Search results for: 'size bài ct14 core swing box ct14 cfm'

Bit 1 Size: 9" Inch - 380 IR Shank - Welded Legs Condition: Used Price: $880 ex GST Bit 2 Size: 9" Inch - 380 IR Shank Condition: Never Used Price: $1,100 ex GST Bit 3 & 4 Size: 9" Inch - 380 IR Shank Quantity: 2 Condition: Good Price: $1,100 ex GST each Hammer Drill Bit Location: Western Australia Learn More

Size: 7" Inch - PDC Condition: Used Drill Bit Location: Western Australia Learn More

Size: 12 1/4" Inch - TCI - Sealed Bearing Condition: Used Rock Roller Bit Location: Western Australia Learn More

Size: 12 1/4" Inch - Milled Teeth - Sealed Bearing Condition: Good Rock Roller Bit Location: Western Australia Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - 1x Set of NQ Jaws *New* - 1x Set of HQ Jaws *New* - Cameron Water Gauge *New* - Wrap Around Mast - SPT Hammer Included - Rod Racks - Suction Hose and 2x Double Braid 1" Inch Duffield Bypass Hoses - 5x 100 mm Augers and 1x Bit Plus Drive Sub - 1 1/2" Inch Centrifugal Pump and Hoses - Plus Camlocks *All New* - 36" Inch & 24" Inch Stilsons - Chain Wrench - 1.5 Metre NMLC Core Barrel Plus 5x 3 Metre NQ Rods - 2x Mud Tanks - 7x5' Foot Box Trailer Tracked Mounted Drill Rig Location: New South Wales, Australia Learn More

Rig Make: UDR Model: 650 Hours: 9,202 - Commissioned Mid 2023 - Onboard PTO Driven Air Compressor - New water pump - New fan belts - New radiator core - Recent service with oil & new filters - New rod & piston seals to main feed Ram - New Dump Mast Ram - New rods & seals to mast raise rams - New side shift ram - New break out ram - New rod crane raise ram - New hydraulic valve blocks in control cabinet for main pump & secondary pump controls - New micro control fine feed controller - Replaced majority of gauges with new - New main rotation shaft seals & speedy sleeves - New main rotation torque control cartridge - New hammer oiler pump - New seats & O rings in majority of valve banks Air Compressor - New Air / Oil separator filter - New Oil stop valve - New Castrol Aircoil 68 synthetic oil - New filters - Recently been serviced by Midcoast Compressors Truck Make: MAN Year: 1997 KM's: 200,000 Type: 8x8 Transmission: Recon 18 Speed Gear Box - Kevrek 1500 Hiab Crane with Winch & Umbilical Cord Remote - Radiator back flushed - New Water Pump - New Fan Belts - New brake boosters on every wheel - New four way valve - New valve on brake pedal - Rebuilt Truck Compressor - New air on drivers seat - New air valves on diff locks / cross locks - New clutch, fly wheel & pressure plate - New bearings & seals in Dana drive box - New oil pump on Dana drive box - New universals on tail shafts - New ram on power steering - New tyres all around - All ball joints on truck replaced that were needed, or new rubbers on them - Recently passed Pit Inspection - 7 months Rego as Plant - No need for overhang permits; within length Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Mercedes Benz Model: Unimog Year: 1988 - Ex Military - Onboard Sullair 900 CFM / 350 PSI Air Compressor with Caterpillar CAT C12 Engine - Has had about $20 k spent on recently - Unregistered Truck Location: Queensland, Australia Learn More

Make / Model: CE100 Year: 2013 (Rebuilt completed in 2022) Hours: 551 - Fully Re-Engineered - NDT Testing Completed - CT14 Hydraulic Operating System - NQ, HQ, PQ Drilling Capabilities - Up to date Safety Stop Systems - Engineered and compliant hand rail and walkway system and access ladders - Full lighting for N/S operations - Certified FOPS on driller platform - Running new Danfos Primary Hydraulic Pump at >3500 PSI direct from John Deere 127 HP - 165 HP engine - 5.7 Tonne Main Winch with certified 16mm Winch Rope - A new AMC Main Water Pump <1000 PSI with a PRV Valve Set @750 PSI - New Stryker 45ltr Certified Fire Suppression system installed - A UDR Rod Spinner has been engineered into mast structure for hands free operation of tripping rods - A hydraulic operated Breakout Spanner allows for breakout of rod joins or subs - Tungsten inserts interchangeable on Breakout Spanner - UDR Foot Clamp assembly added for ease of maintenance and clamping of rod string Diamond Core Track Mounted Drill Rig Location: Western Australia Learn More

Model: 150N Engine: John Deere / FPT Iveco / Kirloskar / Deutz Pull Up Force: 5,000 kg Pull Down Force: 3,750 kg Tool Winch Hoisting Capacity: 2,500 kg (Bare Drum) Wireline Winch Hoisting Capacity: 500 kg (Bare Drum) Diamond Core Drilling Capacity; NQ Size: 150 m HQ Size: 90 m PQ Size: 60 m Water Pump; Max Flow: 120 LPM Max Pressure: 30 bar Type: Triplex Piston Pump Track Mounted Multi Purpose Drill Rig Location: United Arab Emirates Learn More

Model: 75N Engine: Kirloskar / Deutz / John Deere Pull Up Force: 2,500 kg Pull Down Force: 2,500 kg Tool Winch Hoisting Capacity: 1,500 kg Diamond Core Drilling Capacity; NQ Size: 75 m HQ Size: 45 m PQ Size: 30 m Mud Rotary; 30 m @ 150 mm Diameter Auger Drilling; 20 m @ 150 mm Diameter 4 m @ 300 mm Diameter Water Pump; Max Flow: 85 LPM / 140 LPM Max Pressure: 30 bar / 18 bar Type: Triplex Piston Pump / Progressive Cavity Pump Compact Geotechnical Drill Rig Location: United Arab Emirates Learn More

Model: 1000N Engine: John Deere FPT Kirloskar 4 Cylinder Turbo Charged @ 160 HP Pull Down Force: 8,000 kg Retract Force: 12,000 kg Max Torque: 5,000 Nm Max Rotary Speed: 1,250 RPM - CCTV Camera System - Tools Box - Safety Cage Diamond Core Drilling Capacity; N Wireline: 1,000 m H Wireline: 600 m P Wireline: 400 m Mud Pump; Max Flow: 140 LPM Max Pressure: 50 bar Triplex Piston Pump Track Mounted Drill Rig Location: United Arab Emirates Learn More

Model: 600N Engine: John Deere FPT Kirloskar 4 Cylinder Turbo Charged @ 160 HP Pull Down Force: 5,000 kg Retract Force: 7,000 kg Max Torque: 5,000 Nm Max Rotary Speed: 1,250 RPM Main Winch Capacity: 5,000 kg - CCTV Camera System - Safety Cage - Tools Box Diamond Core Drilling Capacity; N Wireline: 600 m H Wireline: 400 m P Wireline: 250 m Mud Pump; Max Flow: 140 LPM Max Pressure: 50 bar Triplex Piston Pump Track Mounted Drill Rig Location: United Arab Emirates Learn More

- Completely Refurbished - Engine side has 3 Ringed Pistons instead of the normal 2 Rings 1,300 CFM 750 PSI Skid Mounted Booster Location: Victoria, Australia Learn More

Hours: 2,032 - Fully Serviced - Injector Pump Fully Overhauled - Needs New Compressor Valves 1,800 CFM 900 PSI Skid Mounted Booster Location: Victoria, Australia Learn More

Make: Ingersoll Rand Model: 1,200 CFM / 300 PSI Year: 2017 Air Compressor Location: Western Australia Learn More

Make: Mole Pioneer Model: P400S 450HQ Hours: 2,940 Engine: Perkins 119 kW Diesel - Onboard W1122 Bean Pump Rotation Head Model: KL400 Top Drive Stroke: 1,200 mm Drilling Angle: 90 degrees vertical to 45 degrees horizontal Drilling Depth Capacity B Size: 900 metres N Size: 700 metres H Size: 450 metres P Size: 275 metres Truck Make: Ford Model: Cargo Series KM's: 25,372 Year: 1985 Type: 6x4 Condition: Good *For more information, please contact us* Mole Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Caterpillar Model: MD6240 Year: 2012 Hours: 30,000 Engine Number: QST30-327139640 Serial Number: 2U65X75 Onboard Air Compressor: Sullair 1,500 CFM / 350 PSI - New GPS Fitted and included in price Track Mounted Drill Rig Location: Western Australia Learn More

Drill Rig Make: Chicago Pneumatic Model: CP650 Year: 1981 Engine: Caterpillar CAT 3406 Onboard Air Compressor: GHH 825 CFM / 350 PSI Twin Screw Injection Pump: Comet APS 71 ltr/min @ 580 PSI Casing Driver: 612 Banger 6" Inch - 12" Inch Winch: 1/2" Inch 7,000 lbs Extendable Rod Handling Jib Hole Capacity: 6" Inch - 12" Inch 500 m 4 1/2" Inch Rods Capacity; Pull Down: 21,000 lbs Pull Back: 55,000 lbs 5 1/2" Inch Heavy Hoist Rams 73 ft/min Rapid Feed - 160 Pitch Chains Levelling Jacks; Front: 1 x 5" Inch x 48" Inch Stroke Rear: 2 x 5" Inch x 36" Inch Stroke Top Drive Rotary; 0-152 RPM - 76,000 lb Torque Twin Dynex Motors R/C Head - 7 m Travel Carrier Type: 6x4 Engine: Caterpillar CAT 3208 @ 210 HP Crane Carrier Carrier Mounted Water Well Drill Rig Location: New Zealand Learn More

Body Opening: 225 mm (8 3/4" Inch) OD - Fabricated High Tensile Steel Base Frame for increased strength and lighter unit weight - High Tensile Fabricated Lever Arms - Adjustable Connecting with Left & Right Hand Threads allowing accurate adjustment of jaw actuation - Cast Jaw Assemblies to suit most standard drill rod sizes - Light weight casting approx. 16 kg per jaw - Easily replaceable Gripper Inserts for NQ & HQ Jaw Sizes - RC Slips Table, Holders and Inserts to suit 3 1/2", 4" & 4 1/2" Rod Sizes - Changeable with Industry Standard Rod Clamps Rod Clamp Location: Australia Learn More

Model: FH3000 Engine: Cummins QSL Electronic @ 255 kW (342 HP) Pull Back: 280 kN (62,900 lbf) Limited Speed 244.8 kN (55,033 lbf) Full Speed Pull Down: 115 kN (25,853 lbf) Water Pump Options; - Standard FMC W1122BCD 140 lpm @ 1,000 psi - FMC L11-18SC 265 lpm @ 1,800 psi Depth Capacity; NQ Core: 2,030 m HQ Core: 1,377 m Open Hole 3 1/2" Inch Rods: 900 m RC 4 1/2" Inch: 600 m (Nominal) Traverse Speed; Maximum Speed: 55.5 m/min (182 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 14,324 Nm (10,564 ft/lb) in low gear - 0-1,500 RPM Speed Range - 100% Theoretical Main Winch; - Maximum Pull: 226 kN (50,806 lbf) - Maximum Speed: 100 m/min (328 ft/min) - 2x Multi Disc Brake Units - Fail Safe Spring Activated - Hydraulic Pressure Release - 9 Metre Rod Pull Capacity Wireline Winch; - Maximum Pull: 27 kN (6,069 lbf) - Rope Capacity: 3,000 Metres x 8 mm Rope - Maximum Speed: 450 m/min (1,476 ft/min) New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More