Search results for: 'size high drill bit'

Drill Rig Make: Boart Longyear Model: LF160C Year: 2020 Installed Power: 194 kW Working Pressure: 380 bar Head Torque: 665 I / 90 II daNm Head Rotation: 250 I / 1,050 II RPM Feed Force: 7,000 daN Retract Force: 17,000 daN Feed Length: 7,200 mm Tracks Make: Strickland Track Mounted Drill Rig Location: Queensland, Australia Learn More

Drill Rig Make: Boart Longyear Model: LF160C Year: 2022 Installed Power: 194 kW Working Pressure: 380 bar Head Torque: 665 I / 90 II daNm Head Rotation: 250 I / 1,050 II RPM Feed Force: 7,000 daN Retract Force: 17,000 daN Feed Length: 7,200 mm Tracks Make: Strickland Model: 6000428 Year: 2022 Track Mounted Drill Rig Location: Queensland, Australia Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - Warman Clamps - Under Casing Clamps - Wireline and Main Winch - Rod Bin - Auger Carrying Rack at Front of Rig - Auto SPT - Silvan Pump - All New Suction and Hydraulic Hoses for Pump with Camlocks - 2x Mud Tanks (1,000 L & 500 L - Plastic) Down Hole Gear - 10x 3m PQ Rods Plus Shorts - 10x 3m HQ Rods Plus Shorts - 10x 3m NQ Rods Plus Shorts - 10x 3m Junior Mayhew Rods with Spanner Flats Plus 2x 1.5 m - 5x 100mm x 1.5m Augers Plus Bit & 20 Pins - 2x 1.5 NMLC Core Barrels - 6x NMLC Core Bits - 4x Impreg & 2x Surface Set - 40x Core Lifters / 6x Cases / 40x Stop Rings - 2x NMLC Reamers - 2x BQ Reamers - 3x BQ Core Bits - 2x 1.5m NQ3 Core Barrels - 2x Sets of Splits - 1x 3m NQ3 Core Barrel - 2x Locking Couplings - 2x Adaptor Couplings - Box of Barrel Spares - 1x HQ/NQ Overshot - 1x Set of PQ, HQ, NQ Inner Tube Wrenches - 10x 75mm Shelby Tubes Plus Drive Head - 10x 50mm Shelby Tubes Plus Drive Head - 2x SPT Samplers - 2x Pulling Plugs - 1x Spare Water Swivel Plus 2x Repair Kits - 1x Repair Kit for Rig Swivel - Many Subs to Facilitate all the Drilling Requirements - Stillsons - 2x 36" Inch, 2x 24" Inch & 2x 18" Inch - 1x Gas Mig Welder - 1x Honda 3.5 kVA Powered Generator - 1x PQ Birds Mouth for Water Return to Mud Tanks - 1x HQ Birds Mouth for Water Return to Mud Tanks - New Suction and Delivery Hoses - 1x 100mm Down Hole Hammer with 2x Bits 118mm *New* - 1x 75mm Down Hole Hammer with 2x Bits 95mm *New* Support Truck Make: Mitsubishi Model: Canter Year: 2009 Type: 4x4 - Hydraulic Hi-Ab Crane - 500 Litre Water Tank - 400 Litre Diesel Tank for Rig & 12 Volt Pump - 1x kVA Inverter - Wired so diesel pump won't engage until the switch is turned on in the locked tool box. - 1x Centrifugal Pump 1 1/2" Inch plus Suction and Delivery Hoses with Camlocks - 2x Tool Boxes - 1x Box of Hand Spanners & Sockets - Fitted Drill Rod Bins & Core Barrel Bins - Currently Registered until May 2025 Tracked Mounted Drill Rig Support Truck + Down Hole Gear Package Location: New South Wales, Australia Learn More

Make: Drill Techniques Model: GM-2GI Year: 2020 Height: 3.5 Metres Tare: 4,000 kg Hydraulic Jack Up Grout Unit Location: New South Wales, Australia Learn More

Make: Drill Techniques Model: GM-2GI Year: 2020 Height: 3.5 Metres Tare: 4,000 kg Hydraulic Jack Up Grout Unit Location: New South Wales, Australia Learn More

Type: 6 5/8" Inch Fullhole Length: 9 Metre Quantity: 10 approx. Drill Rods / Pipe Location: New South Wales, Australia Learn More

Make: Brevini Year: 2017 Hours: 0 (Complete Overhaul in June 2025) Weight: 1,650 kg - All Hydraulics and Electrics have been fully re-conditioned - 55kW Electric Motor driving a hydraulic pump, which in turn drives a reciprocating high pressure water pump with a maximum output of 90L/min of water at 180 Bar pressure. - The complete pump system has been designed to run continuously and all equipment is housed within a fully enclosed cover. - As the motor drives a hydraulic pump, the high pressure water output is fully adjustable while the motor runs at a constant speed, unlike a high pressure water pump that is direct driven by a fixed speed electric motor. Additionally, because the hydraulic circuit incorporates an unloader valve, it is possible to switch the high pressure water on and off without the need to stop the motor or bypass high pressure water into a holding tank. - The hydraulics system is of robust construction containing 300L of oil and an integrated oil cooler. - The system can also be used as a 55 kW hydraulic power pack. Skid Mounted Pump Location: Queensland, Australia Learn More

Make: Remet Size: 4" Inch Length: 3 Metres Quantity: 54 - RC - With Inner Tubes Drill Pipe Location: Queensland, Australia Learn More

Air Core Drill Rig - New Comp Rotation Head - Deck Engine - Main Feed Ram - Radiator Hydraulic Pump - Tilting Rod Bin - Onboard Air Compressor Hours: 100 Approx. Compressor Capacity: 600 CFM / 230 PSI - Cradle for Cyclone Pump points for Booster Bean Pump - Dump Mast - Has been water boring for the last 5 years - Too many spares to list Truck Make: Hino Model: GT Year: 2014 KM's: 64,000 Type: 4x4 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Gardner Denver Model: SCH2500 Year: 1990 approx. Engine: Cummins 6 BTA 5.9 Serial Number: 2711468 - Includes Drill Rods and Sampling Equipment Complete Overhaul; - Hammer HPRI - New Head Injectors on Fuel Pump - Track and Final Drives - Oil Cooler Replaced with CAT Cooler and mounted on left hand side Hydratrack Track Mounted Blast Hole Drill Rig Location: Queensland, Australia Learn More

Sizes: 3" Inch / 4" Inch / 5" Inch Working Pressure: 2,500 PSI - Basic Hard Shut in Nitrile Bladder - Wireline Stripper - Hydraulic Activator - Hand Pump Activator - All Hoses Burst Protection or Fire Protected - Zone One Hoses are Coflexip and Armour Plated - Casing Adaptor to be purchased Annular Diverter Location: Queensland, Australia Learn More

- Fully Hydraulically Operated - No Electrics - Various API Screen Sizes available - 600 GPM Jack Up Rod Sloop Mounted Shale Shaker Location: Queensland, Australia Learn More

Make: G&K Model: 850 Engine: Caterpillar CAT 3208 (Rebuilt) Hours: 200 approx. - Replaced Extensive Hydraulic Hoses - Bean Pump on deck - 72 Metres of 4" Inch Waterbore Drill Pipe, comes with Head Tubes and Air Swivel Lots of Spares; - 2x Spare Heads -2x Spare Winches -1x Spare Wireline Drilling Capacity; 12" Inch Hole: Approx. 200 + Metres NQ: 800 Metres HQ: 600 Metres Truck Mounted Waterbore / Diamond Drill Rig Location: Victoria, Australia Learn More

Rig Make: UDR Model: 650 Onboard Compressor: Sullair 1,150 CFM / 350 PSI Air Compressor - Set up for Waterbores, RC and Aircore - Table opens up to allow 14” inch casing or bit - Recent major service of Air End, Separator Filter & New Oil - New Head Slides - New Jib Ram - New Pull Down Ropes - Head Serviced Includes; - Cyclone & Splitter - New Bull Hose - 25x Used 4” Inch RC Rods with Inner Tubes - 2x Head Tubes - Air RC Swivel - Mud Rotary Swivel - Hydraulic Breakout Arm - 4” Inch Airdrill RC Hammer (in Good Condition) & 2x Hammer Tubes - 7x 5” Inch Hammer Bits (Used) - 1x 4” Inch Back Hammer - 1x 8” Inch Aircore Bit - 4” Inch Aircore Bits (2x New & 3x Used) - Blow Up Sub - 1x 4 ½” Inch PDC Bit - 6” Inch Casing Elevator Set - Diverter Box with 20x Rubbers - Stuffing Box - Rod Spanner to suit - Dig Out Sub Rig Truck Make: Volvo Year: 2012 - Twin Steer Option 1 – Water Bore Drilling Equipment (Additional $15,400 ex GST) - 12” Inch Blade Bit (Near New) - 7 7/8” Inch Blade Bit - 8” Inch Tri-Cone Med Formation (Near New) - 6” Inch Shreps Hammer with 6” Inch & 8” Inch Bits (New) - Adaptor Subs to suit - Rod Spanners to suit - Casing Elevators Option 2 – RC Rods (Additional $55,000 ex GST) - 180 Metres of RC 4” Inch Remet Rod String (New) Option 3 – Hooklift Truck + Bins ($55,000 ex GST) Truck Make: Isuzu Year: 2000 - Hooklift Truck Bins; 1st Bin: 6x5 Gardner Denver Mud Pump with Perkins Engine 2nd Bin: To carry PVC and Gravel 3rd Bin: To carry Water Suttles Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Atlas Copco Model: PowerROC T35 Year: 2011 Hours: 4,919 - Hydraulic Track Mounted Crawler Drill Rig Location: Victoria, Australia Learn More

Rig Make: Mayhew Model: 1000 Hours: 16,000 Rig Truck Make: Mack Model: Quantum Year: 2005 KM's: 750,000 Includes; - Onboard Sullair 350/750 Air Compressor (Low Hour) - Onboard 5/4 Mud Pump - 4 Pot Bean Pump - GD 2000 Table - Mayhew 1000 Draw Works - 4 Long Stroke Jacks - All Powered off Truck Engine - All Variable Speed Hydraulic Drive - Isolators - Mine Spec - Excellent Tyres - Air Conditioning - 2 UHF Radio - Jump Start - E Stop - Isolators - Plastic Rollover Guards - Good Rubber Skirting Under Table - 2 Tool Boxes - Fire Extinguisher - All service records available - Rig has had extensive rebuilds every second year Support Truck Make: Volvo Model: FL10 Year: 1995 Includes; - Holds 6,500 L of Water - Jump Start, E Stop, Isolators - Ample Toolboxes, Storage - Slide Out Safety Rails - Storage on Top of Water Tank - Spare Tyre Tracks - All New Paint - New Drive Tyres, Steer Good Tyres - Certified ROPS - Air Conditioning - UHF Radios - Fire Extinguisher - Hydraulic Water Pump - Can hold 90 m 5" Inch PVC & Plenty of Rods Compressor Make: Sullair Model: 350/1100 or 500/900 Year: 2006 Hours: 2,000 - Computerised CAT C15 Manual Sullair Control System - Split Intercooler & Compressor Oil Cooler Mounting - Cabinet Braces - Receiver Bracing - Remote E Stop - Jump Start Receptacle - Isolators, Mine Spec - Connected to 4,000 L Diesel Fuel Tank underneath (Can pump diesel out of bulk tank) Truck Mounted Drill Rig & Support Truck Package Location: Queensland, Australia Learn More

Make: Tracto Model: 18ACS Year: 2014 Hours: 2,992 - 9x Rod Boxes of TD82 Dirt - 12x Rod Boxes of D95 Rock Rods - 2x Rock Motors - Reamers Including Rock and Dirt - Cross Over from Tracto to API Reg Thread - Various Spare Parts - Breakout Tool Track Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Drill Doctors Part Number: 412749 Year: 2024 - Hydraulic Operated Breakout Wrench Location: New South Wales, Australia Learn More

Drill Rig Hours: 250 - Used for Geotechnical Drilling - Can drill up to 4 metres using the extendable drill rig bits Carrier/Vehicle Make: Toyota Model: Landcruiser Year: 2012 KM's: 142,181 Carrier/Vehicle Mounted Drill Rig Location: Western Australia Learn More

Make: Sandvik Drilltech Model: D75KS Engine: Caterpillar CAT 3412 - 2 x Rotation Heads (One still on mast) - Complete Mast (New Generation) - Air End - Air Receiver - Newly Rebuilt Drifter Track Mounted Rotary Blast Hole Drill Rig Location: Northern Territory, Australia Learn More