Search results for: 'size hose drill bit'
- Did you mean
- size hire drill bit
- sale hose drill bit
- Related search terms
- HOSE FOR SALE IN DEL RAY BEACH
- hose to enabl 100 hz and adaptive sync
- hose for sale in carry hire nj
- hose to enabl 100 hz and adaptive spec
- hose to enabl 110 hz and adaptive sinc
-
3x Epiroc 9 7/8" Inch DIA on 6 5/8" Inch Reg Pin & 3x Atlas Copco 10 5/8" Inch DIA on 6 5/8" Inch Reg Pin Drill Bits + 2x Buckets of Replacement Teeth (POA) (sale-ehub4264)For Sale$0.00Make: Epiroc Model: 9 7/8" Inch DIA - On 6 5/8" Inch Reg Pin Quantity: 3 Make: Atlas Copco Model: 10 5/8" Inch DIA - On 6 5/8" Inch Reg Pin Quantity: 3 Replacement Teeth - 2x Buckets @ 75 pieces each Drill Bits Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL See Description
-
DE881 Drill Rig (POA) (sale-ehub4263)For Sale$0.00Make/Model: DE881 Engine: Cummins QSL9 Inline 6 Cylinder Tier 3 Depth Capacity (Coring): 2,223 m (7,291 ft) N Size Depth Capacity (Reverse Circulation): 450 m (1,470 ft) in Size Feed Force: 11.4 Tonne (25,350 lbf) Pull Force: 23 Tonne (50,700 lbf) Feed Length (Stroke): 7.32 m Speed Up: 65.4 m/min Speed Down: 49 m/min Features; - DA555 Diamond/RC Rod Handler - Hands Free Breakout Tool - FOPS Fitted over the Control Panel - Jaws for N, H & P Size Rod Handler and Rod Clamps - Starter Rods included for N, H & P Sizes - Rotating Rod Guard with Interlock - Front Mount Diesel Engine - Sophisticated Microfeed System - Water/Mud Pump - Water Swivel - Acoustic Enclosure on Engine - Powerful Top Drive Rotation Unit - Self-Energizing Rod Clamp - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Auxiliary Hydraulic Outlets - Multiple Guarding - Onboard Rod Storage - Remote Wedge Interlock Kit - Deck Mounted Wireline Winch - Wireline Counter / Cleaner / Overrun Cut Out - Left-Hand Hydraulic Operated Walkway with Stairs - Fluid Catch Tray (Under Engine) - High Pressure Filter Kit - Hose Sleeving on High Risk Hoses - Airline Oiler + Options Drill Rig Location: TBA (New Build - Built to Order) Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION TBA
MODEL DE881
-
DE712 Track Mounted Drill Rig (POA) (sale-ehub4262)For Sale$0.00Make/Model: DE712 Depth Capacity: 1,126 m (3,693 ft) N Size Feed Force: 5.5 Tonne (12,000 lbf) Pull Force: 9.3 Tonne (20,500 lbf) Feed Length (Stroke): 3.45 m Speed (Up & Down): 30m/min Features; - Radio Remote Tramming with No Driver Compartment - FOPS Fitted over Control Panel - Rotating Rod Guard with Interlock - "P" Size Rotation Unit with Chuck Drive and Hollow Spindle - Stepless Rotation Speed Control - Pilot Hydraulic Controls - Self-Propelled Drill Unit - 1x Rod Clamp to support B, N, H, P & S Rod Sizes; 44.5 to 177.8 mm - Fits in a high cube 40' Foot closed Shipping Container - Hydraulically Operated Left-Hand and Right-Hand Walkways - Tier 3 or Stage 5 / Tier 4 Diesel Engine Models Available - Wireline Spooler - Fire Suppression System - Main Winch Travel Limiter - Safety Spin capable of making up and breaking out of Rod Joints during tripping operations + Options Track Mounted Drill Rig Location: TBA (New Build - Built to Order) Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION TBA
MODEL DE712
-
2023 Black Diamond HJGW400 Track Mounted Geothermal Drill Rig (FOR HIRE/RENT - POA) (hire-ehub4258)For HireMake: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn MoreMachine hours 260
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL Black Diamond HJGW400
-
2023 Black Diamond HJGW400 Track Mounted Geothermal Drill Rig ($145,000 ex GST) (sale-ehub4258)For Sale$145,000.00Make: Black Diamond Model: HJGW400 Year: 2023 Hours: 260 Engine: Cummins 4BTA Bean Pump: AD413, Max PSI: 550, Max RPM: 500, KW: 2.4, KPA: 3,792, HP: 3.2, GPM: 9, LPM: 34 Rod Bin: 80 m Mayhew Jr 3M Rods (Near New) Capability: 200M with 6” Hammer Hole Diameter: 110 - 305 mm Max Drilling Depth: 400 m Rotation Torque: 3,500 Nm Rotation Speed: 0-200 RPM Feeding Capacity: 100 Kn Feed Stroke: 200 Kn Drill Rod Length: 6 m Travel Speed: 2.5 km/h Dimensions (L x W x H - Transportation): 6,700 mm x 1,800 mm x 2,650 mm Dimensions (Working): 4,350 mm x 2,850 mm x 7,320 mm Weight: 9.5 Tonne Track Mounted Geothermal Drill Rig Location: Queensland, Australia Learn MoreMachine hours 260
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL Black Diamond HJGW400
-
2024 MPI NF500 Triplex Hydraulic Jack Up Mud Pump ($1,392,000 ex GST) (sale-ehub4256)For Sale$1,392,000.00Make: MPI Model: NF500 Year: 2024 Hours: 11 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn MoreMachine hours 11
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL MPI NF500
-
2024 MPI NF500 Triplex Hydraulic Jack Up Mud Pump ($1,392,000 ex GST) (sale-ehub4255)For Sale$1,392,000.00Make: MPI Model: NF500 Year: 2024 Hours: 26 - Triplex - Oversize transmission cooler fitted to radiator support - All high pressure piping, Cameron Gauges, PRV’s, etc. have test certificates - Pulsation Dampener has design registration certificates - Transmission has lock indicators visible to the operator - Transmission has over temp alarms and lights, and “quick to neutral” to further protect the transmission - Dual post battery isolators and starter isolators - Test certificates and register for the hydraulic hosing for the self- loading legs Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn MoreMachine hours 26
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL MPI NF500
-
DHD380 / T45 / T51 Hammer Rock Drill Bits (POA) (sale-ehub4248)For Sale$0.00Drill Bits; Model: DHD380 Size: 8" Inch / 9" Inch / 10" Inch - T45 & T51 - 85 mm to 135 mm - Includes some Shank Adaptors and Couplings, etc. Quantity: Approx. 200 Shank Adaptors; Make: Sandvik Model: HL1000T45 / HL1000T51 - Third Shank but size unknown; 3" Inch Blast Hole Bits Hammer Rock Drill Bits Location: Northern Territory, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory, Australia
MODEL DHD380
-
1994 Edson CP-Tiga Series Drill Rig Mounted on 2000 Toyota Landcruiser 79 Series Ute ($55,000 ex GST) (sale-ehub4246)For Sale$55,000.00Rig Make: Edson Model: CP-Tiga Series Year: 1994 - Repair History since 2021 available - Off Road from November 2022 to October 2025 for repairs (Rear Diff) - Serviced and Ready - Aluminium Traction Tracks/Ramps - Mounted Auger & Drill Bit - Spare Auger Extensions (Plain) - 1x 1.5 Metre Concrete Cutting Drill Bit - 1x 1.0 Metre Concrete Cutting Drill Bit - Rock Drilling Bit - Soil Sampler - Other Spare Parts & Fittings Vehicle Make: Toyota Landcruiser Model: 79 Series Year: 2000 KM's: 443,920 - Spare Tyre - Spare Brake Drums (Need to be machined) Ute Mounted Drill Rig Location: Victoria, Australia Learn MoreMachine hours N/A KILOMETERS 443,920
YEAR 1994
BRAND Edson
LOCATION Victoria, Australia
MODEL CP-Tiga Series
-
45x 4.5" Inch 2 7/8" Inch IF Thread Drill Pipe & Hammer Package ($60,500 ex GST) (sale-ehub4245)For Sale$60,500.00Hammers; 1x Halco 8" Inch Hammer - Running 8" Inch Bits - 1x Used & 1x New 1x Halco 8" Inch Hammer - With Integral Spiral Stabiliser to give 10" Inch OD - Running 10" Inch Bits with Retention; 2x Used - Good Condition & 1x Brand New Drill Pipe; Length: 4.5" Inch Type: 2 7/8" Inch IF Threads - Most Near New - Done 6x Bores (All less than 100 Metres) - Cleaned & Greased - Fitted with Thread Caps & Plugs Drill Pipe & Hammers Package Location: South Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION South Australia
MODEL See Description
-
UDR1000 Drill Rig Mounted on International Acco T2650 8x4 Truck ($313,500 ex GST) (sale-ehub4242)For Sale$313,500.00Rig Make: UDR Model: 1000 Hours: 270 (Since Engine Rebuild) Engine: Detroit GM 6V-71 (Completely Rebuilt) - Head Rebuilt, All New Selectors, Gear Train, Bearings and Upgraded to Splined Output Spindle and Shaft (17 Hours used since) - Genuine Sandvik Parts Used - Hydraulic Motor tested (when apart and in good condition) - No Cylinder leaks - Lots of Hoses replaced - Slight leak from Control Panel - Good gauges and spool valves - Hydraulic Tank repaired, cleaned, and new filters and new oil (12 hours ago) - Bean Pump has new fluid end and in good condition - Table Modified to accept 400 mm Casing and running 300 mm Square Slips Plate - Original UDR Table available - Rod Safety Cage Included Truck Make: International Model: Acco T2650 Engine: Cummins 350 Big Cam Transmission: 18 Speed Road Ranger Type: 8x4 - No Oil Leaks - Lots spent for Rego - Cab has minimal rust - Tyres New 3 years ago and done 7,000 km's since Truck Mounted Drill Rig Location: South Australia Learn MoreMachine hours 270 (Since Rebuild)
KILOMETERS N/A YEAR N/A BRAND UDR
LOCATION South Australia
MODEL 1000
-
2007 UDR300 Drill Rig (Open to Offers) (sale-ehub4232)For Sale$0.00Make: UDR Model: 300 Year: 2007 Drill Rig Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2007
BRAND UDR
LOCATION Western Australia
MODEL 300
-
2022 DAC150 Track Mounted Drill Rig ($845,000 ex GST) (sale-ehub4224)For Sale$845,000.00Model: DAC150 Year: 2022 Hours: 1,211 Engine: Caterpillar CAT 3406 Track Base: Morooka 2500 (Stripped & Rebuilt - Subframe and Chassis extended and Track Frame moved central to machine) - Tilt/Dump Rod Bin (Holds 40x 3 Metre Rods - 120 Metres) - Sullair 1150/350 Air Compressor - Airdrill Rotation Head - Bottom Mount Air Swivel - Automatic Blow Down - Sand Cyclone with Revolving Splitter - RC Cyclone with Cone Splitter - Hydraulic Fold Down Walkway with Pull Out Ladder - Pedal Operated Air Spanner - Hydraulic Breakouts Track Mounted Drill Rig Location: New South Wales, Australia Learn MoreMachine hours 1,211
KILOMETERS N/A YEAR N/A BRAND Home Made
LOCATION New South Wales, Australia
MODEL DAC150
-
2012 Refurbished Mobile Drill B37 Sonic + Conventional Track Mounted Drill Rig ($419,000 ex GST) (sale-ehub4223)For Sale$419,000.00Make: Mobile Drill Model: B37 Year: 2012 Refurbished Year: 2025 (Comprehensively Rebuilt & Upgraded) Hours: 1,830 Engine: John Deere 4045TF285 Diesel Engine @ 99 HP Feed Stroke: 4 Metres with 15,700 lb Retract Force Rod Pull: 6 Metres Haul/Wireline/Jib Winch: 8,500 lb Front Mounted Recovery Winch: 20,000 lb Track Base: Remote Controlled MT-20 with Engineered FOPS for operator safety Rebuild & Upgrade; - Traverse Assembly & Traverse Box replaced and upgraded - New Toa-Tone SP8000 Sonic Drill Head (Oscillation Head) - New Hydrovane Compressor - New Tracks for improved mobility and stability - Upgraded Spindle Attachment - Full Service Completed with regular servicing history maintained Includes; - Dump Mast - Triple Clamp with Make & Break - Auto SPT Hammer - Bean W1122D Pump - Caterpillar CAT 430 Injection Pump - 10 Speed Mobile Drill Head - 30 Metres Sonic Tooling (140 mm Casing / 115 m Barrel) - Spares + Consumables - Upgraded Sonic Tooling to Boart Longyear standard Track Mounted Sonic + Conventional Drill Rig Location: Queensland, Australia Learn MoreMachine hours 1,830
KILOMETERS N/A YEAR 2012
BRAND Mobile Drill
LOCATION Queensland, Australia
MODEL B37
-
Exploration Drill Masters EDM1500HP Heli-Portable Diamond Drill Rig (POA) (sale-ehub4207)For Sale$0.00Make: EDM Model: 1500 Hours: 4,161 Engine: 2x Cummins 4BTA 3.9 Engine Hours: 200 Capacity: NQ up to 1,500 metres deep - Rod Spinner with Hydraulic Cut-Out for Enhanced Safety - Wireline Spooler - Main and Wireline Winch overrides to prevent accidental pull-throughs Heli-Portable Diamond Drill Rig Location: Indonesia Learn MoreMachine hours 4,161
KILOMETERS N/A YEAR N/A BRAND EDM
LOCATION Indonesia
MODEL 1500
-
2020 Caterpillar CAT 390FL Track Mounted Excavator (POA) (sale-ehub4203)For Sale$0.00Make: Caterpillar Model: 390FL Year: 2020 Hours: 19,391 - Auxiliary Hydraulics (Never Used - Hoses were removed) - 2x Buckets in Good Condition; 1x with almost no use - No EPA Track Mounted Excavator Location: South America Learn MoreMachine hours 19,391
KILOMETERS N/A YEAR 2020
BRAND Caterpillar
LOCATION South America
MODEL 390FL
-
792 Metres of 6 Metre NQ Drill Pipe / Rods (Open to Offers) (sale-ehub4195)For Sale$0.00Type: NQ Quantity: 792 Metres Length: 6 Metres - 50% Life Left Drill Pipe / Rods Location: Northern Territory, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory, Australia
MODEL NQ
-
2006 Schramm T130 Drill Rig & 2016 OXT Engineering PJA180 Rod Presenter Trailer (POA) (sale-ehub4193)For Sale$0.00Drill Rig Make: Schramm Model: T130 Year: 2006 Hours: 13,878 - Refurbished Rod Presenter Make: OXT Engineering Model: PJA180 Year: 2016 - Trailer Location: Western Australia Learn MoreMachine hours 13,878
KILOMETERS N/A YEAR 2006
BRAND Schramm
LOCATION Western Australia
MODEL T130
-
Hydco 70 Drill Rig Mounted on 1985 International T-Line Truck ($350,000 ex GST) (sale-ehub4191)For Sale$350,000.00Rig Make: Hydco Model: 70 Hours: 10,723 - Onboard Air Compressor - Rod Handler Truck Make: International Model: T-Line Year: 1985 KM's: 31,721 GVM: 26,500 kg Truck Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 10,723
KILOMETERS 31,721
YEAR 1985
BRAND Hydco
LOCATION Western Australia
MODEL 70
-
TMA TN09 Mini Geotechnical Auger Kanga Style Drill Rig ($35,000 ex GST) (sale-ehub4178)For Sale$35,000.00Make: TMA Model: TN09 Engine: Two Cylinder Kohler Diesel - Light Hydraulic - Tight Access - Augers - Air/Mud Swivel - Drill Rods - Winch - Mast Extension and Bits Mini Geotechnical Auger Kanga Style Drill Rig Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL TMA TN09
Filter