill Bit - Rock Drilling Bit - Soil Sampler - Other Spare Parts & Fittings Vehicle Make: Toyota Landcruiser Model: 79 Series Year: 2000 KM's: 443,920 - Spare Tyre - Spare Brake Drums (Need to be machined) Ute Mounted Drill Rig Location: Victoria, Australia Learn More

Hammers; 1x Halco 8" Inch Hammer - Running 8" Inch Bits - 1x Used & 1x New 1x Halco 8" Inch Hammer - With Integral Spiral Stabiliser to give 10" Inch OD - Running 10" Inch Bits with Retention; 2x Used - Good Condition & 1x Brand New Drill Pipe; Length: 4.5" Inch Type: 2 7/8" Inch IF Threads - Most Near New - Done 6x Bores (All less than 100 Metres) - Cleaned & Greased - Fitted with Thread Caps & Plugs Drill Pipe & Hammers Package Location: South Australia Learn More

Rig Make: UDR Model: 1000 Hours: 270 (Since Engine Rebuild) Engine: Detroit GM 6V-71 (Completely Rebuilt) - Head Rebuilt, All New Selectors, Gear Train, Bearings and Upgraded to Splined Output Spindle and Shaft (17 Hours used since) - Genuine Sandvik Parts Used - Hydraulic Motor tested (when apart and in good condition) - No Cylinder leaks - Lots of Hoses replaced - Slight leak from Control Panel - Good gauges and spool valves - Hydraulic Tank repaired, cleaned, and new filters and new oil (12 hours ago) - Bean Pump has new fluid end and in good condition - Table Modified to accept 400 mm Casing and running 300 mm Square Slips Plate - Original UDR Table available - Rod Safety Cage Included Truck Make: International Model: Acco T2650 Engine: Cummins 350 Big Cam Transmission: 18 Speed Road Ranger Type: 8x4 - No Oil Leaks - Lots spent for Rego - Cab has minimal rust - Tyres New 3 years ago and done 7,000 km's since Truck Mounted Drill Rig Location: South Australia Learn More

Make: UDR Model: 300 Year: 2007 Drill Rig Location: Western Australia Learn More

Model: DAC150 Year: 2022 Hours: 1,211 Engine: Caterpillar CAT 3406 Track Base: Morooka 2500 (Stripped & Rebuilt - Subframe and Chassis extended and Track Frame moved central to machine) - Tilt/Dump Rod Bin (Holds 40x 3 Metre Rods - 120 Metres) - Sullair 1150/350 Air Compressor - Airdrill Rotation Head - Bottom Mount Air Swivel - Automatic Blow Down - Sand Cyclone with Revolving Splitter - RC Cyclone with Cone Splitter - Hydraulic Fold Down Walkway with Pull Out Ladder - Pedal Operated Air Spanner - Hydraulic Breakouts Track Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Mobile Drill Model: B37 Year: 2012 Refurbished Year: 2025 (Comprehensively Rebuilt & Upgraded) Hours: 1,830 Engine: John Deere 4045TF285 Diesel Engine @ 99 HP Feed Stroke: 4 Metres with 15,700 lb Retract Force Rod Pull: 6 Metres Haul/Wireline/Jib Winch: 8,500 lb Front Mounted Recovery Winch: 20,000 lb Track Base: Remote Controlled MT-20 with Engineered FOPS for operator safety Rebuild & Upgrade; - Traverse Assembly & Traverse Box replaced and upgraded - New Toa-Tone SP8000 Sonic Drill Head (Oscillation Head) - New Hydrovane Compressor - New Tracks for improved mobility and stability - Upgraded Spindle Attachment - Full Service Completed with regular servicing history maintained Includes; - Dump Mast - Triple Clamp with Make & Break - Auto SPT Hammer - Bean W1122D Pump - Caterpillar CAT 430 Injection Pump - 10 Speed Mobile Drill Head - 30 Metres Sonic Tooling (140 mm Casing / 115 m Barrel) - Spares + Consumables - Upgraded Sonic Tooling to Boart Longyear standard Track Mounted Sonic + Conventional Drill Rig Location: Queensland, Australia Learn More

Model: HD-500 Engine: Detroit 8V-92TA / 450HP @ 2,100 RPM Flow Rate: Up to 7.5 BPM / 315 GPM / 1,200 LPM High Pressure: Up to 13,500 PSI Dimensions; Length: 6,058 mm Width: 2,438 mm Height: 2,591 mm Weights; Unit Weight: 11,000 kg Frame Max: 15,000 kg Stacking Mass: 194,000 kg Skid Mounted Triplex Pump Unit Location: United Arab Emirates Learn More

Make: Hydco Model: 8V92 Year: 2021 Hours: 7,370 - New Air Side at 500 hours - Pistons, Rings, Barrels, etc. all out of Hydco - New Blower fitted in December with 60 hours - New Fuel Rack and Tune Up completed - Spare PRV's 1,800 CFM 900 PSI Skid Mounted Booster Location: Northern Territory, Australia Learn More

Make: EDM Model: 1500 Hours: 4,161 Engine: 2x Cummins 4BTA 3.9 Engine Hours: 200 Capacity: NQ up to 1,500 metres deep - Rod Spinner with Hydraulic Cut-Out for Enhanced Safety - Wireline Spooler - Main and Wireline Winch overrides to prevent accidental pull-throughs Heli-Portable Diamond Drill Rig Location: Indonesia Learn More

Type: NQ Quantity: 792 Metres Length: 6 Metres - 50% Life Left Drill Pipe / Rods Location: Northern Territory, Australia Learn More

Drill Rig Make: Schramm Model: T130 Year: 2006 Hours: 13,878 - Refurbished Rod Presenter Make: OXT Engineering Model: PJA180 Year: 2016 - Trailer Location: Western Australia Learn More

Rig Make: Hydco Model: 70 Hours: 10,723 - Onboard Air Compressor - Rod Handler Truck Make: International Model: T-Line Year: 1985 KM's: 31,721 GVM: 26,500 kg Truck Mounted Drill Rig Location: Western Australia Learn More

Make: TMA Model: TN09 Engine: Two Cylinder Kohler Diesel - Light Hydraulic - Tight Access - Augers - Air/Mud Swivel - Drill Rods - Winch - Mast Extension and Bits Mini Geotechnical Auger Kanga Style Drill Rig Location: Queensland, Australia Learn More

Make: Caterpillar Model: 773G Year: 2014 Hours: 23,585 Idle Hours: 13,606 - New Tank - 3x Adjustable Rear Spray Heads - 2x Side Spray Heads - Hose Reel - Water Cannon - Top Fill Water Truck Location: United States of America Learn More

Make: Custom Made Model: GT500 Year: 1997 Dimensions; Length: 2 Metres Width: 1.5 Metres Height: 1.2 Metres Weight: 680 kg each Bowl Capacity: 500 Litres each - Mazda Power Packs or larger most suitable for these mixers - Last Used approx. 2014 - Controlled Independently - Specifically designed to mix large volumes of High Early Strength Non-Shrink Grouts very quickly - Cycle times were designed to be less than eight minutes and continuously - Indeed full truckloads of fast setting grouts were mixed and placed using these machines in less than a shift - Mixers were commonly mounted and used from the back of our truck - There are two mixers; a left hand and a right hand - When used together the controls were in the centre between the mixers - When configured like this one operator would control both machines - One machine would be dumping while the other one was mixing - Output was continuous and in less than eight minutes per batch - Mixed grout was dumped into a hopper and taken to the site needed - Forklift Channels (Center Balanced) - Machine has mixed; Proprietary Cement Grouts, Non-Shrink Grouts, Small Aggregate Concrete, etc. - Hydraulic Driven Skid Mounted Grout Mixers & Hoppers Location: Queensland, Australia Learn More

Make: Everdigm Model: Rocky B180 Bit Shank: N180 Shank Connection: API 8-5/8" Inch Reg. Pin Piston Stroke: 5.75" Inch Cylinder Bore: 12.28" Inch Hole Sizes: 18" Inch ~ 26" Inch Wrench Size: A/F 14" Inch - Brand New - Bailing Subs/Break Out Plate, etc. - Hammer forklift cradle included - 19” Hammer bit included (unused) RS Hammer Location: Queensland, Australia Learn More

Drill Rig Make: Boart Longyear Model: LF160C Year: 2020 Installed Power: 194 kW Working Pressure: 380 bar Head Torque: 665 I / 90 II daNm Head Rotation: 250 I / 1,050 II RPM Feed Force: 7,000 daN Retract Force: 17,000 daN Feed Length: 7,200 mm Tracks Make: Strickland Track Mounted Drill Rig Location: Queensland, Australia Learn More

Drill Rig Make: Boart Longyear Model: LF160C Year: 2022 Installed Power: 194 kW Working Pressure: 380 bar Head Torque: 665 I / 90 II daNm Head Rotation: 250 I / 1,050 II RPM Feed Force: 7,000 daN Retract Force: 17,000 daN Feed Length: 7,200 mm Tracks Make: Strickland Model: 6000428 Year: 2022 Track Mounted Drill Rig Location: Queensland, Australia Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - Warman Clamps - Under Casing Clamps - Wireline and Main Winch - Rod Bin - Auger Carrying Rack at Front of Rig - Auto SPT - Silvan Pump - All New Suction and Hydraulic Hoses for Pump with Camlocks - 2x Mud Tanks (1,000 L & 500 L - Plastic) Down Hole Gear - 10x 3m PQ Rods Plus Shorts - 10x 3m HQ Rods Plus Shorts - 10x 3m NQ Rods Plus Shorts - 10x 3m Junior Mayhew Rods with Spanner Flats Plus 2x 1.5 m - 5x 100mm x 1.5m Augers Plus Bit & 20 Pins - 2x 1.5 NMLC Core Barrels - 6x NMLC Core Bits - 4x Impreg & 2x Surface Set - 40x Core Lifters / 6x Cases / 40x Stop Rings - 2x NMLC Reamers - 2x BQ Reamers - 3x BQ Core Bits - 2x 1.5m NQ3 Core Barrels - 2x Sets of Splits - 1x 3m NQ3 Core Barrel - 2x Locking Couplings - 2x Adaptor Couplings - Box of Barrel Spares - 1x HQ/NQ Overshot - 1x Set of PQ, HQ, NQ Inner Tube Wrenches - 10x 75mm Shelby Tubes Plus Drive Head - 10x 50mm Shelby Tubes Plus Drive Head - 2x SPT Samplers - 2x Pulling Plugs - 1x Spare Water Swivel Plus 2x Repair Kits - 1x Repair Kit for Rig Swivel - Many Subs to Facilitate all the Drilling Requirements - Stillsons - 2x 36" Inch, 2x 24" Inch & 2x 18" Inch - 1x Gas Mig Welder - 1x Honda 3.5 kVA Powered Generator - 1x PQ Birds Mouth for Water Return to Mud Tanks - 1x HQ Birds Mouth for Water Return to Mud Tanks - New Suction and Delivery Hoses - 1x 100mm Down Hole Hammer with 2x Bits 118mm *New* - 1x 75mm Down Hole Hammer with 2x Bits 95mm *New* Support Truck Make: Mitsubishi Model: Canter Year: 2009 Type: 4x4 - Hydraulic Hi-Ab Crane - 500 Litre Water Tank - 400 Litre Diesel Tank for Rig & 12 Volt Pump - 1x kVA Inverter - Wired so diesel pump won't engage until the switch is turned on in the locked tool box. - 1x Centrifugal Pump 1 1/2" Inch plus Suction and Delivery Hoses with Camlocks - 2x Tool Boxes - 1x Box of Hand Spanners & Sockets - Fitted Drill Rod Bins & Core Barrel Bins - Currently Registered until May 2025 Tracked Mounted Drill Rig Support Truck + Down Hole Gear Package Location: New South Wales, Australia Learn More