Search results for: 'track chủ negoti sub min hire tg:e10838 us'
- Related search terms
- hire for sale dallas tx
- hire for sale colorado springs
- hire for sale mclean screen manassas va
- hire to enabled 100 hz and adaptive sinc
- hire to enabl 100 hz and adaptive side
-
Schramm 685 Track Mounted Drill Rig with Onboard Air Compressor ($1,200,000 ex GST) (sale-ehub3582)For Sale$1,200,000.00Rig Make: Schramm Model: 685 Year: 1996 Hours: 2,500 (Since Rebuild) Engine: Cummins K19 Accessories; - FOPS - Rod Rack - 4x Levelling Jacks - In Mast Make/Break Rod Break Out System - Rotating Cyclone Set Up on Metz Manipulator - Airdrill Maker Breaker - Air Spanner - KL Rod Handler Set to 4.5" Inch Pipe - Dual RC Swivel and Auto Blow Down - ROPS Air-Conditioned Drillers Cabin - Complete Re-Hose 11/25 - Fire Suppression Air Compressor Make: Sullair 1,150 CFM / 500 PSI Water Capacity: Approx. 500 Litres Dimensions; Height: 4.6 m Width: 4.0 m Track Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 2,500
KILOMETERS N/A YEAR 1996
BRAND Schramm
LOCATION Queensland, Australia
MODEL 685
-
2007 Hydrapower Explorer 500 Drill Rig Mounted on 2005 MAN M2000 Truck (POA) (sale-ehub3938)For Sale$0.00Rig Make: Hydrapower Model: Explorer 500 Year: 2007 Hours: 6,700 Engine: Cummins CPAK-6BTA Turbo After Cooled 6 Cylinder (176 HP @ 2,500 RPM) Rig Hydraulics; - Sauer Danfoss proportionally controlled control valves - Sauer closed loop pump on Rotary Drive Sauer open loop pump on auxiliary functions Rotary Drive; - Hydrapower Gearbox - Steel Casing with floating hollow spindle and hydraulic head lock and swing - Two Speed, 0 - 225 RPM & 0 - 966 RPM - Low speed torque to 4150 Nm - High speed torque to 966 Nm Head Travel: 6.8 m Main Winch; -Max. Pull: 4,200 kg -Max. Line Speed: 28 m/min Wireline Winch; Max. Pull: 780 kg Max. Line Speed: 83 m/min Pulldown; - Electrically controlled with dial for speed control Pull Down Capacity: 7000 kg Pull Out Capacity: 11,500 kg Mast; - Fitted with 2.0 m mast dump for angle drilling - Standard length is 10 m, supplied with hydraulically operated breakout spanner and top pulley swivel - Supplied with hydraulic circuit with quick-connect couplings for optional breakout table - Brakeout Table with Split Type Table - Bean Pump - 5x6 Gardner Denver Mud Pump (Hydraulic Driven) Truck Make: MAN Model: M2000 Year: 2005 KM's: 75,000 - Not registered - Some gearbox problems Truck Mounted Drill Rig Location: New South Wales, Australia Learn MoreMachine hours 6,700
KILOMETERS 75,000
YEAR 2007
BRAND Hydrapower
LOCATION New South Wales, Australia
MODEL Explorer 500
-
Exploration Drill Masters EDM MKII Track/Jack Up Rod Sloop Mounted Rod Feeder (EOI) (sale-ehub3931)For Sale$0.00Make: Exploration Drill Masters EDM Model: MKII Hours: 539 Engine: Hatz 1D90V Max. Load Capacity: 15,000 kg Hydraulics: Rexroth 28CC Piston Pump - Capacity for 1,900 m NQ Drill Pipe in 6 m Lengths - 270 Degree Range of Movement - 2.1 m Arm Displacement - 4.770 m Roller Travel Roller Tramming Speed: 0.79 m/s Track Base Make: Sejin Model: 2P254075 Max. Speed: 0.6 km/h - 2 Speed Jack Up Base - 4 Extending Jack Legs - 1.8 m Jack Up Height Dimensions; Overall Platform Length: 8,460 mm Overall Platform Width: 2,500 mm Overall Height: 2,470 mm Empty Weight: 13,000 kg Clearance When Jacked Up: 1,650 mm Track Mounted Jack Up Rod Sloop Rod Feeder Location: Western Australia Learn MoreMachine hours 539
KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL EDM MKII
-
Mud Puppy MP-255-2SC Mud Recycler Pump Mounted on Hydraulic Jack Up Rod Sloop (FOR HIRE/RENT - POA) (hire-ehub3349)For HireMake: Mud Puppy Model: MP-255-2SC - Mounted on Hydraulic Jack Up Rod Sloop Mud Recycler Pump Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Mud Puppy
LOCATION New South Wales, Australia
MODEL MP-255-2SC
-
Dust Suppression (FOR HIRE/RENT - POA) (hire-ehub3874)For HirePower (kW): 9-13, 30-50, 58-90, 150 Min. Flow (m3/hr): 1.5-6, 4.8-9, 8-15, 15-24 Throw (m): 30-50, 70-100, 120-150, 250 Oscillation (Deg): 0-360 Throw Angle (Deg): -5 to +45 - Stockpiles - Mine Blast Dust - Conveyor Discharge Chutes - Dust Hoppers - Crusher Machinery - Loading and Unloading Trucks - General Pollution - Airborne Dust - Construction Sites - Odor Control and Management Dust Suppression Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
Water Evaporator (FOR HIRE/RENT - POA) (hire-ehub3873)For HireModel: OIE187 Cannon Fan: 425,000 m3/hr / Dual Fiber Glass PAG Impeller Discharge Hose: 1.5" Inch & 500 PSI High Pressure Pump: 7-8 Bars Discharge Fan Power: 130 kW Pump Power: 55 kW Pump Flow: 150 m3/hr Evaporation Rate: 24.98 lps @ 60% Daily Operating Time: 10 Hours + - SS Ring with Nozzles - Spiral Nozzle SS316 - Fan Safeguard Mesh - Control Panel Generator Make: Shanghai Stamford Brushless Engine: Dongfeng Cummins Control System: HGM6110 Large Screen Radiator: Engine Standard Matching Fuel Tank: 1,000 Litres Battery: 2x Camel 12V Weight: 6,000 kg approx. - Waste Water Handling - Dewatering Process - Tailing Dams - Water Production - Rainstorm Water Clearance Water Evaporator Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL OIE187
-
Dust Suppression (POA) (sale-ehub3874)For Sale$0.00Power (kW): 9-13, 30-50, 58-90, 150 Min. Flow (m3/hr): 1.5-6, 4.8-9, 8-15, 15-24 Throw (m): 30-50, 70-100, 120-150, 250 Oscillation (Deg): 0-360 Throw Angle (Deg): -5 to +45 - Stockpiles - Mine Blast Dust - Conveyor Discharge Chutes - Dust Hoppers - Crusher Machinery - Loading and Unloading Trucks - General Pollution - Airborne Dust - Construction Sites - Odor Control and Management Dust Suppression Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
2005 Epiroc DM-L Track Mounted Rotary Drill Rig (POA) (sale-ehub3867)For Sale$0.00Make: Epiroc Model: DM-L Year: 2005 Hours: 8,453 Engine: Cummins QSX15 Tier 3 - 33.5" Inch Triple Grouser Tracks - 30' Foot Tower Carousel - Can be set up for 5.5" Inch or 6.25" Inch Rods - 4 or 5 Pieces Air End Track Mounted Rotary Drill Rig Location: United States of America Learn MoreMachine hours 8,453
KILOMETERS N/A YEAR 2005
BRAND Epiroc
LOCATION United States of America
MODEL DM-L
-
2020 Caterpillar CAT D10T2 Track Mounted Bulldozer ($1,343,750 ex GST) (sale-ehub3866)For Sale$1,343,750.00Make: Caterpillar Model: D10T2 Year: 2020 Hours: 9,500 Includes; - SU Blade & Single Shank - Platforms & Walkways - Self-Closing Gates - Battery & Starter Isolation - Turbo blanket Isolators - Ground & Cab Mounted E-Stops - Fire Suppression - 2x 9kg Fire Extinguishers - Auto Grease System - Platform /Walkway - AM/FM Radio - UHF - Breath Safe - Fast Fuel Fit - LED work lights - Poly Sign Box - Reflective Tape - Caterpillar Fast Fuel System - Good A/C Track Mounted Bulldozer Location: Queensland, Australia Learn MoreMachine hours 9,500
KILOMETERS N/A YEAR 2020
BRAND Caterpillar CAT
LOCATION Queensland, Australia
MODEL D10T2
-
2009 Caterpillar CAT D10T Track Mounted Bulldozer (POA) (sale-ehub3864)For Sale$0.00Make: Caterpillar CAT Model: D10T Year: 2009 Hours: 12,000 Track Mounted Bulldozer Location: Brazil Learn MoreMachine hours 12,000
KILOMETERS N/A YEAR 2009
BRAND Caterpillar CAT
LOCATION Brazil
MODEL D10T
-
Homemade Stabilizer (POA) (sale-ehub3861)For Sale$0.00Make: Homemade Condition: Used Stabilizer Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Home Made
LOCATION Western Australia
MODEL N/A
-
7" Inch Hammer (POA) (sale-ehub3859)For Sale$0.00Size: 7" Inch - Bit Ring - Drive Sub - Well Looked After Hammer Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL 7" Inch
-
2x Cross Over Subs (POA) (sale-ehub3858)For Sale$0.00Quantity: 2 Condition: Good Cross Over Sub Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL N/A
-
4x 9" Inch 380 IR Shank Hammer Drill Bits (See Description) (sale-ehub3854)For Sale$0.00Bit 1 Size: 9" Inch - 380 IR Shank - Welded Legs Condition: Used Price: $880 ex GST Bit 2 Size: 9" Inch - 380 IR Shank Condition: Never Used Price: $1,100 ex GST Bit 3 & 4 Size: 9" Inch - 380 IR Shank Quantity: 2 Condition: Good Price: $1,100 ex GST each Hammer Drill Bit Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL 9" Inch
-
7" Inch PDC Drill Bit (POA) (sale-ehub3853)For Sale$0.00Size: 7" Inch - PDC Condition: Used Drill Bit Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL 7" Inch
-
12 1/4" Inch TCI Rock Roller Bit (POA) (sale-ehub3852)For Sale$0.00Size: 12 1/4" Inch - TCI - Sealed Bearing Condition: Used Rock Roller Bit Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL 12 1/4" Inch
-
2007 Atlas Copco ROC L8-64 Track Mounted Reverse Circulation Drill Rig ($195,000 ex GST) (sale-ehub3846)For Sale$195,000.00Make: Atlas Copco Model: ROC L8-64 Year: 2007 Hours: 5,380 (Approx. 22,000 total hours) Engine: Caterpillar CAT C13 - Atlas Copco XRV9 Air Compressor - Extensive Parts and Consumables Available (not included but can be negotiated) Track Mounted Reverse Circulation Drill Rig Location: Western Australia Learn MoreMachine hours 5,380 (22,000)
KILOMETERS N/A YEAR 2007
BRAND Atlas Copco
LOCATION Western Australia
MODEL ROC L8-64
-
2016 Hanjin D&B-8D Track Mounted Drill Rig ($107,500 ex GST) (sale-ehub3839)For Sale$107,500.00Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - 1x Set of NQ Jaws *New* - 1x Set of HQ Jaws *New* - Cameron Water Gauge *New* - Wrap Around Mast - SPT Hammer Included - Rod Racks - Suction Hose and 2x Double Braid 1" Inch Duffield Bypass Hoses - 5x 100 mm Augers and 1x Bit Plus Drive Sub - 1 1/2" Inch Centrifugal Pump and Hoses - Plus Camlocks *All New* - 36" Inch & 24" Inch Stilsons - Chain Wrench - 1.5 Metre NMLC Core Barrel Plus 5x 3 Metre NQ Rods - 2x Mud Tanks - 7x5' Foot Box Trailer Tracked Mounted Drill Rig Location: New South Wales, Australia Learn MoreMachine hours 5,800
KILOMETERS N/A YEAR 2016
BRAND Hanjin
LOCATION New South Wales, Australia
MODEL D&B-8D
-
Sandvik D90 Rotary Drill Head + Shock Sub & Hyd Motors ($19,500 ex GST) (sale-ehub3805)For Sale$19,500.00Make: Sandvik Model: D90 - Shock Sub - Hyd Motors Rotary Drill Head Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Sandvik
LOCATION Western Australia
MODEL D90
-
Edson Versadrill 300 Drill Rig Mounted on Toyota Landcruiser Ute ($125,000 ex GST) (sale-ehub3781)For Sale$125,000.00Rig Make: Edson Model: Versadrill 300 Year: 1996 Engine: Hatze - 6x6 Multidrive Technology - Rotation head MR260 Rotation hollow spindle, single speed, dial in, rotation head around 120 rpm - Winching gear on back of mast for hollow augering - Can do diamond drilling if you were to change the hydraulic motor - Dump Mast - Near New Hydraulic Pump - 4x Leveling Jacks - Currently doing 80mtr holes at 4.5” - Client used to aircore with it, but currently set up doing mud - Used to do a lot of Geotech work, 6” hollow augering - Southern Cross Mud pump on the side - 3.2 mtr Stroke - 3 mtr Rods - Extension arm to run 6mtr casing into the ground Ute Make: Toyota Model: Landcruiser Year: 1990 KM's: 107,000 Ute Mounted Drill Rig Location: Western Australia Learn MoreMachine hours N/A KILOMETERS 107,000
YEAR 1996
BRAND Edson
LOCATION Western Australia
MODEL Versadrill 300
Filter