Search results for: 'boart gear high for size'
- Did you mean
- boart gear high for sale
- boart gear hire for size
- Related search terms
- boart green hire for sale
- boart greas hire for sale
- boart gener hire for sale
- size we enabled rate in bore
- size we enabled rate in base
-
2004 Cubex QXR 920 Track Mounted Surface Drill Rig ($185,000 ex GST) (sale-ehub3439)For Sale$185,000.00Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn MoreMachine hours 16,896
KILOMETERS N/A YEAR 2004
BRAND Cubex
LOCATION Western Australia
MODEL QXR 920
-
FMC L1122 Horizontal Triplex Piston Pumps (POA) (sale-ehub3435)For Sale$0.00Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION New South Wales, Australia
MODEL L1122
-
Various Size, Shank, Head & Insert Halco & Karbo Drill Bits (POA) (sale-ehub3430)For Sale$0.0074x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Canada
MODEL Halco Mach 44/303 & Karbo
-
Custom 600 RRD Track Mounted Drill Rig (POA) (sale-ehub3428)For Sale$0.00Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Home Made
LOCATION Canada
MODEL 600 RRD
-
6x Sandvik DR560/80 Track Mounted Contour DTH Drill Rigs (FOR HIRE/RENT - POA) (hire-ehub3356)For HireMake: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn MoreMachine hours Various
KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL DR560/80
-
Various Hose Restraints, Cable Stockings, Safety Shackles & Cambuckles / Hose Straps (POA) (sale-ehub3284)For Sale$0.00*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL See Description for Sizes
-
Wireline Winch & Crown Wheel Assembly ($7,500 ex GST) (sale-ehub3250)For Sale$7,500.00Wireline Cable: 1,000 m + - Hydraulic Motor - Double Sheave Wheel - Assembly for High Tonnage Winch - Top of Mast Assembly Design Wireline Winch Crown Wheel Assembly Location: Victoria, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Victoria, Australia
MODEL N/A
-
Atlas Copco Air End (Open to Offers) (sale-ehub3220)For Sale$0.00Make / Model: Atlas Copco Size: Unknown Condition: Unknown Air End Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION Western Australia
MODEL Atlas Copco
-
3x Sullair High Pressure 500 PSI Rotary Screw Air Ends ($19,500 ex GST for the lot) (sale-ehub3116)For Sale$19,500.00Make: Sullair Model: Dino DXN12 (ID Plate on 1 Unit Only) - Plus 1 only Disassembled Quantity: 3 High Pressure Compressor Units Rotary Screw Air Ends Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sullair
LOCATION Western Australia
MODEL Dino DXN12 (ID Plate on 1 Unit Only)
-
FMC L1622HV Triplex Bean Skid Mounted Mud Pumps (POA) (sale-ehub3076)For Sale$0.00Make: FMC Model: L1622HV Triplex Pressure: Maximum 1500 PSI - Minimum 100 PSI Fluids Used: Various grades of muds & water - This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 PSI. - The pump skid weighs only 2450 kg (wet) and only covers an area of 2.4 m x 1.92 m making it very easy to move into restricted areas due to its compact abilities. - Because of its limited size it makes it very easy to transport to various locations. - The pump skid is compact yet practical to access any part of the pumps. Skid Mounted Bean Mud Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION Queensland, Australia
MODEL L1622HV
-
2 Sets x 8 5/8" Inch - 9" Inch Tongs ($9,500 ex GST) (sale-ehub2006)For Sale$9,500.00Tongs Size: 8 5/8" Inch - 9" Inch - Free and working Quantity: 2 Sets Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 8 5/8" Inch - 9" Inch
-
Sandvik G88 Excavator Hammer (POA) (sale-ehub1992)For Sale$0.00Make: Sandvik Model: G88 Between Ears: 420 mm Pin Size: 100 mm Pin Centres: 590 mm Excavator Hammer Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL G88
-
Ranger Digital Camera with Included Rods & OR Gear ($17,500 ex GST) (sale-ehub1964)For Sale$17,500.00Ranger Digital Camera Included; - All Rods - OR Gear Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
2019 Elastec 770 770 CFM Pulling Vacuum Spill Trailer ($KES13,800,000) (sale-ehub1773)For Sale$0.00Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn MoreMachine hours Less than 250
KILOMETERS Less than 1,000
YEAR 2019
BRAND Elastec
LOCATION Nakuru, Kenya
MODEL 770
-
2008 Atlas Copco ROC D9C Blast Hole Track Mounted Drill Rig ($117,500 ex GST) (sale-ehub1722)For Sale$117,500.00Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 12,000 - 13,000
KILOMETERS N/A YEAR 2008
BRAND Atlas Copco
LOCATION Queensland, Australia
MODEL ROC D9C
-
2012 Variable Frequency Drive House within 20' Foot Shipping Container (POA) (sale-ehub1715)For Sale$0.00Variable Frequency Drive House 20' Foot Shipping Container Year: 2012 - Assorted Breakers - Control Panels - Switch Gear and Connections - Fold Down Access Walkways Condition: Good Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2012
BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
15 x *New* 127 mm Down Hole Bits ($550 ex GST each) (sale-ehub1615)For Sale$550.00Down Hole Bits Type / Size: 127 mm Quantity: 15 *New* Location: Northern Territory Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory
MODEL N/A
-
Twin/Dual Sullair 900XHH / 1150XH 500/350 PSI Compressor Air Pack Trailer (FOR HIRE/RENT - POA) (hire-ehub1442)For HireMake: Sullair Model: 900XHH / 1150XH Hours: Approx 2,500 / Approx Less than 500 CFM: 900 / 1150 PSI: 500 / 350 Engine: Caterpillar C-15 ATAAC Engine Displacement: 928 in3 / 15.2 cc Cylinders: 6 Cycles: 4 Bore & Stroke: 5.40 x 6.7 in / 137 x 171 mm RPM: 1800 Power: 540 hp / 403 kW Tri-Axle Mount (DTQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 92 inch / 2,337 mm Less Running Gear (DLQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 83 inch / 2,108 mm 4 - Wheel Mount (DWQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 99 inch / 2,515 mm Track Width Tri-Axle Mount (DTQ) 77 inch / 1,956 mm 4 - Wheel Mount (DWQ) 78 inch / 1,981 mm Weight: 16,040 lb / 7,276 kg *For more information, please contact us* Location: Queensland, Australia Learn MoreMachine hours Approx 2,500 / Approx Less than 500
KILOMETERS N/A
YEAR N/A BRAND Sullair
LOCATION Queensland, Australia
MODEL 900XHH / 1150XH
-
2022 DW400C Track Mounted Crawler Drill Rig - Truck Mounted If Requested (POA) (sale-ehub1431)For Sale$0.00Make/Model: DW400C Year: New (2022) Machine Hours: 0 Engine: Cummins 6LTAA8.9 @ 360 HP Includes: - Sauer Danfoss Load Sensed Piston Pumps - Sauer Danfoss PVG Valves - 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque - Sliding Head - Tilting Head - Floating Spindle with 2.5" Waterway - 25 Tonne Pullback - Dump Mast (Long Stroke) - 20" Inch Diameter Through the Work Table - Breakout Ram - 8 7.5" Inch Mud Pump (Made in India) - 10 Tonne Single Pull Winch Mounted on Top of Mast - Manuli Hoses on All High Pressure Lines - 4 x Enclosed Outriggers - Can extend for ease of loading onto a lowbed trailer *Can easily be converted to RC due to the large thru-hole in the rotation head* *Can be delivered on rails for mounting onto any truck* Location: Philippines Learn MoreMachine hours N/A KILOMETERS N/A
YEAR 2021
BRAND Bundok
LOCATION Philippines
MODEL DW400C
-
2007 Oilwell Duplex 7 1/2" x 14 214-P Self-Contained Skid Mud Pump ($40,000 ex GST) (sale-ehub1388)For Sale$40,000.00Make: Oilwell Model: Duplex 214-P Year: 2007 Hours: Low Dimensions (L x W x H): 5440 mm x 2750 mm 2200 mm Weight: 16.16 T Engine: Mercedes Engine Model: OM457LA Power: 422 HP / 315 kW RPM: 1800 Max Torque: 2000 Nm @ 1200 RPM 7 1/2 x 14 Liner Sizes from 5 1/2 to 7 1/4 Max Pressure 5 1/2" Liner: 1875 PSI @ 345 Gallons / min Max Volume 7 1/4" Liner: 765 PSI @ 620 Gallons / min Self-Contained Skid with 350L Diesel Tank Care and Operation Manual available w/ Full Specifications Condition: Good Location: Queensland, Australia Learn MoreMachine hours Low
KILOMETERS Oilwell Duplex 214-P
YEAR 2007
BRAND Oilwell
LOCATION Queensland, Australia
MODEL Duplex 214-P
Filter