Search results for: 'wheel to load for rent for spare'

Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn More

Make: Cleveland Model: 400W Engine: Caterpillar CAT 3306 Quantity: 2 - Fully Guarded - Full Set of Buckets - Parts Including: - 20' Foot Container with Parts & Spare Engine (To be sold only internationally, not available to be sold in Australia) Trenchers Location: Queensland, Australia Learn More

Make: Ariel Model: JGP/2 Year: 1996 Stroke In: 3.00 Max Rated Speed: 1800 RPM Min Rated Speed: 900 RPM Max Total Rod Load (Compression + Tension): 12,000 lbs Engine: Caterpillar Skid Mounted Booster Location: New South Wales, Australia Learn More

Make: Kelsey Hayes Fabco Model: TC140 Year: 1981 Serial No: 525F81 Fabco No: 872091003 Condition: Excellent Working Order *Suits all wheel drive Kenworth, Mack, White or American trucks* Location: Western Australia Learn More

W446 Mud Pump Engine: Silenced Caterpillar CAT C-15 Oil & Gas Compliant Trailer Type: Tandem Semi Trailer Year: 2013 Aggregate Trailer Mass: 27,000 kg Tare: 22,320 kg Registered - Expiry Date: 06/08/2020 *For more information, please contact us* Location: Queensland, Australia Learn More

Make: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Has a stand alone fuel tank* Location: Queensland, Australia Learn More

Make: Air Research Model: 8v92 Engine: Detroit Diesel 8v92TA @ 230 HP / 1,800 RPM / 12 Volt 2 Stage Reciprocating Pressure: 1,000 PSI / 2,200 CFM Inlet Pressure: 350 HP Direct Drive: 1,800 RPM Dimensions (L x W x H): 2.350 m x 1.1700 m x 2.000 m Weight: 3.0 Tonne Wet Skid Mounted Booster Location: Queensland, Australia Learn More

Make: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Doesn't have a stand alone fuel tank* Location: Queensland, Australia Learn More

Make: Sullair Model: 900XHH / 1150XH Hours: Approx 2,500 / Approx Less than 500 CFM: 900 / 1150 PSI: 500 / 350 Engine: Caterpillar C-15 ATAAC Engine Displacement: 928 in3 / 15.2 cc Cylinders: 6 Cycles: 4 Bore & Stroke: 5.40 x 6.7 in / 137 x 171 mm RPM: 1800 Power: 540 hp / 403 kW Tri-Axle Mount (DTQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 92 inch / 2,337 mm Less Running Gear (DLQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 83 inch / 2,108 mm 4 - Wheel Mount (DWQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 99 inch / 2,515 mm Track Width Tri-Axle Mount (DTQ) 77 inch / 1,956 mm 4 - Wheel Mount (DWQ) 78 inch / 1,981 mm Weight: 16,040 lb / 7,276 kg *For more information, please contact us* Location: Queensland, Australia Learn More

Make/Model: DW400C Year: New (2022) Machine Hours: 0 Engine: Cummins 6LTAA8.9 @ 360 HP Includes: - Sauer Danfoss Load Sensed Piston Pumps - Sauer Danfoss PVG Valves - 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque - Sliding Head - Tilting Head - Floating Spindle with 2.5" Waterway - 25 Tonne Pullback - Dump Mast (Long Stroke) - 20" Inch Diameter Through the Work Table - Breakout Ram - 8 7.5" Inch Mud Pump (Made in India) - 10 Tonne Single Pull Winch Mounted on Top of Mast - Manuli Hoses on All High Pressure Lines - 4 x Enclosed Outriggers - Can extend for ease of loading onto a lowbed trailer *Can easily be converted to RC due to the large thru-hole in the rotation head* *Can be delivered on rails for mounting onto any truck* Location: Philippines Learn More

Make: Cascade Model: 132HWF1840016 Year: 2010 Mass: 861 kg Hor. C of G: 301 mm Vert. C of G: 158 mm ET (LL): 255 mm Capacity at Load Centre: 4000 kg @ 600 mm S/N: 198786 - Euro Quick Hitch - Hydraulic Clamping Forks - 4 T rated Condition: Good and Working Location: Queensland, Australia Learn More

Make: Sullair Model: 900XHH / 1150XH Engine: Caterpillar CAT Skid Mounted Air Compressor Location: Queensland, Australia Learn More

Terex Off-Highway Dump Trucks TR60 Make: Terex Model: TR60 Hours: Various (can provide more information) Year: 2011 & 2012 Quantity: 18 Pay-loading: 55 T TR50 Make: Terex Model: TR50 Hours: Various (can provide more information) Year: 2009 Quantity: 10 Pay-loading: 45 T Location: China Learn More

Make: KRUPP Model: SCHRS710/1x15 Year: 1998 Dimensions (m): 41 x 10.5 x 10 Total weight (tons): 540 Main technical performance: Installed power: 1300KW Production capacity: 3100m3/h Number of buckets: 12 Each bucket volume: 0.71 m3 Bucket wheel diameter: 8.2 m Receiving arm length: 16 m Discharge arm length: 25 m Height of excavation: 15 m Digging depth: 1 m Walking speed: 9 m/min Bucket rotation speed: 6.08 r/min Grade at work: 1:20 Climb when walking: 1:10 Grounding average specific pressure during work: 113 kpa Maximum grounding specific pressure: 193 kpa Condition: Good Location: China Learn More

Make: Bucyrus Erie Engine: CAT 4 Cylinder Diesel Condition: Good Exterior Colour: Yellow - Steel Elevated Platform - Landing Gear Levelling System - 3/4" Inch Casing Line - The rig last drilled a 120m 20" Inch irrigation bore and has large heavy sinker bar - A complete set of tools a 6 ton truck load drill bits from 9" Inch to 22" Inch. - Tool break out gear, fishing tools, bailers, etc. - For the rig, dolly all all of the tooling Drill Rig Location: New South Wales, Australia Learn More

Total tank capacity: 79.5kL (500BBL) Road trainable Full-size submarine access door into tank Ladder accessible viewing platform to observe inflows and fluid heights Sight glass fluid level indicator Sunken suction sump with strainer grate Rugged 200 x 100 RHS perimeter frame 6mm crimped walls, 10mm floors Tandem axle, leaf spring suspension Internal surfaces coated with corrosion resistant paint *For any additional information, please contact us* Learn More

Make: UNKNOWN Model: Wheel Loader Tyre Chains Year: Unknown Subcategory: Loader Tyres Condition: Used Tyre chains to suit CAT 994 Loader Set of x2 Front Used. Approx 75% remaining Location: Western Australia Learn More

Make: Caterpillar Model: 994 Year: 1993 Condition: Used - Full Mine Spec Wheel Loader Location: Western Australia Learn More

FOR HIRE/RENT - Tracked Compressor/Booster Package - Keypower 6V92 1400cfm 700PSI Booster - Atlas Copco XRVS1000cfm 350PSI - Remote controlled, self-propelled track base - Condition: Excellent Learn More

Make: Cortech Model: CSD3000 CSD3000 core drilling rig is specially designed for diamond core drilling. It provides precise control on the drilling capacity. The drill head is designed to slide and dump, together with the full angle rotation structure for drill mast, it effectively reduces manual inputs and improves efficiency. The hydraulic legs are stretchable, which broaden the bearing surface, and ensure outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • 9 meters rod pulling largely improves drilling efficiency due to rod collection frame design on mast • The design of side shift by hydraulic of rotation head largely reduces working tensions and guarantees personnel safety • Multi-pressure gauge reads real time pressures for kinds of major components • High/low speed control of main winch largely meets speed requirements for rods handling • Stepless control of mud pump flow facilitates various drilling needs for mud • telescopic mast greatly reduces working tensions and improves drilling efficiency. • Horizontal extension of jack legs guarantees firm rig standing on the ground. • Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • Independent tramming cab set in front provides full view for easy rig walking and driver’s safety • Mast dumping guarantees perfect stability during drilling; • Independent hydraulic jacks facilities leveling of the rig; • Great convenience of control of feed pressure; • Standardized parts and components make maintenance and repairing easy; • Real time reading of drilling data on gauges on the control panel; • Mud pump and mixer powered by the rig’s hydraulic system, controlled directly on the rig’s panel; • Top grade hydraulics of European origin; • Experienced engineers plus adequate spare parts ready to provide full service. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 3,000m 2,300m 1,600m 1,050m Hydraulic System Pressure 28MPa Cooling Air Cooled Power System Model Cummins 6LTAA8.9-C325 Type Turbo Charged Power 239KW Engine RPM 2,200rpm Drill Head Max Torque 8,170Nm Max Rotation ,RPM 1,250rpm Feed Stroke 3,450mm Max Inside Diameter 117mm Max Pull /Max Push 250KN/110KN Main Winch Max Pull 181.44KN Pulling Speed Low:33m/min High:70m/min Rope Diameter 24mm Rope Length 41m Wireline Winch Max Pull 18KN(bare drum) Pulling Speed 150m/min(bare drum) Rope Diameter 6.6mm Rope Length 2,500m Mast Length 11.2-13.7m Drilling Angle 45°-90° Dump Length 1.4m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 11,240×2,310×3,330mm Total Weight 23.5t Diamond Coring Drill Rig Location: China Learn More