Search results for: 'wheel to loader for rang for spare'
- Related search terms
- wheel to look for rent for sale
- wheel to load for rent for sale
- wheel to lock for rent for sale
- wheel to loader for rent for sale
- wheel to loop for rent for sale
-
2003 SD 100 Track Mounted Drill Rig ($250,000 ex GST) (sale-ehub3425)For Sale$250,000.00Make: SD Model: 100 Year: 2003 Hours: 22,738 (Overall approx.) Engine Hours: 10,793 (New Hour Metre with Current Hours since engine change - 1,977) Onboard Air Capacity: 1,150 CFM / 500 PSI Air Compressor Hours: 12,768 Rotary Head Hours: 2,054 (Since Change Out) Hole Inclination Range: 90-50 degrees Rod String: 4 Met / 6 m Depth Capacity: 60 m Overall Width: 2.95 m - Spare Engine requires rebuild and spares to go with the drill Features - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 22,738
KILOMETERS N/A YEAR 2003
BRAND Home Made
LOCATION Western Australia
MODEL SD 100
-
Wireline Winch & Crown Wheel Assembly ($7,500 ex GST) (sale-ehub3250)For Sale$7,500.00Wireline Cable: 1,000 m + - Hydraulic Motor - Double Sheave Wheel - Assembly for High Tonnage Winch - Top of Mast Assembly Design Wireline Winch Crown Wheel Assembly Location: Victoria, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Victoria, Australia
MODEL N/A
-
Narrow Series KWL350RC DTH Drill Rig Top Head Rotation Drive Unit ($47,500 ex GST) (sale-ehub3114)For Sale$47,500.00Make: Narrow Series Model: KWL350RC DTH Fitted with Twin Saeur Danfoss OMTW 315 Hydraulic Orbital Motors Condition: New (Spare Part) Drill Rig Top Head Rotation Drive Unit Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Narrow Series
LOCATION Western Australia
MODEL KWL350RC DTH
-
Jules Weber Conventional Wheel Mounted Drill Rig ($110,000 ex GST) (sale-ehub3096)For Sale$110,000.00Make / Model: Jules Weber Hours: 3,757 - Bowen Power Swivel / Top Drive - Bourne Draw Works with 18,000 lbs single line pull - 6 Line Travelling Block for a maximum 108,000 lbs hoist - Has drilled down to 900 m a number of times Conventional Wheel Mounted Drill Rig Location: Victoria, Australia Learn MoreMachine hours 3,757
KILOMETERS N/A YEAR N/A BRAND Jules Weber
LOCATION Victoria, Australia
MODEL Jules Weber
-
General Breaker Excavator Hammer GB7TL/GB8ATL 18-22 Tonne Rock Breaker with Toolbox ($24,500 ex GST) (sale-ehub3045)For Sale$24,500.00Make: General Breaker Model: GB7TL/GB8ATL Weight: 18-22 Tonne Titan Headplate: 80 mm pins, 320 mm ears and 470 mm centers - Industry standard breaker with Australian dealer and parts support - Comes with toolbox containing gas charge kit, tools and spares Full in house rebuild with the following new parts; - Tie Rods - Tool Retainers - Upper and Lower Bushes - Full Seal Kit - Charge Valve - Wedge Chisel - All Hardware and Fasteners Flame Resistant Hydraulic Hoses Piston and Bore in Perfect Condition Transport and Storage Stand Supplied Operators Manual in PDF Full 12 month Workshop warranty supplied Excavator Hammer Rock Breaker Location: Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND General Breaker
LOCATION Australia
MODEL GB7TL/GB8ATL
-
2017 Atlas Copco XRVS 1050 Wheel Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3025)For HireMake: Atlas Copco Model: XRVS 1050 Year: 2017 Hours: 816 Wheel Mounted Air Compressor Location: New South Wales, Australia Learn MoreMachine hours 816
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL XRVS 1050
-
Bobcat 730S Backhoe Skid Steer Loader Attachment ($4,000 ex GST) (sale-ehub2000)For Sale$4,000.00Make: Bobcat Model: 730S Attachment Backhoe Skid Steer Loader Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Bobcat
LOCATION Queensland, Australia
MODEL 730S
-
Project Industries Stemming Bucket to Suit Caterpillar 930H Wheel Loader (POA) (sale-ehub1989)For Sale$0.00Make / Model: Project Industries Stemming Bucket Suiting Caterpillar 930H Wheel Loader Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Project Industries
LOCATION Western Australia
MODEL Project Industries
-
1988 Sandvik UDR650 Drill Rig Mounted on 1988 International 2250-D Truck ($295,000 ex GST) (sale-ehub1933)For Sale$295,000.00Rig Make: Sandvik Model: UDR650 Year: 1988 Hours: 6,568 - Historical Maintenance / Service Records Available - UDR650 Equipment Manuals - Upgrade - Mast Replaced March 2019 - Equipment upgraded / refitted every year to comply with standards and maintenance - Department of Transport Pit Inspections - Yearly - Compliance Certifications - NDT - Yearly - Lifting Register - Bi-Annual - Fire Extinguishers - Bi-Annual - Brake Tests - Bi-Annual - Spare Mast & Traverse Cylinder Included - No Onboard Air Compressor - Traverse cylinder - Tower / Mast (The mast was replaced approx. 3 years ago) - Steel hydraulic piping up the tower - New back plate for the Head Rack Truck Make: International Model: 2250-D Year: 1988 KM's: 94,122 Truck Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 6,568
KILOMETERS 94,122
YEAR 1988
BRAND Sandvik
LOCATION Queensland, Australia
MODEL UDR650
-
Humpy Site Office / Workshop Trailers (POA) (sale-ehub1893)For Sale$0.00Specifications; - 50 mm Tow-Ball Coupling & Dual Safety Chains - 50 mm Solid Square Axles - 9 Leaf Load Share Suspension - 12" Inch Electric Brakes - Electric Breakaway Unit - LED Tail, Indicator and Marker Lights - 15" Inch Sunraiser Wheels with 8 Ply Light Truck Tyres - 2 x Spare Wheels - 4 x Adjustable Stabiliser Legs Dimensions; Transport Width: 2.45 m Transport Height: 3.0 m Transport Length: 5.5 m Capacities; - Tare Weight: 2,500 kg to 2,750 kg - ATM: 3,500 kg Functions & Features; - Pigeonholes and under-bench tool storage - 125 mm Multipurpose Vice - Tooling and Hard Hat Hooks - 1 x Personal Access Door - Microwave - Fridge - Storage Cabinets - 5.5 kW Diesel Generator - 4 x Double Power Point GPO 10 AMP - 3.5 kW Daiken Split System Air Conditioner - Water Tank & Hand Wash Station - 8 x 12V/24V LED External Lights - 2 x 240v LED Internal Lighting - Retractable Awning - Dual Wheel Chocks Options; - Open Layout - Open plan full walkthrough - Split Layout - Separate workshop and office Roof mounted AC Unit (Domestic IBIS 4) Two-piece Rear Door 8.0 kW Diesel Generator Humpty Site Office / Workshop Trailers Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
2019 Elastec 770 770 CFM Pulling Vacuum Spill Trailer ($KES13,800,000) (sale-ehub1773)For Sale$0.00Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn MoreMachine hours Less than 250
KILOMETERS Less than 1,000
YEAR 2019
BRAND Elastec
LOCATION Nakuru, Kenya
MODEL 770
-
2 x Cleveland 400W Fully Guarded Trenchers w/ 20' Foot Container of Parts & Spare Engine ($115,000 ex GST each or $230,000 ex GST + Container) (sale-ehub1747)For Sale$115,000.00Make: Cleveland Model: 400W Engine: Caterpillar CAT 3306 Quantity: 2 - Fully Guarded - Full Set of Buckets - Parts Including: - 20' Foot Container with Parts & Spare Engine (To be sold only internationally, not available to be sold in Australia) Trenchers Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Cleveland
LOCATION Queensland, Australia
MODEL 400W
-
1981 Kelsey Hayes Fabco TC140 Transfer Case ($2,750 ex GST) (sale-ehub1640)For Sale$2,750.00Make: Kelsey Hayes Fabco Model: TC140 Year: 1981 Serial No: 525F81 Fabco No: 872091003 Condition: Excellent Working Order *Suits all wheel drive Kenworth, Mack, White or American trucks* Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 1981
BRAND Kelsey Hayes Fabco
LOCATION Western Australia
MODEL TC140
-
Sandvik Tamrock Toro 1250 Underground Loader ($USD56,000) (sale-ehub1603)For Sale$0.00Make: Sandvik Model: Tamrock Toro 1250 Hours: 73 Year: 1997 Underground Loader Location: West Africa Learn MoreMachine hours 73
KILOMETERS N/A YEAR 1997
BRAND Sandvik
LOCATION West Africa
MODEL Tamrock Toro 1250
-
Transmission & Torque Converter to Suit Komatsu HD785-5 Loader ($USD7,750 package deal) (sale-ehub1596)For Sale$0.00Make: Komatsu: Torque Converter Model: TCA49-1A Serial Number: 01432 Year: Unknown Transmission & Torque Converter to Suit Komatsu HD785-5 Loader Location: West Africa Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Komatsu
LOCATION West Africa
MODEL HD785-5
-
Transmission to Suit Komatsu WA600-6 Loader ($USD7,000) (sale-ehub1595)For Sale$0.00Make: Komatsu Model: 426-15-00011 Serial Number: 03670 Year: Unknown Transmission to Suit Komatsu WA600-6 Loader Location: West Africa Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Komatsu
LOCATION West Africa
MODEL 426-15-00011
-
Twin/Dual Sullair 900XHH / 1150XH 500/350 PSI Compressor Air Pack Trailer (FOR HIRE/RENT - POA) (hire-ehub1442)For HireMake: Sullair Model: 900XHH / 1150XH Hours: Approx 2,500 / Approx Less than 500 CFM: 900 / 1150 PSI: 500 / 350 Engine: Caterpillar C-15 ATAAC Engine Displacement: 928 in3 / 15.2 cc Cylinders: 6 Cycles: 4 Bore & Stroke: 5.40 x 6.7 in / 137 x 171 mm RPM: 1800 Power: 540 hp / 403 kW Tri-Axle Mount (DTQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 92 inch / 2,337 mm Less Running Gear (DLQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 83 inch / 2,108 mm 4 - Wheel Mount (DWQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 99 inch / 2,515 mm Track Width Tri-Axle Mount (DTQ) 77 inch / 1,956 mm 4 - Wheel Mount (DWQ) 78 inch / 1,981 mm Weight: 16,040 lb / 7,276 kg *For more information, please contact us* Location: Queensland, Australia Learn MoreMachine hours Approx 2,500 / Approx Less than 500
KILOMETERS N/A
YEAR N/A BRAND Sullair
LOCATION Queensland, Australia
MODEL 900XHH / 1150XH
-
Bourne 2000 TDH-NT Drill Rig Mounted on 6x4 Crane Carrier ($239,500 ex GST) (sale-ehub1272)For Sale$239,500.00Drill Rig Make: Bourne Model: 2000 TDH-NT Truck 6x4 Crane Carrier 12v 1992 GM Powers Truck & Hydraulics 6 Speed Alison Automatic Drives Truck (High & Low Range) Rod Handler 5 1/2" x 8 Bourne Mud Pumps on Board Location: Western Australia Learn MoreMachine hours N/A
KILOMETERS N/A
YEAR N/A BRAND Bourne
LOCATION Western Australia
MODEL 2000 TDH-NT
-
4x 1998 KRUPP SCHRS710/1x15 Wheel / Bucket Excavators ($USD3.3 Million) (sale-ehub1102)For Sale$0.00Make: KRUPP Model: SCHRS710/1x15 Year: 1998 Dimensions (m): 41 x 10.5 x 10 Total weight (tons): 540 Main technical performance: Installed power: 1300KW Production capacity: 3100m3/h Number of buckets: 12 Each bucket volume: 0.71 m3 Bucket wheel diameter: 8.2 m Receiving arm length: 16 m Discharge arm length: 25 m Height of excavation: 15 m Digging depth: 1 m Walking speed: 9 m/min Bucket rotation speed: 6.08 r/min Grade at work: 1:20 Climb when walking: 1:10 Grounding average specific pressure during work: 113 kpa Maximum grounding specific pressure: 193 kpa Condition: Good Location: China Learn MoreMachine hours N/A
KILOMETERS N/A
YEAR 1998
BRAND KRUPP
LOCATION China
MODEL SCHRS710/1x15
-
2022 SPT Type F - 2" Inch Male & 1" Inch Female Gauge ($1,500 ex GST) (sale-ehub658)For Sale$1,500.00Make: SPT Model: Type F – 2” Inch Male & 1” Inch Female Year: 2022 This gauge features the following: - Accurate pressure readings with quick response to pressure changes - Built-in dampening to minimize gauge fluctuations - Liquid filled gauge minimizes vibration and wear to gauge movement - Clear lens for easy reading (6-9 m) - Temperature range -45°C to 120°C - Dimensions 9.875”x4.785” with 3.5” dial - Shipping weight STD – 9 lbs - Shipping weight salt water/corrosive – 13 lbs Part Numbers and Descriptions PRESSURE RANGE STANDARD SERVICE SALT WATER CORROSIVE FLUID 500 PSI Gauge Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2021
BRAND SPT
LOCATION New South Wales, Australia
MODEL Type F - 2" Inch Male & 1" Inch Female
Filter