Search results for: 'high for size dump creek punta good fl'

Model: FH2000 Engine: Caterpillar CAT C7.1 Electronic @ 205 kW (275 HP) Pull Back: 280 kN (62,900 lbf) Limited Speed 244.8 kN (55,033 lbf) Full Speed Pull Down: 115 kN (25,853 lbf) Water Pump Options; - Standard FMC W1122BCD 140 lpm @ 1,000 psi - FMC L11-18SC 265 lpm @ 1,800 psi Depth Capacity; NQ Core: 2,030 m HQ Core: 1,377 m Open Hole 3 1/2" Inch Rods: 900 m RC 4 1/2" Inch: 600 m (Nominal) Traverse Speed; Up: 50 m/min (164 ft/min) Down: 39 m/min (128 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 14,324 Nm (10,564 ft/lb) in low gear - 0-1,500 RPM Speed Range - Bosch Rexroth A6VM160 Variable Displacement Motor - High Gear 3:1 & Low Gear 19.57:1 ratios - Adjustable Rotation Torque Control - Infinitely Variable Rotation Speed Control - Floating Spindle 3 1/2" Inch API IF Pin Thread - Pressure Lube Bearings and Gears with filtered and cooled lubrication oil system Main Winch; - Maximum Pull: 156 kN (35,048 lbf) - 120 m/min (394 ft/min) - Mast Top Mounted - Electronic Winch Travel - Fail to safe - 28 mm Main Winch Rope - Safety Factor 3.35:1 (exceeds BS/EN791) - 1x Bosch Rexroth A6VM160 Variable Displacement Motors - 1x Brevini Planetary Reduction Gear Boxes - 1x Multi Disc Brake Units - Fail Safe Spring Activated - Hydraulic Pressure Release Wireline Winch; - Mast Mounted - Maximum Pull: 25 kN (5,617 lbf) - Rope Capacity: 2,100 Metres x 8 mm Rope - Adjustable Position Wireline Spooler - Maximum Speed: 450 m/min (1,476 ft/min) - Adjustable Pull Limiter - Safety Stop System - Wireline Depth Counter as an option New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Model: FH1300 Engine: Caterpillar CAT C7.1 Electronic @ 187 kW (250 HP) Pull Back: 115 kN (25,853 lbf) Actual Pull Down: 70 kN (15,736 lbf) Water Pump Options; - Standard FMC W1122BCD 140 lpm @ 1,000 psi - FMC L11-18SC 265 lpm @ 1,800 psi Depth Capacity; NQ Core: 1,300 m HQ Core: 885 m Open Hole 3 1/2" Inch Rods: 380 m RC 4 1/2" Inch: 220 m (Nominal) Traverse Speed; Up: 60 m/min (196.8 ft/min) Down: 56 m/min (183.7 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 8,087 Nm (6,111 ft/lb) in low gear - 0-1,500 RPM Speed Range - Two Speed Gearbox - High Gear 3.04:1 & Low Gear 12.61:1 ratios - Variable Displacement 160cc Hydraulic Motor - Adjustable Rotation Torque Control - Infinitely Variable Rotation Speed Control - Floating Spindle 3 1/2" Inch API IF Pin Thread - Pressure Lube System with Cooler and Filter Main Winch; - Maximum Pull: 100 kN (10,000 lbf) - 120 m/min (393 ft/min) - Mast Top Mounted - Electronic Winch Travel - Fail to safe - Main Winch Rope - Safety Factor to Meet BS/EN791 - Planetary Reduction Gear Box & Brake - Variable Displacement Hydraulic Motor Drive Wireline Winch; - Deck Mounted - Maximum Pull: 15 kN (3,372 lbf) - Rope Capacity: 1,400 Metres x 6 mm Rope - Adjustable Position Wireline Spooler - Maximum Speed: 450 m/min (1,476 ft/min) - Adjustable Pull Limiter - Safety Stop System - Wireline Depth Counter as an option New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Model: 1750 Scout Engine: Perkins Diesel Torque: 2,500 Nm at 205 bar and 110 RPM Stroke: 1.75 m Pull-Out / Pull-Down: 1,100 kg Capacity (Guide Only): NQ - 60 m / 4" Inch Open Hole - 30 m / 3 1/2" Inch Auger - 15 m - Custom Toyota 33220 Tray - Direct Dive Auger Head with High Torque Head Motor and Fittings - Fine Feed Control - Auger Drive Sub (1 1/8" Inch Hex) - RHS Mast - Tilt Frame for Vehicle/Trailer Mounting - Hydraulic Tilt - Heavy Duty Pull-Down Chain - Nylon Idler Rollers - Standard Auger Guide - Standard Control Panel - Hydraulic Operation - Rain Hood for Motor & Lockable Cage for Spare Wheel & Motor - Remove Throttle and Stop - Water Filter for Fuel / Water Separation - Light Guard for Augers 500 mm to 1,800 mm - Oil Cooler - Simple Rack for Augers Options for Drill; - Hollow Spindle Head and Tooling for Fluid Drilling - 2 Levelling Jacks for Tray Mount Drills - Tilting Rack for Augers - Alternative Engine Options to suit existing fleet Toyota Landcruiser Upgrade Kit; - Roof Racks for Spare Tyre (31678) - Roof Rack Mounts Pair (31679) - GVM Upgrade Spring Kit @ 4,200 kg (Supply Only - 31680) - Bellows Suspension Kit (Supply Only - 31730) - Storage Box LH Under Deck (33249) - Storage Box RH Under Deck (33248) - Under Deck Water Tanks @ 29 Litres (33137) *Ready for mounting to a Toyota 79 Series Landcruiser Cab Chassis* Drill Rig Location: Australia Learn More

Make: Sullair Model: 900XHH / 1150XH Year: 2008 Hours: 3,056 + 200 (ECM Replaced at 3,056) Engine: Caterpillar CAT C15 Diesel Condition: Good Skid Mounted Air Compressor Location: New South Wales, Australia Learn More

Make: Ariel Model: JGP2 Part Number: CL190390 Weight: 388.1 kg Brand New High Pressure Cooler Panels Location: Victoria, Australia Learn More

Hammer Size: 12" Inch Drill Bit Size: 20" Inch - With SD12 Shank (Unused) Location: Queensland, Australia Learn More

Make / Model: TL-400 Contains: - Tower - Flashlight - Headlight - Charger - Driver - Battery System D24-100 - USD Output, 5V 2A (2 Dock) for charging Headlight, Flashlight or Mobile Phone - 1-3 Battery Pack (1 Battery 30+ Hours extreme mode) - Height: 64.5 cm - 220 cm - Weight: 12.85 kg - One Man Operation - Self locking and 30 degree + up/down adjustable pole - Run Times > 10 hours (High output, 3 batteries) Application - Drilling - Construction - Maintenance - Events - Mining - Emergency - Infrastructure - Personal Control Board - Power Switch - Brightness - DIM+, DIM- - Battery Level - AC Plug - USB Output Light Brightness Area: 1,100 m2 5 m - 490 lux / 10 m - 120 lux / 20 m - 29 lux / 40 m - 7 lux Battery / AC 100-227V - AC 0-15,000 LM - High 8,000 LM - Medium 5,000 LM - Low 2,500 LM - Extreme 800 LM - Rate Power 28 wh - Rate Voltage 24.5 V - Rate Capacity 40 Ah - Working Temp: -10 to 50 degrees - Working Humidity: -20 to 95% Portable Light Tower Location: Queensland, Australia Learn More

Truck Make: International Model: T2700 Year: 1994 Engine: Cummins 350 HP KM's: 925,000 Type: 8x4 Grout Unit Make / Model: Drillex Year: 2011 Hours: Less than 5,000 - 800 m Capability - HIAB Crane Fix for Handling 1 Tonne bag of Cement Powder - 4,000 Litre Mixing Tank and Hopper - Large Capacity Mono Pump - 10,000 Litre Flat Bed Water Tank - 8 Tonne Cement Storage - PTO Driven Hydraulics Bulk Handling Self-Contained Grouting Rig Location: Queensland, Australia Learn More

Make: Gardner Denver Model: PZ-7 Year: 2014 - Triplex w/ Forged Steel Fluid End & Quick Change Caps - 5M Pulsation Dampener - Oteco 3" Inch Shear Relief Valve - Pressure Gauge - Mission 6x5 Charge Pump - Fitted with 7" Inch Liners & Pistons - No Engine or Transmission Condition: Good Skid Mounted Mud Pump Location: United States of America Learn More

Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn More

Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn More

74x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn More

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

Rotation Head Make: Axle & Engineering Model: KWL900 Hours: Approx. 5,000 - No longer needed due to conversion to water well Mast Make: KWL Model: 1600 - Dump Plate Included Location: Western Australia Learn More

Make: KWL Model: 1600 - Dump Plate Included Mast Location: Western Australia Learn More

Make: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn More

Make: UDR / Sandvik Model: 1000 / DE840 Year: 2005 Engine: Cummins 6CTA8.3 - Hydraulic Rod Clamp - Top Drive Rotary Head - Hollow Floating Spindle - Onboard FMC W1122 Bean Pump - Onboard Sullair 1150 CFM / 350 PSI Air Compressor - Still operational but due for a rebuild Includes; - Mast Dump - Rod Spinner - Sandvik DA554 Rod Handler - RC Sampling System - Fire Suppression Truck Make: MAN Type: 8x4 Truck Mounted Multipurpose Drill Rig Location: New South Wales, Australia Learn More

Type: HQ Length: 3 Metre Condition: Good Drill Rod / Pipe Location: New South Wales, Australia Learn More

*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn More

Wireline Cable: 1,000 m + - Hydraulic Motor - Double Sheave Wheel - Assembly for High Tonnage Winch - Top of Mast Assembly Design Wireline Winch Crown Wheel Assembly Location: Victoria, Australia Learn More