Search results for: 'high for skid alpena cooler'

Make: Ariel Model: JGP/2 Year: 1996 Stroke In: 3.00 Max Rated Speed: 1800 RPM Min Rated Speed: 900 RPM Max Total Rod Load (Compression + Tension): 12,000 lbs Engine: Caterpillar Skid Mounted Booster Location: New South Wales, Australia Learn More

Various Items (All USA Manufactured): 1. Carrier w/ LTO 750 Draw Works with 2 x CAT 3406 Engines ( 480 HP each with compound), Hydraulic Rams for Raising Mast, Dead Line Anchor & Other Equipments (No Mast) $35,000 ex GST 2. 2 x National 8-P-80 Skid Mounted Mud Pumps (w/ No Power Pack) $25,000 ex GST 3. 1 x 13-5/8" Inch 5,000 PSI BOP Stack Test Stump (Annular, Single & Double) $65,000 ex GST 4. 1 x MCC Shack $5,500 ex GST 5. 1 x Trip Tank $4,500 ex GST Location: Western Australia Learn More

Make: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Has a stand alone fuel tank* Location: Queensland, Australia Learn More

Make: Air Research Model: 8v92 Engine: Detroit Diesel 8v92TA @ 230 HP / 1,800 RPM / 12 Volt 2 Stage Reciprocating Pressure: 1,000 PSI / 2,200 CFM Inlet Pressure: 350 HP Direct Drive: 1,800 RPM Dimensions (L x W x H): 2.350 m x 1.1700 m x 2.000 m Weight: 3.0 Tonne Wet Skid Mounted Booster Location: Queensland, Australia Learn More

Make: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Doesn't have a stand alone fuel tank* Location: Queensland, Australia Learn More

Make/Model: DW400C Year: New (2022) Machine Hours: 0 Engine: Cummins 6LTAA8.9 @ 360 HP Includes: - Sauer Danfoss Load Sensed Piston Pumps - Sauer Danfoss PVG Valves - 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque - Sliding Head - Tilting Head - Floating Spindle with 2.5" Waterway - 25 Tonne Pullback - Dump Mast (Long Stroke) - 20" Inch Diameter Through the Work Table - Breakout Ram - 8 7.5" Inch Mud Pump (Made in India) - 10 Tonne Single Pull Winch Mounted on Top of Mast - Manuli Hoses on All High Pressure Lines - 4 x Enclosed Outriggers - Can extend for ease of loading onto a lowbed trailer *Can easily be converted to RC due to the large thru-hole in the rotation head* *Can be delivered on rails for mounting onto any truck* Location: Philippines Learn More

Make: Oilwell Model: Duplex 214-P Year: 2007 Hours: Low Dimensions (L x W x H): 5440 mm x 2750 mm 2200 mm Weight: 16.16 T Engine: Mercedes Engine Model: OM457LA Power: 422 HP / 315 kW RPM: 1800 Max Torque: 2000 Nm @ 1200 RPM 7 1/2 x 14 Liner Sizes from 5 1/2 to 7 1/4 Max Pressure 5 1/2" Liner: 1875 PSI @ 345 Gallons / min Max Volume 7 1/4" Liner: 765 PSI @ 620 Gallons / min Self-Contained Skid with 350L Diesel Tank Care and Operation Manual available w/ Full Specifications Condition: Good Location: Queensland, Australia Learn More

Make: Sullair Model: 900XHH / 1150XH Engine: Caterpillar CAT Skid Mounted Air Compressor Location: Queensland, Australia Learn More

Drill Rig Make: Bourne Model: 2000 TDH-NT Truck 6x4 Crane Carrier 12v 1992 GM Powers Truck & Hydraulics 6 Speed Alison Automatic Drives Truck (High & Low Range) Rod Handler 5 1/2" x 8 Bourne Mud Pumps on Board Location: Western Australia Learn More

Make: Sandvik Model: UDR650 / DE810 Part: Radiator / Cooler Pack Location: Queensland, Australia Learn More

White Skid Mounted Diesel Tank Learn More

Detroit V8 Diesel Engine Skid Mounted Cooler Pack Location: Western Australia Learn More

Atlas Copco Craelius Pumpac Mud Year: 2011 Condition: Good Motor: John Deere Exterior Colour: Yellow / Grey Comparable to a 5x6 Mud Pump 1000 PSI Skid Mounted Location: Queensland, Australia Learn More

Make: National Model: G-700 Type: 8” Inch x 14” Inch 14” Inch Stroke - Cast Iron Fluid End - Surge Chamber 285 GPM @ 3,500 PSI with 5” Inch Pistons 805 GPM @ 1,265 PSI with 8” Pistons Skid Mounted Mud Pump Location: Victoria, Australia Learn More

Make: Cortech Model: CSD1300L CSD1300L core drilling rig is specially designed for diamond core drilling. Track crawler mounted rig facilitates moving around with great convenience. Robust structure plus strong power supply ensures high penetration rate and outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 1,300m 1,000m 700m 400m Hydraulic System Pressure 26MPa Cooling Air Cooled Power System Model Cummins 6BTA5.9 –C180 Type Turbo Charged Power 132KW Engine RPM 2,500rpm Drill Head Max Torque 4,257Nm Max Rotation ,RPM 1,182rpm Feed Stroke 3.5m Max Inside Diameter 117mm Max Pull / Max Push 127KN/ 50KN Main Winch Max Pull 68KN Pulling Speed 28m/min Rope Diameter 16mm Rope Length 30m Wireline Winch Max Pull 11KN(bare drum) Pulling Speed 120m/min Rope Diameter 6.6mm Rope Length 1,000m Mast Length 10m Drilling Angle 45°-90° Dump Length 1.1m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 5,100×2,350×2,600mm Total Weight: 8.5t Diamond Coring Drill Rig Location: China Learn More

Make: Cortech Model: CSD3000 CSD3000 core drilling rig is specially designed for diamond core drilling. It provides precise control on the drilling capacity. The drill head is designed to slide and dump, together with the full angle rotation structure for drill mast, it effectively reduces manual inputs and improves efficiency. The hydraulic legs are stretchable, which broaden the bearing surface, and ensure outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • 9 meters rod pulling largely improves drilling efficiency due to rod collection frame design on mast • The design of side shift by hydraulic of rotation head largely reduces working tensions and guarantees personnel safety • Multi-pressure gauge reads real time pressures for kinds of major components • High/low speed control of main winch largely meets speed requirements for rods handling • Stepless control of mud pump flow facilitates various drilling needs for mud • telescopic mast greatly reduces working tensions and improves drilling efficiency. • Horizontal extension of jack legs guarantees firm rig standing on the ground. • Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • Independent tramming cab set in front provides full view for easy rig walking and driver’s safety • Mast dumping guarantees perfect stability during drilling; • Independent hydraulic jacks facilities leveling of the rig; • Great convenience of control of feed pressure; • Standardized parts and components make maintenance and repairing easy; • Real time reading of drilling data on gauges on the control panel; • Mud pump and mixer powered by the rig’s hydraulic system, controlled directly on the rig’s panel; • Top grade hydraulics of European origin; • Experienced engineers plus adequate spare parts ready to provide full service. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 3,000m 2,300m 1,600m 1,050m Hydraulic System Pressure 28MPa Cooling Air Cooled Power System Model Cummins 6LTAA8.9-C325 Type Turbo Charged Power 239KW Engine RPM 2,200rpm Drill Head Max Torque 8,170Nm Max Rotation ,RPM 1,250rpm Feed Stroke 3,450mm Max Inside Diameter 117mm Max Pull /Max Push 250KN/110KN Main Winch Max Pull 181.44KN Pulling Speed Low:33m/min High:70m/min Rope Diameter 24mm Rope Length 41m Wireline Winch Max Pull 18KN(bare drum) Pulling Speed 150m/min(bare drum) Rope Diameter 6.6mm Rope Length 2,500m Mast Length 11.2-13.7m Drilling Angle 45°-90° Dump Length 1.4m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 11,240×2,310×3,330mm Total Weight 23.5t Diamond Coring Drill Rig Location: China Learn More

Make: EWS Model: 446 Hours: 1,400 Engine: Detroit 8V92 @ 560 HP - Gas Spec - Air Operated Remotes - Set up on Standard Container Base Skid Mounted Mud Pump Location: Victoria, Australia Learn More

Extreme HP Frac Pump Skid The Jack Up Skid when raised measures 1660 mm from ground to bottom of skid enough height for a trailer of 1500mm height to drive underneath. The Jack Up Skid dimensions are: 2505mm wide x 9135mm overall length and will reach a height of 2615 mm high when the jack legs are retracted and skid is sitting on the ground .Total height dimension of the skid is 4280 mm when the jacking legs are raised. Total Mass of unit complete with equipment 20 000 Kg. CAT C32 rated at 1350hp Allison 8000 series auto trans DP8962R Weir SPM pump Model Tw52250 Build date July 2008 Hours – Approx. 1000 Learn More

Triplex FMC- L1622HV Bean Mud Pump Package For Hire This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 psi. The pump skid weighs only 2450kg (wet) and only covers an area of 2.4m x 1.92m making it very easy to move into restricted areas due to its compact abilities. Because of its limited size it makes it very easy to transport to various locations. The pump skid is compact yet practical to access any part of the pumps. PRESSURE: Maximum 1500 psi - Minimum 100psi Fluids used: Various grades of Muds, water. Learn More

LW-446 Triplex Jack Up Mud Pump For Sale Skid Mounted Jack Up, Hydraulic Jacklegs and Outriggers Built-in. LW-446 Triplex Mud Pump Complete With :- • 6” Picton & Liner Assembly Rated Input Power 324KW (440HP) Rated Stroke 320 Strokes/Minute (320 SPM) Stroke 152.4mm (6”) Gear Ratio 4.578 : 1 Max Operational Pressure 35 Mpa Valve Chamber API 4 Valve-Over Max. Liner Diameter 6” Maximum Liner Pressure 160 Strokes/Minute 16.9Mpa Dia. Pinion Shaft 95.25mm (3-3/4”) Key 22. 174x15.9mm Learn More