Search results for: 'motor hire for size by open only'

New Build FH1300 Multipurpose Track / Truck Mounted Drill Rig (POA) (sale-ehub3570)

For Sale

$0.00

Model: FH1300 Engine: Caterpillar CAT C7.1 Electronic @ 187 kW (250 HP) Pull Back: 115 kN (25,853 lbf) Actual Pull Down: 70 kN (15,736 lbf) Water Pump Options; - Standard FMC W1122BCD 140 lpm @ 1,000 psi - FMC L11-18SC 265 lpm @ 1,800 psi Depth Capacity; NQ Core: 1,300 m HQ Core: 885 m Open Hole 3 1/2" Inch Rods: 380 m RC 4 1/2" Inch: 220 m (Nominal) Traverse Speed; Up: 60 m/min (196.8 ft/min) Down: 56 m/min (183.7 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 8,087 Nm (6,111 ft/lb) in low gear - 0-1,500 RPM Speed Range - Two Speed Gearbox - High Gear 3.04:1 & Low Gear 12.61:1 ratios - Variable Displacement 160cc Hydraulic Motor - Adjustable Rotation Torque Control - Infinitely Variable Rotation Speed Control - Floating Spindle 3 1/2" Inch API IF Pin Thread - Pressure Lube System with Cooler and Filter Main Winch; - Maximum Pull: 100 kN (10,000 lbf) - 120 m/min (393 ft/min) - Mast Top Mounted - Electronic Winch Travel - Fail to safe - Main Winch Rope - Safety Factor to Meet BS/EN791 - Planetary Reduction Gear Box & Brake - Variable Displacement Hydraulic Motor Drive Wireline Winch; - Deck Mounted - Maximum Pull: 15 kN (3,372 lbf) - Rope Capacity: 1,400 Metres x 6 mm Rope - Adjustable Position Wireline Spooler - Maximum Speed: 450 m/min (1,476 ft/min) - Adjustable Pull Limiter - Safety Stop System - Wireline Depth Counter as an option New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Home Made
LOCATION	Australia	MODEL	FH1300

Add to Wish List Add to Compare

1750 Scout Auger Drill Rig (POA) (sale-ehub3565)

For Sale

$0.00

Model: 1750 Scout Engine: Perkins Diesel Torque: 2,500 Nm at 205 bar and 110 RPM Stroke: 1.75 m Pull-Out / Pull-Down: 1,100 kg Capacity (Guide Only): NQ - 60 m / 4" Inch Open Hole - 30 m / 3 1/2" Inch Auger - 15 m - Custom Toyota 33220 Tray - Direct Dive Auger Head with High Torque Head Motor and Fittings - Fine Feed Control - Auger Drive Sub (1 1/8" Inch Hex) - RHS Mast - Tilt Frame for Vehicle/Trailer Mounting - Hydraulic Tilt - Heavy Duty Pull-Down Chain - Nylon Idler Rollers - Standard Auger Guide - Standard Control Panel - Hydraulic Operation - Rain Hood for Motor & Lockable Cage for Spare Wheel & Motor - Remove Throttle and Stop - Water Filter for Fuel / Water Separation - Light Guard for Augers 500 mm to 1,800 mm - Oil Cooler - Simple Rack for Augers Options for Drill; - Hollow Spindle Head and Tooling for Fluid Drilling - 2 Levelling Jacks for Tray Mount Drills - Tilting Rack for Augers - Alternative Engine Options to suit existing fleet Toyota Landcruiser Upgrade Kit; - Roof Racks for Spare Tyre (31678) - Roof Rack Mounts Pair (31679) - GVM Upgrade Spring Kit @ 4,200 kg (Supply Only - 31680) - Bellows Suspension Kit (Supply Only - 31730) - Storage Box LH Under Deck (33249) - Storage Box RH Under Deck (33248) - Under Deck Water Tanks @ 29 Litres (33137) *Ready for mounting to a Toyota 79 Series Landcruiser Cab Chassis* Drill Rig Location: Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Australia	MODEL	1750

Add to Wish List Add to Compare

12" Inch Hammer & 20" Inch Drill Bit ($25,000 ex GST) (sale-ehub3525)

For Sale

$25,000.00

Hammer Size: 12" Inch Drill Bit Size: 20" Inch - With SD12 Shank (Unused) Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	12" Inch & 20" Inch

Add to Wish List Add to Compare

Gardner Denver 8x5 Hydraulic Driven Trailer Mounted Mud Pump (FOR HIRE/RENT - POA) (hire-ehub3493)

For Hire

Make: Gardner Denver Model: 8x5 - Hydraulic Driven Trailer Mounted Mud Pump Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Gardner Denver
LOCATION	New South Wales, Australia	MODEL	8x5

Add to Wish List Add to Compare

Brand New Hanjin D&B 35 Main Winch (Open to Offers) (sale-ehub3490)

For Sale

$0.00

Make: Hanjin Model: D&B 35 - Brand New Main Winch Location: South Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Hanjin
LOCATION	South Australia	MODEL	D&B 35

Add to Wish List Add to Compare

2x Elgi 900 CFM / 250 PSI Air Ends (Open to Offers) (sale-ehub3477)

For Sale

$0.00

Make: Elgi 900 CFM 250 PSI Quantity: 2 Air Ends Location: South Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Elgi
LOCATION	South Australia	MODEL	900 CFM / 250 PSI

Add to Wish List Add to Compare

Caterpillar CAT C13 Cooler Pack with Brand New Radiator & Intercooler (Open to Offers) (sale-ehub3476)

For Sale

$0.00

Make: Caterpillar Model: C13 - Cooler Pack - Brand New Radiator & Intercooler Location: South Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Caterpillar
LOCATION	South Australia	MODEL	C13

Add to Wish List Add to Compare

1997 Sullair 1,800 CFM Air Compressor & 500 PSI Aerial Booster Skid Mounted Package (Open to Offers) (sale-ehub3454)

For Sale

$0.00

Engine: Caterpillar CAT 3412 V12 Hours: TBA Year: 1997 approx. Air Compressor Make: Sullair 1,800 CFM 200 PSI Booster Make: Aerial 1,800 RPM 500 PSI Air Compressor / Booster Skid Mounted Package Location: Western Australia Learn More

Machine hours	TBA	KILOMETERS	N/A
YEAR	1997	BRAND	Sullair
LOCATION	Western Australia	MODEL	Compressor: 1,800 CFM / Booster: Aerial 500 PSI

Add to Wish List Add to Compare

Keypower 6V92TA1400 Skid Mounted Booster *Not Actual Photo of Unit* (FOR HIRE/RENT - POA) (hire-ehub3426)

For Hire

Make: Keypower Model: 6V92TA1400 Max Inlet Pressure: 2,413 kPa / 350 PSI Max. Delivery: 660 l/sec / 1,400 CFM Max. Discharge Pressure: 5,171 / 850 PSI Compression Ratio: 2:1 (Nominal) / 3:1 (Maximum) Bore: 57 mm Stroke: 127 mm Max. Operating Angle: 15 degrees Engine: Detroit 6V92TA Diesel *Not Actual Photo of Unit* Skid Mounted Booster Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Key Power
LOCATION	New South Wales, Australia	MODEL	6V92TA1400

Add to Wish List Add to Compare

2004 Cubex QXR 920 Track Mounted Surface Drill Rig ($185,000 ex GST) (sale-ehub3439)

For Sale

$185,000.00

Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn More

Machine hours	16,896	KILOMETERS	N/A
YEAR	2004	BRAND	Cubex
LOCATION	Western Australia	MODEL	QXR 920

Add to Wish List Add to Compare

FMC L1122 Horizontal Triplex Piston Pumps (POA) (sale-ehub3435)

For Sale

$0.00

Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	FMC
LOCATION	New South Wales, Australia	MODEL	L1122

Add to Wish List Add to Compare

Jacques 20x12 Two Jaw Opening 8 Tonne Jaw Crusher & Baxter 30x6 Jaw Opening Granulator (POA) (sale-ehub3432)

For Sale

$0.00

Jaw Crusher Make: Jacques Bin Capacity: 8 Tonne - 20x12 Two Jaw Opening - Vibrating Feed Bin - Discharge Conveyor - All Electric Run off 100 kVA Generator - Wired Ready to Start Condition: Well Maintained Granulator Make: Baxter - 30x6 Jaw Opening - Discharge Conveyor - All Electric Run off 100 kVA Generator Condition: Very Well Maintained Included Items; - Conveyor - Grizzly Screen - 7 Metre x 300 mm Conveyor Belt Location: Victoria, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Jacques / Baxter
LOCATION	Victoria, Australia	MODEL	20x12 Two Jaw Opening / 30x6 Jaw Opening

Add to Wish List Add to Compare

Sullair 900 CFM / 350 PSI Air Compressor & Air Research 1809 Booster Mounted on Rod Sloop (FOR HIRE/RENT - POA) (hire-ehub3431)

For Hire

Compressor Make: Sullair 900 CFM 350 PSI Booster Make: Air Research Model: 1809 - Mounted on Rod Sloop Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Sullair
LOCATION	New South Wales, Australia	MODEL	900 CFM / 350 PSI

Add to Wish List Add to Compare

Various Size, Shank, Head & Insert Halco & Karbo Drill Bits (POA) (sale-ehub3430)

For Sale

$0.00

74x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Canada	MODEL	Halco Mach 44/303 & Karbo

Add to Wish List Add to Compare

Custom 600 RRD Track Mounted Drill Rig (POA) (sale-ehub3428)

For Sale

$0.00

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Home Made
LOCATION	Canada	MODEL	600 RRD

Add to Wish List Add to Compare

2012 Sandvik DR580 Track Mounted Drill Rig ($285,000 ex GST) (sale-ehub3424)

For Sale

$285,000.00

Make: Sandvik Model: DR580 Year: 2012 Hours: 14,931 Midlife Hours: 12,208 (Engine Repairs) - Starter Motor @ 12,637 hours - Rotary Head Changeout @ 11,319 hours - Air Compressor 1350 CFM / 500 PSI Change Out @ 11,013 hours Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2012	BRAND	Sandvik
LOCATION	Western Australia	MODEL	DR580

Add to Wish List Add to Compare

2022 Atlas Copco X-Air 1,100 CFM / 380 PSI Portable Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3425)

For Hire

Make: Atlas Copco Model: X-Air Year: 2022 Hours: 200 1,100 CFM 380 PSI Portable Air Compressor Location: New South Wales, Australia Learn More

Machine hours	200	KILOMETERS	N/A
YEAR	N/A	BRAND	Atlas Copco
LOCATION	New South Wales, Australia	MODEL	X-Air

Add to Wish List Add to Compare

2019 Atlas Copco DrillAir XRYS 1260 CD7 1,260 CFM / 550 PSI Skid Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3424)

For Hire

Make: Atlas Copco Model: DrillAir XRYS 1260 CD7 Year: 2019 Hours: 2,000 1,260 CFM 550 PSI Skid Mounted Air Compressor Location: New South Wales, Australia Learn More

Machine hours	2,000	KILOMETERS	N/A
YEAR	N/A	BRAND	Atlas Copco
LOCATION	New South Wales, Australia	MODEL	DrillAir XRYS 1260 CD7

Add to Wish List Add to Compare

Air Research ARC 1809/1310 1,800 CFM / 900 PSI Skid Mounted Booster (FOR HIRE/RENT - POA) (hire-ehub3423)

For Hire

Make: Air Research ARC Model: 1809/1310 Hours: 900 Engine: Detroit 8V92TA Power: 210 HP Weight: 2,400 kg 1,800 CFM 900 PSI Dimensions Length: 1,900 mm Width: 1,500 mm Height: 2,050 mm Skid Mounted Booster Location: New South Wales, Australia Learn More

Machine hours	900	KILOMETERS	N/A
YEAR	N/A	BRAND	Air Research
LOCATION	New South Wales, Australia	MODEL	1809/1310

Add to Wish List Add to Compare

20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3420)

For Hire

Tray Length: 12 m (Not Including Power Pack) Width: 3.2 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	New South Wales, Australia	MODEL	N/A

Add to Wish List Add to Compare

Search results for: 'motor hire for size by open only'

AUSTRALIA WIDE SERVICE

REQUIRE ASSISTANCE - HAVE A QUESTION?

EQUIPMENT FOR HIRE OR FOR SALE