Search results for: 'base gener high for size'

Rig Make: Edson Model: 8000 Year: 1993 Hours: 4,600 Engine: Cummins 855 @ 300 HP Deck Engine Mast: 11.5 m Pullback: 16 Tonne Stroke: 7 m Includes; - Dump Mast & Sliding Base - 13 Tonne Winch - 9 m Rod Pull - Head Side Rack - 2 Tonne Wireline Winch - Dual W1122 Bean Pumps - Foot Clamps - Overshot - Burst Protection on Hosing - E-Stops - Has Fire Suppression System Installed (Out of date) Rig Truck Make / Model: International Engine: Cummins 855 @ 400 HP Type: 8x4 - Road Ranger Box Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn More

Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn More

Drill Rig Frame / Base Make: Sandvik Model: UDR1000 Bare Mast Make: Sandvik Model: UDR1000 Bare Mast New Slides Sand Blasted & Painted Condition: Excellent Truck (Available additional option for $25,000 ex GST) Make: MAN Model: 41-403 Year: 1998 Rig Carrier Location: New South Wales, Australia Learn More

Down Hole Bits Type / Size: 127 mm Quantity: 15 *New* Location: Northern Territory Learn More

Make/Model: DW400C Year: New (2022) Machine Hours: 0 Engine: Cummins 6LTAA8.9 @ 360 HP Includes: - Sauer Danfoss Load Sensed Piston Pumps - Sauer Danfoss PVG Valves - 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque - Sliding Head - Tilting Head - Floating Spindle with 2.5" Waterway - 25 Tonne Pullback - Dump Mast (Long Stroke) - 20" Inch Diameter Through the Work Table - Breakout Ram - 8 7.5" Inch Mud Pump (Made in India) - 10 Tonne Single Pull Winch Mounted on Top of Mast - Manuli Hoses on All High Pressure Lines - 4 x Enclosed Outriggers - Can extend for ease of loading onto a lowbed trailer *Can easily be converted to RC due to the large thru-hole in the rotation head* *Can be delivered on rails for mounting onto any truck* Location: Philippines Learn More

Make: Oilwell Model: Duplex 214-P Year: 2007 Hours: Low Dimensions (L x W x H): 5440 mm x 2750 mm 2200 mm Weight: 16.16 T Engine: Mercedes Engine Model: OM457LA Power: 422 HP / 315 kW RPM: 1800 Max Torque: 2000 Nm @ 1200 RPM 7 1/2 x 14 Liner Sizes from 5 1/2 to 7 1/4 Max Pressure 5 1/2" Liner: 1875 PSI @ 345 Gallons / min Max Volume 7 1/4" Liner: 765 PSI @ 620 Gallons / min Self-Contained Skid with 350L Diesel Tank Care and Operation Manual available w/ Full Specifications Condition: Good Location: Queensland, Australia Learn More

Drill Rig Make: Bourne Model: 2000 TDH-NT Truck 6x4 Crane Carrier 12v 1992 GM Powers Truck & Hydraulics 6 Speed Alison Automatic Drives Truck (High & Low Range) Rod Handler 5 1/2" x 8 Bourne Mud Pumps on Board Location: Western Australia Learn More

*BRAND NEW* 4x HQ3 S/S Diamond Tip Core Bit 5 & 7 Step 5 Step: Diamond Size: 30/40 SPC Grade AA Carat WT: 22 CTS Face Discharge: 8 Water Discharge 10 mm x 4 mm Core DIA: 63.5 mm Bit OD: 95.6 mm Standard Thread Information on 7 Step Bit coming soon, or please contact us if you would like the information ASAP. Location: Australia Learn More

P-Size Wireline Size: PWL / PQ / PQ3 Year: 2022 Core Diameter: 65-86 mm Core Capacity: 3x1 m Dimensions: L - 107 cm / W - 34 cm / H - 10 cm Weight: 1.9 kg Weight w/ Cover: 2.9 kg Pallet Capacity: 175 pcs H-Size Wireline Size: HWL / HQ / HQ3 Core Diameter: 49 - 64 mm Core Capacity: 4x1 m Dimensions: L - 107 cm / W - 34 cm / H - 8 cm Weight: 1.9 kg Weight w/ Cover: 2.9 kg Pallet Capacity: 175 pcs N-Size Wireline Size: NWL / NQ / NQ3 Core Diameter: 37 - 48 mm Core Capacity: 5x1 m Dimensions: L - 107 cm / W - 34 cm / H - 6 cm Weight: 1.8 kg Weight w/ Cover: 2.8 kg Pallet Capacity: 270 pcs Location: Turkey Learn More

Various Sizes Towable Water Tanks 2015 Model Tare: 480 kg Type: Water Cab VIN: 6T9T23WAIFOMW0023 Learn More

Total tank capacity: 79.5kL (500BBL) Road trainable Full-size submarine access door into tank Ladder accessible viewing platform to observe inflows and fluid heights Sight glass fluid level indicator Sunken suction sump with strainer grate Rugged 200 x 100 RHS perimeter frame 6mm crimped walls, 10mm floors Tandem axle, leaf spring suspension Internal surfaces coated with corrosion resistant paint *For any additional information, please contact us* Learn More

TWT1250-30F 1250CFM/435 PSI Two-Stage Mobile Rotary Screw Air Compressor Specification TWT1250D-30F FAD:35.5m³/min Normal Working Pressure: 30 Bar Screw Oil Capacity: 165L Diesel Engine Sweden VOLVO Engine Model: TAD1650VE-B Rated Power: 405KW Rated Speed/Idle Speed: 1800/1350 Cylinder: 6 Bore: 144mm Stroke: 165mm Compression Ratio: 17.0:1 Displacement: 16.1 Emission Level: EU III/ Tier 3 Battery: 24V Fuel Tank Capacity: 1,000 L Connector Size: G3/4”x1,G 2”X1 Tire Size: 7.5R16 X4 Weight: 6,500kgs Dimension: 5358 x 2200 x 2585 mm Condition: New Location: China Learn More

TWT1250-24T 1250CFM/350 PSI Two-Stage Mobile Rotary Screw Air Compressor Specification TWT1250D-24T FAD:35.5m³/min Normal Working Pressure:24~25 Bar Screw Oil Capacity:165L Diesel Engine Sweden VOLVO Engine model:TAD1650VE-B Rated Power:405KW Rated Speed/Idle Speed:1800/1350 Cylinder:6 Bore:144mm Stroke:165mm Compression Ratio:17.0:1 Displacement:16.1 Emission Level:EU III/ Tier 3 Battery:24V Fuel Tank Capacity:1000 L Connector Size:G3/4”x1,G 2”X1 Tire Size:7.5R16 X4 Weight:6500kgs Dimension:5358x2200x2585mm Condition: New $USD103,000.00 Learn More

TWT1133-24T 1133CFM/350 PSI Two-Stage Mobile Rotary Screw Air Compressor Specification TWT1133D-24T FAD:32m³/min Normal Working Pressure: 24~25 Bar Screw Oil Capacity: 140L Diesel Engine Sweden VOLVO Engine Model: TAD1353VE Rated Power: 345KW Rated Speed/Idle Speed: 1850/1300 Cylinder: 6 Bore: 131mm Stroke: 158mm Compression Ratio: 17.1:1 Displacement: 12.8 Emission Level: EU III/ Tier 3 Battery: 24V Fuel Tank Capacity: 720 L Connector Size: G3/4”x1,G 2”X1 Tire Size: 7.5R16 X4 Weight: 6,500kgs Dimension: 4885 x2100 x 2585 mm Condition: New Location: China Learn More

FOR HIRE/RENT - Tracked Compressor/Booster Package - Keypower 6V92 1400cfm 700PSI Booster - Atlas Copco XRVS1000cfm 350PSI - Remote controlled, self-propelled track base - Condition: Excellent Learn More

Make: TLB Model: 60t, 80t, 120t, 150t Year: 2022 TLB Hydraulic Casing Pullers TLB-60t, $AUD9,000 ex GST TLB-80t, $AUD9,350 ex GST TLB-120t, $AUD10,100 ex GST TLB-150t, $AUD10,800 ex GST Max pulling capacity: 80-100 tons Pulling Stroke: 500mm System pressure: 28mpa Flow rate: 14.4l/min Rod/casing dia: 50-194mm Power of electric motor: 11kw Over size: 300cmX650cmX450cm Weight: 300kg Max pulling capacity: 120-150 tons Pulling Stroke: 500mm System pressure: 31.5mpa Flow rate: 14.4l/min Rod/casing dia: 50-300mm Power of electric motor: 11kw Over size: 750cmX650cmX450cm Weight: 400kg Location: China Learn More

Make: Lao Ma Si Te Model: LGF 500 Year: 2018 Rated input power 370kW（500HP） Rated strokes 165 SPM Stroke length 191mm（7.5″） Gear ratio 4.286∶1 Valve chamber size API 5# Liner ID 170mm Rated WP 9.3MPa Suction connection size 203mm（8″） Discharge connection size 4″flange 35MPa Pinion shaft diameter 139.7 mm（5 1/2″） Keys 31.75×31.75mm（1 1/4″×1 1/4″） Outline 3685×2709×1543mm（145″×106 5/8″×60 3/4″） weight 9770kg（21539Ib） Mud Pump Location: China Learn More

Make: Cortech Model: CSD1300L CSD1300L core drilling rig is specially designed for diamond core drilling. Track crawler mounted rig facilitates moving around with great convenience. Robust structure plus strong power supply ensures high penetration rate and outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 1,300m 1,000m 700m 400m Hydraulic System Pressure 26MPa Cooling Air Cooled Power System Model Cummins 6BTA5.9 –C180 Type Turbo Charged Power 132KW Engine RPM 2,500rpm Drill Head Max Torque 4,257Nm Max Rotation ,RPM 1,182rpm Feed Stroke 3.5m Max Inside Diameter 117mm Max Pull / Max Push 127KN/ 50KN Main Winch Max Pull 68KN Pulling Speed 28m/min Rope Diameter 16mm Rope Length 30m Wireline Winch Max Pull 11KN(bare drum) Pulling Speed 120m/min Rope Diameter 6.6mm Rope Length 1,000m Mast Length 10m Drilling Angle 45°-90° Dump Length 1.1m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 5,100×2,350×2,600mm Total Weight: 8.5t Diamond Coring Drill Rig Location: China Learn More

Make: Cortech Model: CSD3000 CSD3000 core drilling rig is specially designed for diamond core drilling. It provides precise control on the drilling capacity. The drill head is designed to slide and dump, together with the full angle rotation structure for drill mast, it effectively reduces manual inputs and improves efficiency. The hydraulic legs are stretchable, which broaden the bearing surface, and ensure outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • 9 meters rod pulling largely improves drilling efficiency due to rod collection frame design on mast • The design of side shift by hydraulic of rotation head largely reduces working tensions and guarantees personnel safety • Multi-pressure gauge reads real time pressures for kinds of major components • High/low speed control of main winch largely meets speed requirements for rods handling • Stepless control of mud pump flow facilitates various drilling needs for mud • telescopic mast greatly reduces working tensions and improves drilling efficiency. • Horizontal extension of jack legs guarantees firm rig standing on the ground. • Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • Independent tramming cab set in front provides full view for easy rig walking and driver’s safety • Mast dumping guarantees perfect stability during drilling; • Independent hydraulic jacks facilities leveling of the rig; • Great convenience of control of feed pressure; • Standardized parts and components make maintenance and repairing easy; • Real time reading of drilling data on gauges on the control panel; • Mud pump and mixer powered by the rig’s hydraulic system, controlled directly on the rig’s panel; • Top grade hydraulics of European origin; • Experienced engineers plus adequate spare parts ready to provide full service. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 3,000m 2,300m 1,600m 1,050m Hydraulic System Pressure 28MPa Cooling Air Cooled Power System Model Cummins 6LTAA8.9-C325 Type Turbo Charged Power 239KW Engine RPM 2,200rpm Drill Head Max Torque 8,170Nm Max Rotation ,RPM 1,250rpm Feed Stroke 3,450mm Max Inside Diameter 117mm Max Pull /Max Push 250KN/110KN Main Winch Max Pull 181.44KN Pulling Speed Low:33m/min High:70m/min Rope Diameter 24mm Rope Length 41m Wireline Winch Max Pull 18KN(bare drum) Pulling Speed 150m/min(bare drum) Rope Diameter 6.6mm Rope Length 2,500m Mast Length 11.2-13.7m Drilling Angle 45°-90° Dump Length 1.4m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 11,240×2,310×3,330mm Total Weight 23.5t Diamond Coring Drill Rig Location: China Learn More