Search results for: 'hire for size in litre fuel'
- Did you mean
- hire for sale in litre fuel
- high for size in litre fuel
- Related search terms
- hire for sale dallas tx
- hire for sale in little fulli
- hire for sale in litre fulli
- hire for sale in litre fuel
- hire for sale mclean screw manassas va
-
20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3420)For HireTray Length: 12 m (Not Including Power Pack) Width: 3.2 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3419)For HireTray Length: 10 m (Not Including Power Pack) Width: 2.5 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
2004 Isuzu F3 FVZ 1400 Support Truck ($47,500 ex GST) (sale-ehub3402)For Sale$47,500.00Make: Isuzu Model: F3 FVZ 1400 Year: 2004 KM's: 86,962 GVM: 24,000 kg - 5,000 Litre Diesel Tank - 3,000 Litre Water Tank - With Pro Hydraulic Pumps and Reels Support Truck Location: Western Australia Learn MoreMachine hours N/A KILOMETERS 86,962
YEAR 2004
BRAND Isuzu
LOCATION Western Australia
MODEL F3 FVZ 1400
-
6x Sandvik DR560/80 Track Mounted Contour DTH Drill Rigs (FOR HIRE/RENT - POA) (hire-ehub3356)For HireMake: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn MoreMachine hours Various
KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL DR560/80
-
NW500 126HP Heli / Man Portable Drill Rig + Package (POA) (sale-ehub3327)For Sale$0.00Drill Rig Make: NW Model: 500 - Heli / Man Portable 126 HP Included; - Hydraulic Control Panel - Hydraulic Reservoir c/w Oil to Water Heat Exchanger - 3x Kubota Turbo Charged Diesel Engines @ 42 HP - Light Weight 39 GPM Down Hole Pump - 220 Litre Fuel Tank and AL Stand Feed Frame Complete - Wireline Winch with 750 m 3/16" Inch Wireline Installed - Top Drive Drill Head with Adapter Sub for HWL Drill Rod - Two Rotation Motors for NWL & HWL Drill Rod - 4.5" Inch Rod Clamp c/w Jaws and Steadier Bearing for H & N Rods - Hydraulic Mud Mixer with Safety Shielding - Light Weight AL Mast Rotation Guard - Spline Wrench for Locking Head to change out Drilling Subs Heli Portable Drill Rig Package Location: Canada Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND NW
LOCATION Canada
MODEL 500
-
Various Hose Restraints, Cable Stockings, Safety Shackles & Cambuckles / Hose Straps (POA) (sale-ehub3284)For Sale$0.00*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL See Description for Sizes
-
Atlas Copco Air End (Open to Offers) (sale-ehub3220)For Sale$0.00Make / Model: Atlas Copco Size: Unknown Condition: Unknown Air End Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION Western Australia
MODEL Atlas Copco
-
Sykes VP150i 1,500 RPM Skid Mounted Pump (FOR HIRE/RENT - POA) (hire-ehub3197)For HireMake: Sykes Model: VP150i Pump Speed: 1,500 RPM Max Pressure: 230 kPa Best Pressure: 167 kPa Min Pressure: 133 kPa 150 x 150 x 285 Skid Mounted Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sykes
LOCATION Queensland, Australia
MODEL VP150i
-
Solar Generators Trailer (FOR HIRE/RENT - See Description for Pricing) (hire-ehub3125)For HireMake / Model: Solar Generators - Full Solar Data Logging - Full Monthly Data Logging for Carbon Offsets Peak Power: 6 kW Continuous: 2.4 kW Battery Storage: 12 kWh Solar Power: 2,520 W Weight: 750 kg appox. Pricing: 1-7 days $120.00 per day ex GST 8-30 days $105.00 per day ex GST Trailer Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Solar Generators
LOCATION New South Wales, Australia
MODEL Solar Generators
-
1999 Newage Stamford SC634B Skid Mounted Generator + Control Cabinet ($35,000 ex GST) (sale-ehub3120)For Sale$35,000.00Make: Newage Stamford Model: SC634B Year: 1999 Hours: 371 Engine: Detroit 12V149 Diesel Quad Turbo + Twin Super Charged @ 800 HP - Control Cabinet - 4x Bolt On, Fold Up and Down Steel Walk Platforms for Side Access - 760 kVA / 1057 AMPS / 415 Volt - Load Tested 12 months ago and stored since - unused - Video of load test available on request - Batteries Included - Battery Holder / Stand - 1000 Litre Fuel Tank Available (Not original, but easily plumbed by competent person) - Fuel Tank Stand - Muffler and Engine Pipes Included Skid Mounted Generator Location: Victoria, Australia Learn MoreMachine hours 317
KILOMETERS N/A YEAR 1999
BRAND Newage Stamford
LOCATION Victoria, Australia
MODEL SC634B
-
FMC L1622HV Triplex Bean Skid Mounted Mud Pumps (POA) (sale-ehub3076)For Sale$0.00Make: FMC Model: L1622HV Triplex Pressure: Maximum 1500 PSI - Minimum 100 PSI Fluids Used: Various grades of muds & water - This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 PSI. - The pump skid weighs only 2450 kg (wet) and only covers an area of 2.4 m x 1.92 m making it very easy to move into restricted areas due to its compact abilities. - Because of its limited size it makes it very easy to transport to various locations. - The pump skid is compact yet practical to access any part of the pumps. Skid Mounted Bean Mud Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND FMC
LOCATION Queensland, Australia
MODEL L1622HV
-
2013 CE100 Diamond Core Track Mounted Drill Rig (FOR HIRE/RENT - Price Negotiable) (hire-ehub3066)For HireMake / Model: CE100 Year: 2013 (Rebuilt completed in 2022) Hours: 551 - Fully Re-Engineered - NDT Testing Completed - CT14 Hydraulic Operating System - NQ, HQ, PQ Drilling Capabilities - Up to date Safety Stop Systems - Engineered and compliant hand rail and walkway system and access ladders - Full lighting for N/S operations - Certified FOPS on driller platform - Running new Danfos Primary Hydraulic Pump at >3500 PSI direct from John Deere 127 HP - 165 HP engine - 5.7 Tonne Main Winch with certified 16mm Winch Rope - A new AMC Main Water Pump <1000 PSI with a PRV Valve Set @750 PSI - New Stryker 45ltr Certified Fire Suppression system installed - A UDR Rod Spinner has been engineered into mast structure for hands free operation of tripping rods - A hydraulic operated Breakout Spanner allows for breakout of rod joins or subs - Tungsten inserts interchangeable on Breakout Spanner - UDR Foot Clamp assembly added for ease of maintenance and clamping of rod string Diamond Core Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 551
KILOMETERS N/A YEAR N/A BRAND CE100
LOCATION Western Australia
MODEL CE100
-
2017 Atlas Copco XRVS 1050 Wheel Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3025)For HireMake: Atlas Copco Model: XRVS 1050 Year: 2017 Hours: 816 Wheel Mounted Air Compressor Location: New South Wales, Australia Learn MoreMachine hours 816
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL XRVS 1050
-
2 Sets x 8 5/8" Inch - 9" Inch Tongs ($9,500 ex GST) (sale-ehub2006)For Sale$9,500.00Tongs Size: 8 5/8" Inch - 9" Inch - Free and working Quantity: 2 Sets Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 8 5/8" Inch - 9" Inch
-
Sandvik G88 Excavator Hammer (POA) (sale-ehub1992)For Sale$0.00Make: Sandvik Model: G88 Between Ears: 420 mm Pin Size: 100 mm Pin Centres: 590 mm Excavator Hammer Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL G88
-
2012 Chengdu Zhonghang Machinery F-500 Triplex Mud Pump Mounted on Trailer (FOR HIRE/RENT - POA) (hire-ehub1877)For HireMake: Chengdu Zhonghang Machinery Model: F-500 Year: 2012 Hours: TBA Pump Speed: 165 r/min Engine: 2011 Cummins QSX15 Trailer Mounted Triplex Mud Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Chengdu Zhonghang Machinery
LOCATION Queensland, Australia
MODEL F-500
-
2019 Elastec 770 770 CFM Pulling Vacuum Spill Trailer ($KES13,800,000) (sale-ehub1773)For Sale$0.00Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn MoreMachine hours Less than 250
KILOMETERS Less than 1,000
YEAR 2019
BRAND Elastec
LOCATION Nakuru, Kenya
MODEL 770
-
2008 Atlas Copco ROC D9C Blast Hole Track Mounted Drill Rig ($117,500 ex GST) (sale-ehub1722)For Sale$117,500.00Make: Atlas Copco Model: ROC D9C Hours: 12,000 - 13,000 Year: 2008 Drill Bit Size: 76 mm to 115 mm - The rock drill was rebuilt 250 impact hours ago - Has the original engine Condition: Good Track Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 12,000 - 13,000
KILOMETERS N/A YEAR 2008
BRAND Atlas Copco
LOCATION Queensland, Australia
MODEL ROC D9C
-
15 x *New* 127 mm Down Hole Bits ($550 ex GST each) (sale-ehub1615)For Sale$550.00Down Hole Bits Type / Size: 127 mm Quantity: 15 *New* Location: Northern Territory Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Northern Territory
MODEL N/A
-
Cummins Fuel System/Pump to Suit Cummins K38, K50 & K1800A Engines ($3,950 ex GST) (sale-ehub1555)For Sale$3,950.00Make: Cummins Part No: 3080521 Application No: 1TBG88A Year: 2018 Suits K38, K50 & K1800A Cummins Engines Fuel System / Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2018
BRAND Cummins
LOCATION Queensland, Australia
MODEL 3080521
Filter