Search results for: 'hole for size clermont cooler'
- Related search terms
- forest river r poa 20 for sale
- ford revers r poa 2024 for sale
- cooler hire for sale in california
- hole to enabled foot charging viper
- for river r poa 20 for sale
- 30x Metres of 6 Metre 2-7/8" Inch IF 4" Inch OD Drill Rod / Pipe ($600 ex GST per length) (sale-ehub3346)For Sale$600.00Type: 2-7/8" Inch IF / 4" Inch OD Length: 6 m - Were purchased out of USA original and were 20' (6.2 metres), then remanufactured with a “baker joint” to make them 6 metre lengths - Not required anymore due to offset joint interferes with UDR style rod spinner Condition: Excellent - 70-80 Metres are new and have never been down a hole (rest have only been down one hole) Quantity: Approx. 30 Metres Drill Rod / Pipe Location: New South Wales, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL 2-7/8" Inch IF / 4" Inch OD
- NW500 126HP Heli / Man Portable Drill Rig + Package (POA) (sale-ehub3327)For Sale$0.00Drill Rig Make: NW Model: 500 - Heli / Man Portable 126 HP Included; - Hydraulic Control Panel - Hydraulic Reservoir c/w Oil to Water Heat Exchanger - 3x Kubota Turbo Charged Diesel Engines @ 42 HP - Light Weight 39 GPM Down Hole Pump - 220 Litre Fuel Tank and AL Stand Feed Frame Complete - Wireline Winch with 750 m 3/16" Inch Wireline Installed - Top Drive Drill Head with Adapter Sub for HWL Drill Rod - Two Rotation Motors for NWL & HWL Drill Rod - 4.5" Inch Rod Clamp c/w Jaws and Steadier Bearing for H & N Rods - Hydraulic Mud Mixer with Safety Shielding - Light Weight AL Mast Rotation Guard - Spline Wrench for Locking Head to change out Drilling Subs Heli Portable Drill Rig Package Location: Canada Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND NW
LOCATION Canada
MODEL 500
- Various Hose Restraints, Cable Stockings, Safety Shackles & Cambuckles / Hose Straps (POA) (sale-ehub3284)For Sale$0.00*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL See Description for Sizes
- Atlas Copco Air End (Open to Offers) (sale-ehub3220)For Sale$0.00Make / Model: Atlas Copco Size: Unknown Condition: Unknown Air End Location: Western Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION Western Australia
MODEL Atlas Copco
- Air Radiators Victoria NFQ31380 Oil Cooler Pack (Open to Offers) (sale-ehub3206)For Sale$0.00Make: Air Radiators Victoria Model / Part No: NFQ31380 - Suitable for UDR650 Cummins 6BTA or Caterpillar CAT 3056 Oil Cooler Pack Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND Air Radiators Victoria
LOCATION Queensland, Australia
MODEL NFQ31380
- 70x Lengths of American Open Hole 2 7/8" Inch 6 Metre Drill Rod / Pipe ($195 ex GST each) (sale-ehub3171)For Sale$195.00Make: American Open Hole Model: 2 7/8" Inch 6 Metre Mid Body OD: 73 mm Tool Joint OD: 95 mm Quantity: 70 Lengths Drill Rod / Pipe Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND American Manufacturing Company
LOCATION N/A MODEL 2 7/8" Inch 6 Metre
- FMC L1622HV Triplex Bean Skid Mounted Mud Pumps (POA) (sale-ehub3076)For Sale$0.00Make: FMC Model: L1622HV Triplex Pressure: Maximum 1500 PSI - Minimum 100 PSI Fluids Used: Various grades of muds & water - This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 PSI. - The pump skid weighs only 2450 kg (wet) and only covers an area of 2.4 m x 1.92 m making it very easy to move into restricted areas due to its compact abilities. - Because of its limited size it makes it very easy to transport to various locations. - The pump skid is compact yet practical to access any part of the pumps. Skid Mounted Bean Mud Pump Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION Queensland, Australia
MODEL L1622HV
- 2 Sets x 8 5/8" Inch - 9" Inch Tongs ($9,500 ex GST) (sale-ehub2006)For Sale$9,500.00Tongs Size: 8 5/8" Inch - 9" Inch - Free and working Quantity: 2 Sets Location: Queensland, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 8 5/8" Inch - 9" Inch
- Sandvik G88 Excavator Hammer (POA) (sale-ehub1992)For Sale$0.00Make: Sandvik Model: G88 Between Ears: 420 mm Pin Size: 100 mm Pin Centres: 590 mm Excavator Hammer Location: Western Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL G88
- 32 x Lengths 3 Metre Used NQ Drill Rods / Pipe ($90 ex GST each) (sale-ehub1967)For Sale$90.00NQ Drill Rods Length: 3 Metres Quantity: 32 Used - Once used on 1 hole Location: Victoria, Australia Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Victoria, Australia
MODEL 3 Metres
- 2008 Atlas Copco ROC D9C Blast Hole Track Mounted Drill Rig ($117,500 ex GST) (sale-ehub1722)For Sale$117,500.00Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn More
Machine hours 12,000 - 13,000
KILOMETERS N/A YEAR 2008
BRAND Atlas Copco
LOCATION Queensland, Australia
MODEL ROC D9C
- 15 x *New* 127 mm Down Hole Bits ($550 ex GST each) (sale-ehub1615)For Sale$550.00Down Hole Bits Type / Size: 127 mm Quantity: 15 *New* Location: Northern Territory Learn More
Machine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory
MODEL N/A
- Keypower 6v92 1400 CFM / 750 PSI Booster (FOR HIRE/RENT - POA) (hire-ehub1446)For HireMake: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Has a stand alone fuel tank* Location: Queensland, Australia Learn More
Machine hours TBA
KILOMETERS N/A
YEAR N/A BRAND Key Power
LOCATION Queensland, Australia
MODEL 6v92TA1400
- Keypower 6v92 1400 CFM / 750 PSI Booster (FOR HIRE/RENT - POA) (hire-ehub1444)For HireMake: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Doesn't have a stand alone fuel tank* Location: Queensland, Australia Learn More
Machine hours TBA
KILOMETERS N/A
YEAR N/A BRAND Key Power
LOCATION Queensland, Australia
MODEL 6v92TA1400
- 2022 DW400C Track Mounted Crawler Drill Rig - Truck Mounted If Requested (POA) (sale-ehub1431)For Sale$0.00Make/Model: DW400C Year: New (2022) Machine Hours: 0 Engine: Cummins 6LTAA8.9 @ 360 HP Includes: - Sauer Danfoss Load Sensed Piston Pumps - Sauer Danfoss PVG Valves - 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque - Sliding Head - Tilting Head - Floating Spindle with 2.5" Waterway - 25 Tonne Pullback - Dump Mast (Long Stroke) - 20" Inch Diameter Through the Work Table - Breakout Ram - 8 7.5" Inch Mud Pump (Made in India) - 10 Tonne Single Pull Winch Mounted on Top of Mast - Manuli Hoses on All High Pressure Lines - 4 x Enclosed Outriggers - Can extend for ease of loading onto a lowbed trailer *Can easily be converted to RC due to the large thru-hole in the rotation head* *Can be delivered on rails for mounting onto any truck* Location: Philippines Learn More
Machine hours N/A KILOMETERS N/A
YEAR 2021
BRAND Bundok
LOCATION Philippines
MODEL DW400C
- 2007 Oilwell Duplex 7 1/2" x 14 214-P Self-Contained Skid Mud Pump ($40,000 ex GST) (sale-ehub1388)For Sale$40,000.00Make: Oilwell Model: Duplex 214-P Year: 2007 Hours: Low Dimensions (L x W x H): 5440 mm x 2750 mm 2200 mm Weight: 16.16 T Engine: Mercedes Engine Model: OM457LA Power: 422 HP / 315 kW RPM: 1800 Max Torque: 2000 Nm @ 1200 RPM 7 1/2 x 14 Liner Sizes from 5 1/2 to 7 1/4 Max Pressure 5 1/2" Liner: 1875 PSI @ 345 Gallons / min Max Volume 7 1/4" Liner: 765 PSI @ 620 Gallons / min Self-Contained Skid with 350L Diesel Tank Care and Operation Manual available w/ Full Specifications Condition: Good Location: Queensland, Australia Learn More
Machine hours Low
KILOMETERS Oilwell Duplex 214-P
YEAR 2007
BRAND Oilwell
LOCATION Queensland, Australia
MODEL Duplex 214-P
- Sandvik UDR650 / DE810 Radiator / Cooler Pack (Open to Offers) (sale-ehub1227)For Sale$0.00Make: Sandvik Model: UDR650 / DE810 Part: Radiator / Cooler Pack Location: Queensland, Australia Learn More
Machine hours N/A
KILOMETERS N/A
YEAR N/A BRAND Sandvik
LOCATION Queensland, Australia
MODEL UDR650 / DE810
- Brand New 4x HQ3 S/S Diamond Tip Core 5 Step & 7 Step Bits (POA) (sale-ehub1131)For Sale$0.00*BRAND NEW* 4x HQ3 S/S Diamond Tip Core Bit 5 & 7 Step 5 Step: Diamond Size: 30/40 SPC Grade AA Carat WT: 22 CTS Face Discharge: 8 Water Discharge 10 mm x 4 mm Core DIA: 63.5 mm Bit OD: 95.6 mm Standard Thread Information on 7 Step Bit coming soon, or please contact us if you would like the information ASAP. Location: Australia Learn More
Machine hours N/A
KILOMETERS N/A
YEAR N/A BRAND N/A LOCATION Australia
MODEL 5 Step & 7 Step
- 2022 Plastic P-Size 3m, H-Size 4m, N-Size 5m Core Boxes / Trays (POA) (sale-ehub1076)For Sale$0.00P-Size Wireline Size: PWL / PQ / PQ3 Year: 2022 Core Diameter: 65-86 mm Core Capacity: 3x1 m Dimensions: L - 107 cm / W - 34 cm / H - 10 cm Weight: 1.9 kg Weight w/ Cover: 2.9 kg Pallet Capacity: 175 pcs H-Size Wireline Size: HWL / HQ / HQ3 Core Diameter: 49 - 64 mm Core Capacity: 4x1 m Dimensions: L - 107 cm / W - 34 cm / H - 8 cm Weight: 1.9 kg Weight w/ Cover: 2.9 kg Pallet Capacity: 175 pcs N-Size Wireline Size: NWL / NQ / NQ3 Core Diameter: 37 - 48 mm Core Capacity: 5x1 m Dimensions: L - 107 cm / W - 34 cm / H - 6 cm Weight: 1.8 kg Weight w/ Cover: 2.8 kg Pallet Capacity: 270 pcs Location: Turkey Learn More
Machine hours N/A
KILOMETERS N/A
YEAR 2021
BRAND Kayen
LOCATION Turkey
MODEL P-Size / H-Size / N-Size
- 2015 Various Size Towable Water Cab Tanks (POA) (sale-ehub1070)For Sale$0.00Various Sizes Towable Water Tanks 2015 Model Tare: 480 kg Type: Water Cab VIN: 6T9T23WAIFOMW0023 Learn More
Machine hours N/A
KILOMETERS N/A
YEAR 2015
BRAND N/A LOCATION N/A MODEL N/A