Search results for: 'hours for self in cherry hire nj'

Make: LiuTech (Atlas Copco) Model: LUY400-25 Year: 2018/2019 Hours: 1,000 approx. 1,280 CFM 350 PSI Portable Air Compressor Location: Western Australia Learn More

Make: Caterpillar Model: 16 GC Year: 2021 Hours: 5,700 - Sold Offshore Motor Grader Location: United States of America Learn More

Make: Sullair Model: 900XHHDTQ Year: 2007 Hours: 1,399 (Hour Meter has stopped working) 900 CFM 500 PSI - Tri Axle Trailer Portable Air Compressor Location: New South Wales, Australia Learn More

Make: Hydco Model: 8V92 Year: 2021 Hours: 7,370 - New Air Side at 500 hours - Pistons, Rings, Barrels, etc. all out of Hydco - New Blower fitted in December with 60 hours - New Fuel Rack and Tune Up completed - Spare PRV's 1,800 CFM 900 PSI Skid Mounted Booster Location: Northern Territory, Australia Learn More

Make: Komatsu Model: HD785-7 Year: 2023 Hours: 12,000 approx. each (+/-) Quantity: 5 Dump Trucks Location Vietnam Learn More

Make: EDM Model: 1500 Hours: 4,161 Engine: 2x Cummins 4BTA 3.9 Engine Hours: 200 Capacity: NQ up to 1,500 metres deep - Rod Spinner with Hydraulic Cut-Out for Enhanced Safety - Wireline Spooler - Main and Wireline Winch overrides to prevent accidental pull-throughs Heli-Portable Diamond Drill Rig Location: Indonesia Learn More

Unit 1; Make: Komatsu Model: HD785-7 Year: 2014 Hours: 16,419 Unit 2; Make: Komatsu Model: HD785-7 Year: 2014 Hours: 18,564 Unit 3; Make: Komatsu Model: HD785-7 Year: 2013 Hours: 24,903 Unit 4; Make: Komatsu Model: HD785-7 Year: 2012 Hours: 17,633 Unit 5; Make: Komatsu Model: HD785-7 Year: 2012 Hours: 18,745 Unit 6; Make: Komatsu Model: HD785-7 Year: 2012 Hours: 19,742 Unit 7; Make: Komatsu Model: HD785-7 Year: 2012 Hours: 20,252 Unit 8; Make: Komatsu Model: HD785-7 Year: 2011 Hours: 24,035 Unit 9; Make: Komatsu Model: HD785-7LC Year: 2008 Hours: 18,568 Unit 10; Make: Komatsu Model: HD785-7LC Year: 2008 Hours: 19,875 Dump Trucks Location: Chile Learn More

Make: Caterpillar Model: 390FL Year: 2020 Hours: 19,391 - Auxiliary Hydraulics (Never Used - Hoses were removed) - 2x Buckets in Good Condition; 1x with almost no use - No EPA Track Mounted Excavator Location: South America Learn More

Make: Caterpillar Model: 825G Year: 2003 Hours: 10,356 Soil Compactor Location: United States of America Learn More

Make: Weir Minerals Model: MHD-100HV Rated RPM: 186 kW @ 2,200 RPM Suction Diameter: 150 mm Discharge Diameter: 200 mm Suction Flange: 406 OD x 200 ID 8 Holes 21 Dia. On 356 PCD Discharge Flange: 368 OD x 150 ID 8 Holes 21 Dia. On 324 PCD - Hydraulic Powered Highwall Pump Unit Location: Western Australia Learn More

Make: Caterpillar Model: 994F Year: 2007 Hours: 52,528 - Good Working Condition Wheel Loader Location: Peru Learn More

Make: Caterpillar Model: A60H Hours: Under 6,000 - Non EPA Articulated Dump Trucks Location: Philippines Learn More

Drill Rig Make: Schramm Model: T130 Year: 2006 Hours: 13,878 - Refurbished Rod Presenter Make: OXT Engineering Model: PJA180 Year: 2016 - Trailer Location: Western Australia Learn More

Rig Make: Hydco Model: 70 Hours: 10,723 - Onboard Air Compressor - Rod Handler Truck Make: International Model: T-Line Year: 1985 KM's: 31,721 GVM: 26,500 kg Truck Mounted Drill Rig Location: Western Australia Learn More

Make: Toa-Tone Model: CSD-100B Year: 2014 Hours: 0 Sonic Head Location: Japan Learn More

Make: Caterpillar Model: 773G Year: 2014 Hours: 23,585 Idle Hours: 13,606 - New Tank - 3x Adjustable Rear Spray Heads - 2x Side Spray Heads - Hose Reel - Water Cannon - Top Fill Water Truck Location: United States of America Learn More

Unit #1 Make/Model: Custom Made Year: 1995 KM’s: 40,000 Power Pack Hours: 140 Engine: Mazda Diesel 4 Cylinder Dual Fixed Displacement Hydraulic Power Pack Dimensions; Length: 2.2 Metres Width: 1.1 Metres Height: 1.1 Metres Weight: 1,060 kg - Last Started July 2025 - No Batteries (24 Volt System) - Fixed Displacement Pump @ 32cc per rev with Working Pressure @ 2,500 PSI. - Fitted with a Piggy Back - Fixed Displacement Pump @ 11cc per rev with Working Pressure @ 2,500 PSI - All Safety Guards Available - Compliance Labelled - Gauges: Oil Pressure, Fuel Gauge, Hour Meter, Charge, Battery Isolation Lock Out, etc. - Emergency Stop Switch - Throttle - Key Start - Forklift Channels (Center Balanced) - Crane Lifting Eyes on Corners Unit #2 Make/Model: Custom Made Year: 1995 KM’s: Less than 40,000 Power Pack Hours: 51 Engine: Mazda Diesel 4 Cylinder Variable Displacement Hydraulic Power Pack Dimensions; Length: 2.2 Metres Width: 1.1 Metres Height: 1.1 Metres Weight: 1,060 kg - Last Started July 2025 - No Batteries (24 Volt System) - Fixed Displacement Pump @ 45cc per rev with Working Pressure @ 2,500 PSI. - All Safety Guards Available - Compliance Labelled - Gauges: Oil Pressure, Fuel Gauge, Hour Meter, Charge, Battery Isolation Lock Out, etc. - Emergency Stop Switch - Throttle - Key Start - Forklift Channels (Center Balanced) - Crane Lifting Eyes on Corners Quantity: 2 Skid Mounted Hydraulic Power Units Location: Queensland, Australia Learn More

Make: Sandvik Model: LH202 Year: 2020 Hours: 487 - CE Machine - Very Good Condition - EPA Tier 4 Narrow Vein Loader Location: Sweden Learn More

Make: SPX Flow Model: FRE50-125B G1 MQ1 Johnson - Self-Priming - Cast Iron Housing and Impeller Centrifugal Pump Location: New South Wales, Australia Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - Warman Clamps - Under Casing Clamps - Wireline and Main Winch - Rod Bin - Auger Carrying Rack at Front of Rig - Auto SPT - Silvan Pump - All New Suction and Hydraulic Hoses for Pump with Camlocks - 2x Mud Tanks (1,000 L & 500 L - Plastic) Down Hole Gear - 10x 3m PQ Rods Plus Shorts - 10x 3m HQ Rods Plus Shorts - 10x 3m NQ Rods Plus Shorts - 10x 3m Junior Mayhew Rods with Spanner Flats Plus 2x 1.5 m - 5x 100mm x 1.5m Augers Plus Bit & 20 Pins - 2x 1.5 NMLC Core Barrels - 6x NMLC Core Bits - 4x Impreg & 2x Surface Set - 40x Core Lifters / 6x Cases / 40x Stop Rings - 2x NMLC Reamers - 2x BQ Reamers - 3x BQ Core Bits - 2x 1.5m NQ3 Core Barrels - 2x Sets of Splits - 1x 3m NQ3 Core Barrel - 2x Locking Couplings - 2x Adaptor Couplings - Box of Barrel Spares - 1x HQ/NQ Overshot - 1x Set of PQ, HQ, NQ Inner Tube Wrenches - 10x 75mm Shelby Tubes Plus Drive Head - 10x 50mm Shelby Tubes Plus Drive Head - 2x SPT Samplers - 2x Pulling Plugs - 1x Spare Water Swivel Plus 2x Repair Kits - 1x Repair Kit for Rig Swivel - Many Subs to Facilitate all the Drilling Requirements - Stillsons - 2x 36" Inch, 2x 24" Inch & 2x 18" Inch - 1x Gas Mig Welder - 1x Honda 3.5 kVA Powered Generator - 1x PQ Birds Mouth for Water Return to Mud Tanks - 1x HQ Birds Mouth for Water Return to Mud Tanks - New Suction and Delivery Hoses - 1x 100mm Down Hole Hammer with 2x Bits 118mm *New* - 1x 75mm Down Hole Hammer with 2x Bits 95mm *New* Support Truck Make: Mitsubishi Model: Canter Year: 2009 Type: 4x4 - Hydraulic Hi-Ab Crane - 500 Litre Water Tank - 400 Litre Diesel Tank for Rig & 12 Volt Pump - 1x kVA Inverter - Wired so diesel pump won't engage until the switch is turned on in the locked tool box. - 1x Centrifugal Pump 1 1/2" Inch plus Suction and Delivery Hoses with Camlocks - 2x Tool Boxes - 1x Box of Hand Spanners & Sockets - Fitted Drill Rod Bins & Core Barrel Bins - Currently Registered until May 2025 Tracked Mounted Drill Rig Support Truck + Down Hole Gear Package Location: New South Wales, Australia Learn More