Search results for: 'high for size in litre fuel'

Make: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn More

Drill Rig Make: NW Model: 500 - Heli / Man Portable 126 HP Included; - Hydraulic Control Panel - Hydraulic Reservoir c/w Oil to Water Heat Exchanger - 3x Kubota Turbo Charged Diesel Engines @ 42 HP - Light Weight 39 GPM Down Hole Pump - 220 Litre Fuel Tank and AL Stand Feed Frame Complete - Wireline Winch with 750 m 3/16" Inch Wireline Installed - Top Drive Drill Head with Adapter Sub for HWL Drill Rod - Two Rotation Motors for NWL & HWL Drill Rod - 4.5" Inch Rod Clamp c/w Jaws and Steadier Bearing for H & N Rods - Hydraulic Mud Mixer with Safety Shielding - Light Weight AL Mast Rotation Guard - Spline Wrench for Locking Head to change out Drilling Subs Heli Portable Drill Rig Package Location: Canada Learn More

*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn More

Wireline Cable: 1,000 m + - Hydraulic Motor - Double Sheave Wheel - Assembly for High Tonnage Winch - Top of Mast Assembly Design Wireline Winch Crown Wheel Assembly Location: Victoria, Australia Learn More

Make / Model: Atlas Copco Size: Unknown Condition: Unknown Air End Location: Western Australia Learn More

Rig Make: UDR Model: 650 Year: 2007 - Fully Rebuilt June 2021 - Complete Service on Mercedes Truck before being parked - Complete Rewire & Control Panel for Sullair Compressor - Invoices and Documentation can be provided Includes; - 2006 Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Air Compressor (Rebuilt & Installed Jan 2019) - 200x Metres of 4" Inch Remet Drill Rods (with Inner Tubes & Saver Subs) 80% New - 50x Metres of 4" Inch Remet Drill Rods + 3 1/2" Inch Gear (Blow Up Cap, Remet Tube Tester & 4" Inch Remet Box to 3 1/2" Inch Remet Pin Saver Subs) 100% New Rig Truck Make: Mercedes Benz Model: Actros 3244 Year: 2006 KM's: 52,228 Type: 8x4 Sea Container 2 - 20ft Powered - Cone Splitter - Set-up for 3 1/2" Inch Rod Handler Gear - Cage with Running Gear - 3x New Head Tubes - 3x New 4" Inch Rod Spanners - Spare Top Swivel - High Pressure Air Hoses 1 1/2" Inch - 2" Inch (some fully socked and variety of lengths) - Spare Wear Bend - 5x New Wear Blocks - Hydraulic Foot Clamps - Set - Spare Hose Cradle - Diamond Rod Cage - Extra UDR Consumables & Parts Sea Container 3 - 20ft - UDR Hammers and Bits - 4x 5" Inch HF 127 mm Bit - Extras - Bits/Subs/Tubes/Head Tubes - 4x RE542-RE543 Bit 127 mm 5" Inch HF - 2x New 543 Sandvik Hammers - 2x 543 Sandvik Hammers @ 60% - PR120 Hammer - 5x 111 mm 2-4.5" Inch New Remet Aircore Bits - 4x 111 mm 2-4.5" Inch Used Remet Aircore Bits - 5x Metzki Bits @ 50% - SR170 Hammer & 4 1/8" Inch TC Bit, Shroud & Inner Tube - 6" Inch Conventional Hammer with Bit Pallets Quantity: 4 - Spares Truck Mounted Drill Rig Package Location: Western Australia Learn More

Make: Newage Stamford Model: SC634B Year: 1999 Hours: 371 Engine: Detroit 12V149 Diesel Quad Turbo + Twin Super Charged @ 800 HP - Control Cabinet - 4x Bolt On, Fold Up and Down Steel Walk Platforms for Side Access - 760 kVA / 1057 AMPS / 415 Volt - Load Tested 12 months ago and stored since - unused - Video of load test available on request - Batteries Included - Battery Holder / Stand - 1000 Litre Fuel Tank Available (Not original, but easily plumbed by competent person) - Fuel Tank Stand - Muffler and Engine Pipes Included Skid Mounted Generator Location: Victoria, Australia Learn More

Make: Sullair Model: Dino DXN12 (ID Plate on 1 Unit Only) - Plus 1 only Disassembled Quantity: 3 High Pressure Compressor Units Rotary Screw Air Ends Location: Western Australia Learn More

Make: FMC Model: L1622HV Triplex Pressure: Maximum 1500 PSI - Minimum 100 PSI Fluids Used: Various grades of muds & water - This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 PSI. - The pump skid weighs only 2450 kg (wet) and only covers an area of 2.4 m x 1.92 m making it very easy to move into restricted areas due to its compact abilities. - Because of its limited size it makes it very easy to transport to various locations. - The pump skid is compact yet practical to access any part of the pumps. Skid Mounted Bean Mud Pump Location: Queensland, Australia Learn More

Tongs Size: 8 5/8" Inch - 9" Inch - Free and working Quantity: 2 Sets Location: Queensland, Australia Learn More

Make: Sandvik Model: G88 Between Ears: 420 mm Pin Size: 100 mm Pin Centres: 590 mm Excavator Hammer Location: Western Australia Learn More

Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn More

Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn More

Down Hole Bits Type / Size: 127 mm Quantity: 15 *New* Location: Northern Territory Learn More

Make: Cummins Part No: 3080521 Application No: 1TBG88A Year: 2018 Suits K38, K50 & K1800A Cummins Engines Fuel System / Pump Location: Queensland, Australia Learn More

Make: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Has a stand alone fuel tank* Location: Queensland, Australia Learn More

Make: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Doesn't have a stand alone fuel tank* Location: Queensland, Australia Learn More

Make/Model: DW400C Year: New (2022) Machine Hours: 0 Engine: Cummins 6LTAA8.9 @ 360 HP Includes: - Sauer Danfoss Load Sensed Piston Pumps - Sauer Danfoss PVG Valves - 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque - Sliding Head - Tilting Head - Floating Spindle with 2.5" Waterway - 25 Tonne Pullback - Dump Mast (Long Stroke) - 20" Inch Diameter Through the Work Table - Breakout Ram - 8 7.5" Inch Mud Pump (Made in India) - 10 Tonne Single Pull Winch Mounted on Top of Mast - Manuli Hoses on All High Pressure Lines - 4 x Enclosed Outriggers - Can extend for ease of loading onto a lowbed trailer *Can easily be converted to RC due to the large thru-hole in the rotation head* *Can be delivered on rails for mounting onto any truck* Location: Philippines Learn More

Make: Oilwell Model: Duplex 214-P Year: 2007 Hours: Low Dimensions (L x W x H): 5440 mm x 2750 mm 2200 mm Weight: 16.16 T Engine: Mercedes Engine Model: OM457LA Power: 422 HP / 315 kW RPM: 1800 Max Torque: 2000 Nm @ 1200 RPM 7 1/2 x 14 Liner Sizes from 5 1/2 to 7 1/4 Max Pressure 5 1/2" Liner: 1875 PSI @ 345 Gallons / min Max Volume 7 1/4" Liner: 765 PSI @ 620 Gallons / min Self-Contained Skid with 350L Diesel Tank Care and Operation Manual available w/ Full Specifications Condition: Good Location: Queensland, Australia Learn More

Drill Rig Make: Bourne Model: 2000 TDH-NT Truck 6x4 Crane Carrier 12v 1992 GM Powers Truck & Hydraulics 6 Speed Alison Automatic Drives Truck (High & Low Range) Rod Handler 5 1/2" x 8 Bourne Mud Pumps on Board Location: Western Australia Learn More