Search results for: 'wheel to lock for receiv for spare'

Rig Make: Sandvik Model: UDR650 Year: 1988 Hours: 6,568 - Historical Maintenance / Service Records Available - UDR650 Equipment Manuals - Upgrade - Mast Replaced March 2019 - Equipment upgraded / refitted every year to comply with standards and maintenance - Department of Transport Pit Inspections - Yearly - Compliance Certifications - NDT - Yearly - Lifting Register - Bi-Annual - Fire Extinguishers - Bi-Annual - Brake Tests - Bi-Annual - Spare Mast & Traverse Cylinder Included - No Onboard Air Compressor - Traverse cylinder - Tower / Mast (The mast was replaced approx. 3 years ago) - Steel hydraulic piping up the tower - New back plate for the Head Rack Truck Make: International Model: 2250-D Year: 1988 KM's: 94,122 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Specifications; - 50 mm Tow-Ball Coupling & Dual Safety Chains - 50 mm Solid Square Axles - 9 Leaf Load Share Suspension - 12" Inch Electric Brakes - Electric Breakaway Unit - LED Tail, Indicator and Marker Lights - 15" Inch Sunraiser Wheels with 8 Ply Light Truck Tyres - 2 x Spare Wheels - 4 x Adjustable Stabiliser Legs Dimensions; Transport Width: 2.45 m Transport Height: 3.0 m Transport Length: 5.5 m Capacities; - Tare Weight: 2,500 kg to 2,750 kg - ATM: 3,500 kg Functions & Features; - Pigeonholes and under-bench tool storage - 125 mm Multipurpose Vice - Tooling and Hard Hat Hooks - 1 x Personal Access Door - Microwave - Fridge - Storage Cabinets - 5.5 kW Diesel Generator - 4 x Double Power Point GPO 10 AMP - 3.5 kW Daiken Split System Air Conditioner - Water Tank & Hand Wash Station - 8 x 12V/24V LED External Lights - 2 x 240v LED Internal Lighting - Retractable Awning - Dual Wheel Chocks Options; - Open Layout - Open plan full walkthrough - Split Layout - Separate workshop and office Roof mounted AC Unit (Domestic IBIS 4) Two-piece Rear Door 8.0 kW Diesel Generator Humpty Site Office / Workshop Trailers Location: Queensland, Australia Learn More

Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn More

Make: Cleveland Model: 400W Engine: Caterpillar CAT 3306 Quantity: 2 - Fully Guarded - Full Set of Buckets - Parts Including: - 20' Foot Container with Parts & Spare Engine (To be sold only internationally, not available to be sold in Australia) Trenchers Location: Queensland, Australia Learn More

Make: Kelsey Hayes Fabco Model: TC140 Year: 1981 Serial No: 525F81 Fabco No: 872091003 Condition: Excellent Working Order *Suits all wheel drive Kenworth, Mack, White or American trucks* Location: Western Australia Learn More

Make: Edson Model: 3000 Series Year: 1985 Hours: 1,003 - Major Upgrade in 2011 - Set up for Geotech Drilling - Hydraulic Drive Mud Pump *New* - Hydraulic Head Drive Motor *New* - Turbo Perkins Power Pack - Rod Rotation Cage with Hydraulic Lock Out - 2 x Winch - Hydraulic Stillsons - 4 x Hydraulic Jack Legs - Set up for Geotech Drilling and Inclusions make it work ready Jack Up Drill Rig Location: New South Wales, Australia Learn More

Make: Leica Model: DGPS1200 Serial Number: 2674417 Includes: - Battery Charger - Legs - Antenna Dual Frequency GNSS Receiver Location: Queensland, Australia Learn More

Make: Sullair Model: 900XHH / 1150XH Hours: Approx 2,500 / Approx Less than 500 CFM: 900 / 1150 PSI: 500 / 350 Engine: Caterpillar C-15 ATAAC Engine Displacement: 928 in3 / 15.2 cc Cylinders: 6 Cycles: 4 Bore & Stroke: 5.40 x 6.7 in / 137 x 171 mm RPM: 1800 Power: 540 hp / 403 kW Tri-Axle Mount (DTQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 92 inch / 2,337 mm Less Running Gear (DLQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 83 inch / 2,108 mm 4 - Wheel Mount (DWQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 99 inch / 2,515 mm Track Width Tri-Axle Mount (DTQ) 77 inch / 1,956 mm 4 - Wheel Mount (DWQ) 78 inch / 1,981 mm Weight: 16,040 lb / 7,276 kg *For more information, please contact us* Location: Queensland, Australia Learn More

Make: KRUPP Model: SCHRS710/1x15 Year: 1998 Dimensions (m): 41 x 10.5 x 10 Total weight (tons): 540 Main technical performance: Installed power: 1300KW Production capacity: 3100m3/h Number of buckets: 12 Each bucket volume: 0.71 m3 Bucket wheel diameter: 8.2 m Receiving arm length: 16 m Discharge arm length: 25 m Height of excavation: 15 m Digging depth: 1 m Walking speed: 9 m/min Bucket rotation speed: 6.08 r/min Grade at work: 1:20 Climb when walking: 1:10 Grounding average specific pressure during work: 113 kpa Maximum grounding specific pressure: 193 kpa Condition: Good Location: China Learn More

Make: UNKNOWN Model: Wheel Loader Tyre Chains Year: Unknown Subcategory: Loader Tyres Condition: Used Tyre chains to suit CAT 994 Loader Set of x2 Front Used. Approx 75% remaining Location: Western Australia Learn More

Make: Caterpillar Model: 994 Year: 1993 Condition: Used - Full Mine Spec Wheel Loader Location: Western Australia Learn More

Make: Cortech Model: CSD3000 CSD3000 core drilling rig is specially designed for diamond core drilling. It provides precise control on the drilling capacity. The drill head is designed to slide and dump, together with the full angle rotation structure for drill mast, it effectively reduces manual inputs and improves efficiency. The hydraulic legs are stretchable, which broaden the bearing surface, and ensure outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • 9 meters rod pulling largely improves drilling efficiency due to rod collection frame design on mast • The design of side shift by hydraulic of rotation head largely reduces working tensions and guarantees personnel safety • Multi-pressure gauge reads real time pressures for kinds of major components • High/low speed control of main winch largely meets speed requirements for rods handling • Stepless control of mud pump flow facilitates various drilling needs for mud • telescopic mast greatly reduces working tensions and improves drilling efficiency. • Horizontal extension of jack legs guarantees firm rig standing on the ground. • Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • Independent tramming cab set in front provides full view for easy rig walking and driver’s safety • Mast dumping guarantees perfect stability during drilling; • Independent hydraulic jacks facilities leveling of the rig; • Great convenience of control of feed pressure; • Standardized parts and components make maintenance and repairing easy; • Real time reading of drilling data on gauges on the control panel; • Mud pump and mixer powered by the rig’s hydraulic system, controlled directly on the rig’s panel; • Top grade hydraulics of European origin; • Experienced engineers plus adequate spare parts ready to provide full service. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 3,000m 2,300m 1,600m 1,050m Hydraulic System Pressure 28MPa Cooling Air Cooled Power System Model Cummins 6LTAA8.9-C325 Type Turbo Charged Power 239KW Engine RPM 2,200rpm Drill Head Max Torque 8,170Nm Max Rotation ,RPM 1,250rpm Feed Stroke 3,450mm Max Inside Diameter 117mm Max Pull /Max Push 250KN/110KN Main Winch Max Pull 181.44KN Pulling Speed Low:33m/min High:70m/min Rope Diameter 24mm Rope Length 41m Wireline Winch Max Pull 18KN(bare drum) Pulling Speed 150m/min(bare drum) Rope Diameter 6.6mm Rope Length 2,500m Mast Length 11.2-13.7m Drilling Angle 45°-90° Dump Length 1.4m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 11,240×2,310×3,330mm Total Weight 23.5t Diamond Coring Drill Rig Location: China Learn More