Search results for: 'wheel to loader for remot for size'
- Related search terms
- wheel to lock for rent for sale
- wheel to loader for rent for sale
- size we enabled rated in bits
- size we enabled rate in bros
- size we enabled rate in bore
-
Custom 600 RRD Track Mounted Drill Rig (POA) (sale-ehub3428)For Sale$0.00Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Home Made
LOCATION Canada
MODEL 600 RRD
-
20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3420)For HireTray Length: 12 m (Not Including Power Pack) Width: 3.2 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3419)For HireTray Length: 10 m (Not Including Power Pack) Width: 2.5 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
6x Sandvik DR560/80 Track Mounted Contour DTH Drill Rigs (FOR HIRE/RENT - POA) (hire-ehub3356)For HireMake: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn MoreMachine hours Various
KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL DR560/80
-
2015 Rebuilt Dino 250 Track Mounted Drill Rig + Drill Trailer Workshop (POA) (sale-ehub3352)For Sale$0.00Model: Dino 250 Year: 2015 (Rebuilt) Hours: 7,119 Engine: Caterpillar CAT 3412 (Rebuilt) Includes; - Complete set of Drill Rods (200 Metres) - Drill Schematics and Parts List - Complete Service and Works History - All Serial # for Onboard Assets - Onboard Dry Element Dust Suppression Unit - Auto Fire Suppression - Hand Free AUSTEX Break Outs - Onboard Rod Handler - Onboard Rod Storage (150 Metres) - Haul Winch - Wireline Winch (350 Metres) - Remote Wireless Tramming Controls - New Metzke Rotating Splitter - Funk Box Drive - Danfoss and Rexroth Hydraulic Pumps Air Compressor Make: Sullair 900 CFM / 350 PSI - Refurbished Booster Make: Detroit Model: 6V92 Hours: 0 - Rebuilt Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 7,119
KILOMETERS N/A YEAR 2015
BRAND N/A
LOCATION Western Australia
MODEL Dino 250
-
Various Hose Restraints, Cable Stockings, Safety Shackles & Cambuckles / Hose Straps (POA) (sale-ehub3284)For Sale$0.00*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL See Description for Sizes
-
Wireline Winch & Crown Wheel Assembly ($7,500 ex GST) (sale-ehub3250)For Sale$7,500.00Wireline Cable: 1,000 m + - Hydraulic Motor - Double Sheave Wheel - Assembly for High Tonnage Winch - Top of Mast Assembly Design Wireline Winch Crown Wheel Assembly Location: Victoria, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Victoria, Australia
MODEL N/A
-
Atlas Copco Air End (Open to Offers) (sale-ehub3220)For Sale$0.00Make / Model: Atlas Copco Size: Unknown Condition: Unknown Air End Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION Western Australia
MODEL Atlas Copco
-
2x Custom Built Track Bases with Hitachi EX120-2/3 Tracks ($55,000 ex GST each) (sale-ehu3167)For Sale$55,000.00Make / Model: Custom Built - Gross Funk Remote Control Units Fitted - Hydraulic Couplings for rig attachment - Hitachi EX120-2/3 Tracks Track Base Location: 1x Queensland, Australia & 1x Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Home Made
LOCATION Queensland, Australia & Western Australia
MODEL Custom Built
-
Jules Weber Conventional Wheel Mounted Drill Rig ($110,000 ex GST) (sale-ehub3096)For Sale$110,000.00Make / Model: Jules Weber Hours: 3,757 - Bowen Power Swivel / Top Drive - Bourne Draw Works with 18,000 lbs single line pull - 6 Line Travelling Block for a maximum 108,000 lbs hoist - Has drilled down to 900 m a number of times Conventional Wheel Mounted Drill Rig Location: Victoria, Australia Learn MoreMachine hours 3,757
KILOMETERS N/A YEAR N/A BRAND Jules Weber
LOCATION Victoria, Australia
MODEL Jules Weber
-
FMC L1622HV Triplex Bean Skid Mounted Mud Pumps (POA) (sale-ehub3076)For Sale$0.00Make: FMC Model: L1622HV Triplex Pressure: Maximum 1500 PSI - Minimum 100 PSI Fluids Used: Various grades of muds & water - This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 PSI. - The pump skid weighs only 2450 kg (wet) and only covers an area of 2.4 m x 1.92 m making it very easy to move into restricted areas due to its compact abilities. - Because of its limited size it makes it very easy to transport to various locations. - The pump skid is compact yet practical to access any part of the pumps. Skid Mounted Bean Mud Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION Queensland, Australia
MODEL L1622HV
-
2017 Atlas Copco XRVS 1050 Wheel Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3025)For HireMake: Atlas Copco Model: XRVS 1050 Year: 2017 Hours: 816 Wheel Mounted Air Compressor Location: New South Wales, Australia Learn MoreMachine hours 816
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL XRVS 1050
-
2 Sets x 8 5/8" Inch - 9" Inch Tongs ($9,500 ex GST) (sale-ehub2006)For Sale$9,500.00Tongs Size: 8 5/8" Inch - 9" Inch - Free and working Quantity: 2 Sets Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 8 5/8" Inch - 9" Inch
-
Bobcat 730S Backhoe Skid Steer Loader Attachment ($4,000 ex GST) (sale-ehub2000)For Sale$4,000.00Make: Bobcat Model: 730S Attachment Backhoe Skid Steer Loader Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Bobcat
LOCATION Queensland, Australia
MODEL 730S
-
Sandvik G88 Excavator Hammer (POA) (sale-ehub1992)For Sale$0.00Make: Sandvik Model: G88 Between Ears: 420 mm Pin Size: 100 mm Pin Centres: 590 mm Excavator Hammer Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL G88
-
Project Industries Stemming Bucket to Suit Caterpillar 930H Wheel Loader (POA) (sale-ehub1989)For Sale$0.00Make / Model: Project Industries Stemming Bucket Suiting Caterpillar 930H Wheel Loader Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Project Industries
LOCATION Western Australia
MODEL Project Industries
-
Humpy Site Office / Workshop Trailers (POA) (sale-ehub1893)For Sale$0.00Specifications; - 50 mm Tow-Ball Coupling & Dual Safety Chains - 50 mm Solid Square Axles - 9 Leaf Load Share Suspension - 12" Inch Electric Brakes - Electric Breakaway Unit - LED Tail, Indicator and Marker Lights - 15" Inch Sunraiser Wheels with 8 Ply Light Truck Tyres - 2 x Spare Wheels - 4 x Adjustable Stabiliser Legs Dimensions; Transport Width: 2.45 m Transport Height: 3.0 m Transport Length: 5.5 m Capacities; - Tare Weight: 2,500 kg to 2,750 kg - ATM: 3,500 kg Functions & Features; - Pigeonholes and under-bench tool storage - 125 mm Multipurpose Vice - Tooling and Hard Hat Hooks - 1 x Personal Access Door - Microwave - Fridge - Storage Cabinets - 5.5 kW Diesel Generator - 4 x Double Power Point GPO 10 AMP - 3.5 kW Daiken Split System Air Conditioner - Water Tank & Hand Wash Station - 8 x 12V/24V LED External Lights - 2 x 240v LED Internal Lighting - Retractable Awning - Dual Wheel Chocks Options; - Open Layout - Open plan full walkthrough - Split Layout - Separate workshop and office Roof mounted AC Unit (Domestic IBIS 4) Two-piece Rear Door 8.0 kW Diesel Generator Humpty Site Office / Workshop Trailers Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
2019 Elastec 770 770 CFM Pulling Vacuum Spill Trailer ($KES13,800,000) (sale-ehub1773)For Sale$0.00Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn MoreMachine hours Less than 250
KILOMETERS Less than 1,000
YEAR 2019
BRAND Elastec
LOCATION Nakuru, Kenya
MODEL 770
-
2008 Atlas Copco ROC D9C Blast Hole Track Mounted Drill Rig ($117,500 ex GST) (sale-ehub1722)For Sale$117,500.00Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 12,000 - 13,000
KILOMETERS N/A YEAR 2008
BRAND Atlas Copco
LOCATION Queensland, Australia
MODEL ROC D9C
-
1981 Kelsey Hayes Fabco TC140 Transfer Case ($2,750 ex GST) (sale-ehub1640)For Sale$2,750.00Make: Kelsey Hayes Fabco Model: TC140 Year: 1981 Serial No: 525F81 Fabco No: 872091003 Condition: Excellent Working Order *Suits all wheel drive Kenworth, Mack, White or American trucks* Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 1981
BRAND Kelsey Hayes Fabco
LOCATION Western Australia
MODEL TC140
Filter