Search results for: 'hours for size in case rent auburn al'

Rig Make: Hydco Model: 70 Hours: 10,723 - Onboard Air Compressor - Rod Handler Truck Make: International Model: T-Line Year: 1985 KM's: 31,721 GVM: 26,500 kg Truck Mounted Drill Rig Location: Western Australia Learn More

Make: Toa-Tone Model: CSD-100B Year: 2014 Hours: 0 Sonic Head Location: Japan Learn More

Make: Caterpillar Model: 773G Year: 2014 Hours: 23,585 Idle Hours: 13,606 - New Tank - 3x Adjustable Rear Spray Heads - 2x Side Spray Heads - Hose Reel - Water Cannon - Top Fill Water Truck Location: United States of America Learn More

Unit #1 Make/Model: Custom Made Year: 1995 KM’s: 40,000 Power Pack Hours: 140 Engine: Mazda Diesel 4 Cylinder Dual Fixed Displacement Hydraulic Power Pack Dimensions; Length: 2.2 Metres Width: 1.1 Metres Height: 1.1 Metres Weight: 1,060 kg - Last Started July 2025 - No Batteries (24 Volt System) - Fixed Displacement Pump @ 32cc per rev with Working Pressure @ 2,500 PSI. - Fitted with a Piggy Back - Fixed Displacement Pump @ 11cc per rev with Working Pressure @ 2,500 PSI - All Safety Guards Available - Compliance Labelled - Gauges: Oil Pressure, Fuel Gauge, Hour Meter, Charge, Battery Isolation Lock Out, etc. - Emergency Stop Switch - Throttle - Key Start - Forklift Channels (Center Balanced) - Crane Lifting Eyes on Corners Unit #2 Make/Model: Custom Made Year: 1995 KM’s: Less than 40,000 Power Pack Hours: 51 Engine: Mazda Diesel 4 Cylinder Variable Displacement Hydraulic Power Pack Dimensions; Length: 2.2 Metres Width: 1.1 Metres Height: 1.1 Metres Weight: 1,060 kg - Last Started July 2025 - No Batteries (24 Volt System) - Fixed Displacement Pump @ 45cc per rev with Working Pressure @ 2,500 PSI. - All Safety Guards Available - Compliance Labelled - Gauges: Oil Pressure, Fuel Gauge, Hour Meter, Charge, Battery Isolation Lock Out, etc. - Emergency Stop Switch - Throttle - Key Start - Forklift Channels (Center Balanced) - Crane Lifting Eyes on Corners Quantity: 2 Skid Mounted Hydraulic Power Units Location: Queensland, Australia Learn More

Make: Everdigm Model: Rocky B180 Bit Shank: N180 Shank Connection: API 8-5/8" Inch Reg. Pin Piston Stroke: 5.75" Inch Cylinder Bore: 12.28" Inch Hole Sizes: 18" Inch ~ 26" Inch Wrench Size: A/F 14" Inch - Brand New - Bailing Subs/Break Out Plate, etc. - Hammer forklift cradle included - 19” Hammer bit included (unused) RS Hammer Location: Queensland, Australia Learn More

Make: Sandvik Model: LH202 Year: 2020 Hours: 487 - CE Machine - Very Good Condition - EPA Tier 4 Narrow Vein Loader Location: Sweden Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - Warman Clamps - Under Casing Clamps - Wireline and Main Winch - Rod Bin - Auger Carrying Rack at Front of Rig - Auto SPT - Silvan Pump - All New Suction and Hydraulic Hoses for Pump with Camlocks - 2x Mud Tanks (1,000 L & 500 L - Plastic) Down Hole Gear - 10x 3m PQ Rods Plus Shorts - 10x 3m HQ Rods Plus Shorts - 10x 3m NQ Rods Plus Shorts - 10x 3m Junior Mayhew Rods with Spanner Flats Plus 2x 1.5 m - 5x 100mm x 1.5m Augers Plus Bit & 20 Pins - 2x 1.5 NMLC Core Barrels - 6x NMLC Core Bits - 4x Impreg & 2x Surface Set - 40x Core Lifters / 6x Cases / 40x Stop Rings - 2x NMLC Reamers - 2x BQ Reamers - 3x BQ Core Bits - 2x 1.5m NQ3 Core Barrels - 2x Sets of Splits - 1x 3m NQ3 Core Barrel - 2x Locking Couplings - 2x Adaptor Couplings - Box of Barrel Spares - 1x HQ/NQ Overshot - 1x Set of PQ, HQ, NQ Inner Tube Wrenches - 10x 75mm Shelby Tubes Plus Drive Head - 10x 50mm Shelby Tubes Plus Drive Head - 2x SPT Samplers - 2x Pulling Plugs - 1x Spare Water Swivel Plus 2x Repair Kits - 1x Repair Kit for Rig Swivel - Many Subs to Facilitate all the Drilling Requirements - Stillsons - 2x 36" Inch, 2x 24" Inch & 2x 18" Inch - 1x Gas Mig Welder - 1x Honda 3.5 kVA Powered Generator - 1x PQ Birds Mouth for Water Return to Mud Tanks - 1x HQ Birds Mouth for Water Return to Mud Tanks - New Suction and Delivery Hoses - 1x 100mm Down Hole Hammer with 2x Bits 118mm *New* - 1x 75mm Down Hole Hammer with 2x Bits 95mm *New* Support Truck Make: Mitsubishi Model: Canter Year: 2009 Type: 4x4 - Hydraulic Hi-Ab Crane - 500 Litre Water Tank - 400 Litre Diesel Tank for Rig & 12 Volt Pump - 1x kVA Inverter - Wired so diesel pump won't engage until the switch is turned on in the locked tool box. - 1x Centrifugal Pump 1 1/2" Inch plus Suction and Delivery Hoses with Camlocks - 2x Tool Boxes - 1x Box of Hand Spanners & Sockets - Fitted Drill Rod Bins & Core Barrel Bins - Currently Registered until May 2025 Tracked Mounted Drill Rig Support Truck + Down Hole Gear Package Location: New South Wales, Australia Learn More

Make: JLG Model: 460SJ Year: 2007 Hours: 1,307 Boomlift Location: New South Wales, Australia Learn More

Make: Denair Model: DACY-22/20 Year: 2024 Hours: 87 770 CFM 290 PSI Portable Air Compressor Location: Western Australia Learn More

Make: New Holland Model: B115B Backhoe Location: New South Wales, Australia Learn More

Make: Drill Techniques Model: GM-2GI Year: 2020 Height: 3.5 Metres Tare: 4,000 kg Hydraulic Jack Up Grout Unit Location: New South Wales, Australia Learn More

Capacity: 15,000 Litre Quantity: 15 Above Ground Waste Sumps / Tanks Location: New South Wales, Australia Learn More

Type: 10 3/4" Inch Length: 6 Metre Quantity: 9 Threaded Steel Casing Location: New South Wales, Australia Learn More

Type: 12 3/4" Inch Length: 6 Metre Quantity: 12 Threaded Steel Casing Location: New South Wales, Australia Learn More

Type: 16" Inch Length: 6 Metre Quantity: 3 Threaded Steel Casing Location: New South Wales, Australia Learn More

Type: 8 5/8" Inch Length: 6 Metre Quantity: 10 Threaded Steel Casing Location: New South Wales, Australia Learn More

Make: Brevini Year: 2017 Hours: 0 (Complete Overhaul in June 2025) Weight: 1,650 kg - All Hydraulics and Electrics have been fully re-conditioned - 55kW Electric Motor driving a hydraulic pump, which in turn drives a reciprocating high pressure water pump with a maximum output of 90L/min of water at 180 Bar pressure. - The complete pump system has been designed to run continuously and all equipment is housed within a fully enclosed cover. - As the motor drives a hydraulic pump, the high pressure water output is fully adjustable while the motor runs at a constant speed, unlike a high pressure water pump that is direct driven by a fixed speed electric motor. Additionally, because the hydraulic circuit incorporates an unloader valve, it is possible to switch the high pressure water on and off without the need to stop the motor or bypass high pressure water into a holding tank. - The hydraulics system is of robust construction containing 300L of oil and an integrated oil cooler. - The system can also be used as a 55 kW hydraulic power pack. Skid Mounted Pump Location: Queensland, Australia Learn More

Make: Remet Size: 4" Inch Length: 3 Metres Quantity: 54 - RC - With Inner Tubes Drill Pipe Location: Queensland, Australia Learn More

Air Core Drill Rig - New Comp Rotation Head - Deck Engine - Main Feed Ram - Radiator Hydraulic Pump - Tilting Rod Bin - Onboard Air Compressor Hours: 100 Approx. Compressor Capacity: 600 CFM / 230 PSI - Cradle for Cyclone Pump points for Booster Bean Pump - Dump Mast - Has been water boring for the last 5 years - Too many spares to list Truck Make: Hino Model: GT Year: 2014 KM's: 64,000 Type: 4x4 Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Sizes: 3" Inch / 4" Inch / 5" Inch Working Pressure: 2,500 PSI - Basic Hard Shut in Nitrile Bladder - Wireline Stripper - Hydraulic Activator - Hand Pump Activator - All Hoses Burst Protection or Fire Protected - Zone One Hoses are Coflexip and Armour Plated - Casing Adaptor to be purchased Annular Diverter Location: Queensland, Australia Learn More