Search results for: 'brand greas hose for size'
- Did you mean
- brand greas hose for sale
- brand greas hire for size
- Related search terms
- For the linear program Max 6A 7B s.t. 1A 2B ≤ 4 5A 3B ≤ 15 A, B ≥ 0 find the optimal solution using the gra
- hose to enabl 100 hz and adaptive sync
- brand greas hire for sale
- greas hire for sale uk
- hose to enabl 110 hz and adaptive size
-
FMC L1622HV Triplex Bean Skid Mounted Mud Pumps (POA) (sale-ehub3076)For Sale$0.00Make: FMC Model: L1622HV Triplex Pressure: Maximum 1500 PSI - Minimum 100 PSI Fluids Used: Various grades of muds & water - This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 PSI. - The pump skid weighs only 2450 kg (wet) and only covers an area of 2.4 m x 1.92 m making it very easy to move into restricted areas due to its compact abilities. - Because of its limited size it makes it very easy to transport to various locations. - The pump skid is compact yet practical to access any part of the pumps. Skid Mounted Bean Mud Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION Queensland, Australia
MODEL L1622HV
-
SICK LMS151-10100S01 Brand New Laser ($12,000 ex GST) (sale-ehub3073)For Sale$12,000.00Make: SICK Model: LMS151-10100S01 Year: 2022 Brand New In Original Box Laser Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2021
BRAND SICK
LOCATION Queensland, Australia
MODEL LMS151-10100S01
-
General Breaker Excavator Hammer GB7TL/GB8ATL 18-22 Tonne Rock Breaker with Toolbox ($24,500 ex GST) (sale-ehub3045)For Sale$24,500.00Make: General Breaker Model: GB7TL/GB8ATL Weight: 18-22 Tonne Titan Headplate: 80 mm pins, 320 mm ears and 470 mm centers - Industry standard breaker with Australian dealer and parts support - Comes with toolbox containing gas charge kit, tools and spares Full in house rebuild with the following new parts; - Tie Rods - Tool Retainers - Upper and Lower Bushes - Full Seal Kit - Charge Valve - Wedge Chisel - All Hardware and Fasteners Flame Resistant Hydraulic Hoses Piston and Bore in Perfect Condition Transport and Storage Stand Supplied Operators Manual in PDF Full 12 month Workshop warranty supplied Excavator Hammer Rock Breaker Location: Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND General Breaker
LOCATION Australia
MODEL GB7TL/GB8ATL
-
2 Sets x 8 5/8" Inch - 9" Inch Tongs ($9,500 ex GST) (sale-ehub2006)For Sale$9,500.00Tongs Size: 8 5/8" Inch - 9" Inch - Free and working Quantity: 2 Sets Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 8 5/8" Inch - 9" Inch
-
Various Seamless Steel Drill Pipe with Tool Joints (POA) (sale-ehub2005)For Sale$0.00Seamless Steel Drill Pipe with Tool Joints API Specification 5DP PSL 1 - 35" Inch Pin Taper Shoulder - Tool Joints will be included with 18 Deg Box - 2" Inch XL Tong Space & Threads shall be phosphatised - Internal Plastic Coating - Fitted with presses steel thread protectors on both ends - Shall be coated on the outside with rust preventing coating to withstand marine transportation. - Will be API Monogrammed Quantity: Various *Brand New* Drill Pipe Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A -
Sandvik G88 Excavator Hammer (POA) (sale-ehub1992)For Sale$0.00Make: Sandvik Model: G88 Between Ears: 420 mm Pin Size: 100 mm Pin Centres: 590 mm Excavator Hammer Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL G88
-
Thor Mast with Hoist Cylinders to suit Thor RC Drill Rig (POA) (sale-ehub1938)For Sale$0.00Make / Model: Thor Type: RC Brand New Unused -Complete with Hoist Cylinders - Rated to 30 tonne pullback - Cable-less hoisting system To suit Thor RC Drill Rig Location: Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Thor
LOCATION Australia
MODEL Thor
-
1993 Edson 8000 Drill Rig Mounted on International 8x4 Truck ($190,000 ex GST) (sale-ehub1892)For Sale$190,000.00Rig Make: Edson Model: 8000 Year: 1993 Hours: 4,600 Engine: Cummins 855 @ 300 HP Deck Engine Mast: 11.5 m Pullback: 16 Tonne Stroke: 7 m Includes; - Dump Mast & Sliding Base - 13 Tonne Winch - 9 m Rod Pull - Head Side Rack - 2 Tonne Wireline Winch - Dual W1122 Bean Pumps - Foot Clamps - Overshot - Burst Protection on Hosing - E-Stops - Has Fire Suppression System Installed (Out of date) Rig Truck Make / Model: International Engine: Cummins 855 @ 400 HP Type: 8x4 - Road Ranger Box Truck Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 1993
BRAND Edson
LOCATION Queensland, Australia
MODEL 8000
-
Hydraulic Cylinder to Suit Atlas Copco Pit Viper PV271 / PV275 Drill Rig ($450 ex GST) (sale-ehub1884)For Sale$450.00Make: Atlas Copco Model: Pit Viper PV271 / PV275 Year: 2020 Hydraulic Cylinder Brand New - Has been pulled apart to check and lube seals Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2020
BRAND Atlas Copco
LOCATION Queensland, Australia
MODEL Pit Viper PV271 / PV275
-
Caterpillar CAT 6040/RH170 Excavator Suited Swing Pump ($22,000 ex GST) (sale-ehub1809)For Sale$22,000.00Make: Caterpillar Model: 6040/RH170 Year: 2021 Related Part Numbers: - 4689833 - 1459385 - 3748751 - 20R2017 - Component is genuine Bosch Rexroth - Brand New In Box, Never Been Used Weight: 170 kg Excavator Suited Swing Pump Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2021
BRAND Caterpillar
LOCATION Western Australia
MODEL 6040/RH170
-
2019 Elastec 770 770 CFM Pulling Vacuum Spill Trailer ($KES13,800,000) (sale-ehub1773)For Sale$0.00Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn MoreMachine hours Less than 250
KILOMETERS Less than 1,000
YEAR 2019
BRAND Elastec
LOCATION Nakuru, Kenya
MODEL 770
-
14 x Cummins 3406592 Genuine Brand New Injectors ($8,500 ex GST for the lot) (sale-ehub1756)For Sale$8,500.00Make: Cummins Model: 3406592 Quantity: 14 - Brand New - No Core Required Genuine Injectors Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Cummins
LOCATION Queensland, Australia
MODEL 3406592
-
2008 Atlas Copco ROC D9C Blast Hole Track Mounted Drill Rig ($117,500 ex GST) (sale-ehub1722)For Sale$117,500.00Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 12,000 - 13,000
KILOMETERS N/A YEAR 2008
BRAND Atlas Copco
LOCATION Queensland, Australia
MODEL ROC D9C
-
15 x *New* 127 mm Down Hole Bits ($550 ex GST each) (sale-ehub1615)For Sale$550.00Down Hole Bits Type / Size: 127 mm Quantity: 15 *New* Location: Northern Territory Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory
MODEL N/A
-
2018 Epiroc ME3 / ME5 Rock Drill Rig ($USD407,000) (sale-ehub1463)For Sale$0.00Make: Epiroc Model: ME3 / ME5 Year: 2018 Hours: 0 Max. Machine Mass: 7,100 kg ROPS / FOBS Model No: 4140 3302 31 / 4140 3302 32 CAB / Canopy Serial No: ACN0915 / ARN0915 *Brand New* Rock Drill Rig Location: China Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2018
BRAND Epiroc
LOCATION China
MODEL ME3 / ME5
-
2022 DW400C Track Mounted Crawler Drill Rig - Truck Mounted If Requested (POA) (sale-ehub1431)For Sale$0.00Make/Model: DW400C Year: New (2022) Machine Hours: 0 Engine: Cummins 6LTAA8.9 @ 360 HP Includes: - Sauer Danfoss Load Sensed Piston Pumps - Sauer Danfoss PVG Valves - 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque - Sliding Head - Tilting Head - Floating Spindle with 2.5" Waterway - 25 Tonne Pullback - Dump Mast (Long Stroke) - 20" Inch Diameter Through the Work Table - Breakout Ram - 8 7.5" Inch Mud Pump (Made in India) - 10 Tonne Single Pull Winch Mounted on Top of Mast - Manuli Hoses on All High Pressure Lines - 4 x Enclosed Outriggers - Can extend for ease of loading onto a lowbed trailer *Can easily be converted to RC due to the large thru-hole in the rotation head* *Can be delivered on rails for mounting onto any truck* Location: Philippines Learn MoreMachine hours N/A KILOMETERS N/A
YEAR 2021
BRAND Bundok
LOCATION Philippines
MODEL DW400C
-
3 x Schlumberger KUDU Hydraulic Pumping Units (HPU) ($4,000 ex GST each) (sale-ehub1395)For Sale$4,000.00Make: Schlumberger Model: KUDU Hours: Unknown Units: 3 V8 GM Gas Fired Power Plant Hazardous Zone Compliant Fitted w/ Lufkin Well Manager Minespec'd w/ Mine Sleeve on the Hydraulic Hoses and Battery Isolators Condition: Good Location: New South Wales, Australia Learn MoreMachine hours N/A
KILOMETERS N/A
YEAR N/A BRAND Schlumberger
LOCATION New South Wales, Australia
MODEL KUDU
-
2007 Oilwell Duplex 7 1/2" x 14 214-P Self-Contained Skid Mud Pump ($40,000 ex GST) (sale-ehub1388)For Sale$40,000.00Make: Oilwell Model: Duplex 214-P Year: 2007 Hours: Low Dimensions (L x W x H): 5440 mm x 2750 mm 2200 mm Weight: 16.16 T Engine: Mercedes Engine Model: OM457LA Power: 422 HP / 315 kW RPM: 1800 Max Torque: 2000 Nm @ 1200 RPM 7 1/2 x 14 Liner Sizes from 5 1/2 to 7 1/4 Max Pressure 5 1/2" Liner: 1875 PSI @ 345 Gallons / min Max Volume 7 1/4" Liner: 765 PSI @ 620 Gallons / min Self-Contained Skid with 350L Diesel Tank Care and Operation Manual available w/ Full Specifications Condition: Good Location: Queensland, Australia Learn MoreMachine hours Low
KILOMETERS Oilwell Duplex 214-P
YEAR 2007
BRAND Oilwell
LOCATION Queensland, Australia
MODEL Duplex 214-P
-
Brand New 4x HQ3 S/S Diamond Tip Core 5 Step & 7 Step Bits (POA) (sale-ehub1131)For Sale$0.00*BRAND NEW* 4x HQ3 S/S Diamond Tip Core Bit 5 & 7 Step 5 Step: Diamond Size: 30/40 SPC Grade AA Carat WT: 22 CTS Face Discharge: 8 Water Discharge 10 mm x 4 mm Core DIA: 63.5 mm Bit OD: 95.6 mm Standard Thread Information on 7 Step Bit coming soon, or please contact us if you would like the information ASAP. Location: Australia Learn MoreMachine hours N/A
KILOMETERS N/A
YEAR N/A BRAND N/A LOCATION Australia
MODEL 5 Step & 7 Step
-
2022 Plastic P-Size 3m, H-Size 4m, N-Size 5m Core Boxes / Trays (POA) (sale-ehub1076)For Sale$0.00P-Size Wireline Size: PWL / PQ / PQ3 Year: 2022 Core Diameter: 65-86 mm Core Capacity: 3x1 m Dimensions: L - 107 cm / W - 34 cm / H - 10 cm Weight: 1.9 kg Weight w/ Cover: 2.9 kg Pallet Capacity: 175 pcs H-Size Wireline Size: HWL / HQ / HQ3 Core Diameter: 49 - 64 mm Core Capacity: 4x1 m Dimensions: L - 107 cm / W - 34 cm / H - 8 cm Weight: 1.9 kg Weight w/ Cover: 2.9 kg Pallet Capacity: 175 pcs N-Size Wireline Size: NWL / NQ / NQ3 Core Diameter: 37 - 48 mm Core Capacity: 5x1 m Dimensions: L - 107 cm / W - 34 cm / H - 6 cm Weight: 1.8 kg Weight w/ Cover: 2.8 kg Pallet Capacity: 270 pcs Location: Turkey Learn MoreMachine hours N/A
KILOMETERS N/A
YEAR 2021
BRAND Kayen
LOCATION Turkey
MODEL P-Size / H-Size / N-Size
Filter