Search results for: 'pump secretary of state'

Model: FH2000 Engine: Caterpillar CAT C7.1 Electronic @ 205 kW (275 HP) Pull Back: 280 kN (62,900 lbf) Limited Speed 244.8 kN (55,033 lbf) Full Speed Pull Down: 115 kN (25,853 lbf) Water Pump Options; - Standard FMC W1122BCD 140 lpm @ 1,000 psi - FMC L11-18SC 265 lpm @ 1,800 psi Depth Capacity; NQ Core: 2,030 m HQ Core: 1,377 m Open Hole 3 1/2" Inch Rods: 900 m RC 4 1/2" Inch: 600 m (Nominal) Traverse Speed; Up: 50 m/min (164 ft/min) Down: 39 m/min (128 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 14,324 Nm (10,564 ft/lb) in low gear - 0-1,500 RPM Speed Range - Bosch Rexroth A6VM160 Variable Displacement Motor - High Gear 3:1 & Low Gear 19.57:1 ratios - Adjustable Rotation Torque Control - Infinitely Variable Rotation Speed Control - Floating Spindle 3 1/2" Inch API IF Pin Thread - Pressure Lube Bearings and Gears with filtered and cooled lubrication oil system Main Winch; - Maximum Pull: 156 kN (35,048 lbf) - 120 m/min (394 ft/min) - Mast Top Mounted - Electronic Winch Travel - Fail to safe - 28 mm Main Winch Rope - Safety Factor 3.35:1 (exceeds BS/EN791) - 1x Bosch Rexroth A6VM160 Variable Displacement Motors - 1x Brevini Planetary Reduction Gear Boxes - 1x Multi Disc Brake Units - Fail Safe Spring Activated - Hydraulic Pressure Release Wireline Winch; - Mast Mounted - Maximum Pull: 25 kN (5,617 lbf) - Rope Capacity: 2,100 Metres x 8 mm Rope - Adjustable Position Wireline Spooler - Maximum Speed: 450 m/min (1,476 ft/min) - Adjustable Pull Limiter - Safety Stop System - Wireline Depth Counter as an option New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Model: FH1300 Engine: Caterpillar CAT C7.1 Electronic @ 187 kW (250 HP) Pull Back: 115 kN (25,853 lbf) Actual Pull Down: 70 kN (15,736 lbf) Water Pump Options; - Standard FMC W1122BCD 140 lpm @ 1,000 psi - FMC L11-18SC 265 lpm @ 1,800 psi Depth Capacity; NQ Core: 1,300 m HQ Core: 885 m Open Hole 3 1/2" Inch Rods: 380 m RC 4 1/2" Inch: 220 m (Nominal) Traverse Speed; Up: 60 m/min (196.8 ft/min) Down: 56 m/min (183.7 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 8,087 Nm (6,111 ft/lb) in low gear - 0-1,500 RPM Speed Range - Two Speed Gearbox - High Gear 3.04:1 & Low Gear 12.61:1 ratios - Variable Displacement 160cc Hydraulic Motor - Adjustable Rotation Torque Control - Infinitely Variable Rotation Speed Control - Floating Spindle 3 1/2" Inch API IF Pin Thread - Pressure Lube System with Cooler and Filter Main Winch; - Maximum Pull: 100 kN (10,000 lbf) - 120 m/min (393 ft/min) - Mast Top Mounted - Electronic Winch Travel - Fail to safe - Main Winch Rope - Safety Factor to Meet BS/EN791 - Planetary Reduction Gear Box & Brake - Variable Displacement Hydraulic Motor Drive Wireline Winch; - Deck Mounted - Maximum Pull: 15 kN (3,372 lbf) - Rope Capacity: 1,400 Metres x 6 mm Rope - Adjustable Position Wireline Spooler - Maximum Speed: 450 m/min (1,476 ft/min) - Adjustable Pull Limiter - Safety Stop System - Wireline Depth Counter as an option New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Model: FH1000 Pull Back: 97 kN (21,783 lbf) Pull Down: 45 kN (10,116 lbf) Water Pump: Standard FMC W1122BCD 140 lpm @ 1,000 psi Depth Capacity; NQ Core: 1,150 m HQ Core: 786 m HWT Core: 518 m RC 4" Inch: 198 m (Nominal) Engine Options; - John Deere Power Tech 6.8L @ 155 kW (208 HP) - Caterpillar CAT C6.6 ACERT - Cummins B5.9-173 Traverse Speed; Up: 47 m/min (154 ft/min) Down: 30 m/min (98 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 5,965 Nm (4,400 ft/lb) in low gear - 0-1,500 RPM Speed Range - Two Speed Gearbox - 100% Theoretical Main Winch; - Maximum Pull: 88.4 kN (19,870 lbf) - 55 m/min (180 ft/min) - Mast Top Mounted - 1x Multi Disc Brake Unit - Fail Safe Spring Activated - Hydraulic Pressure Release - Main Winch Rope - Safety Factor to Meet BS/EN791 - 6 Metre Rod Pull Capacity Wireline Winch; - Deck Mounted - Maximum Pull: 13.5 kN (3,044 lbf) - Rope Capacity: 1,400 Metres x 6 mm Rope - Maximum Speed: 342 m/min (1,124 ft/min) New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Make: Gardner Denver Model: GD 2500 Year: 1993 Hours: 3,422 Duplex Mud Pump Trailer Mounted Drill Rig Location: New South Wales, Australia Learn More

Drill Rig Make: Titan Model: 1000 Year: 2009 Engine: Cummins QSC 8.3 & QSB 4.5 Rotation Torque: 7,500 Nm & 1,100 Nm Auger Speed: 0-180 & 0-980 RPM Pullback Force: 15,000 kg - Onboard American Bean Pump - Onboard Cyclone & 75/25 Splitter Truck Make: Volvo Model: FL10 Year: 1990 KM's: 457 Type: 8x4 GVM: 30,000 kg Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Caterpillar Capacity: 6.6 Litre - Hydraulic Pump (New & Unused) - Oil Cooler - Fuel Tank in Base Engine Location: Queensland, Australia Learn More

Make: Iveco Model: Eurotech Year: 2000 KM's: 83,254 Type: 8x4 GVM: 31,000 kg Cab Chassis - 120 m of 4" Inch Metzke Drill Pipe - 2,000 Litre Double Bunded Diesel Tank - 9,000 Litre Water Tank - 12 V Diesel Transfer Pump - Diesel Pump Tools + More - Hose Reel Support Truck Location: Queensland, Australia Learn More

Make: Gardner Denver Model: 8x5 - Hydraulic Driven Trailer Mounted Mud Pump Location: New South Wales, Australia Learn More

Make: Hydco Model: 1000H Year: 2008 Hours: 4,304 Engine: Cummins 6CTA Onboard Air Compressor: Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Compressor Hours: 819 Compressor Engine: Caterpillar CAT C15 - Setup for mainly RC however has the diamond capabilities & equipment - Rig has recently been completing RC holes to depths of 425 m coupled with the Aux Compressor Kit giving 2,400 CFM / 1,000 PSI Diamond Drilling Capacity; HQ: 1,000 m NQ: 1,500 m PQ: 600 m Features; - Harlsan Auto Blow Up and Blowdown - KL Rod Handler - Hydraulic Breakouts - Hydraulic Spanners - Safety Cage with Interlock - Quick Access Mountable Stuffing Box Assembly - Fire Suppression - Dust Suppression - FMC Bean Pump for Diamond Drilling - FMC Dual Pump for Water Injection - Hydraulic Foot Clamps - Diamond Drilling Safety Cage - Diamond Drilling Platform - Storage Area with Safety Rails and Access Ladders - Refurbished Cyclone - New Cone Splitter - New Track Chains and Rollers - 400x Metres of 4.5" Inch Remet Rods - Airdrill 670 Hammers & Bits - Other specific RC Gear Track Mounted Drill Rig Location: Western Australia Learn More

Truck Make: International Model: T2700 Year: 1994 Engine: Cummins 350 HP KM's: 925,000 Type: 8x4 Grout Unit Make / Model: Drillex Year: 2011 Hours: Less than 5,000 - 800 m Capability - HIAB Crane Fix for Handling 1 Tonne bag of Cement Powder - 4,000 Litre Mixing Tank and Hopper - Large Capacity Mono Pump - 10,000 Litre Flat Bed Water Tank - 8 Tonne Cement Storage - PTO Driven Hydraulics Bulk Handling Self-Contained Grouting Rig Location: Queensland, Australia Learn More

Make: Gardner Denver Model: PZ-7 Year: 2014 - Triplex w/ Forged Steel Fluid End & Quick Change Caps - 5M Pulsation Dampener - Oteco 3" Inch Shear Relief Valve - Pressure Gauge - Mission 6x5 Charge Pump - Fitted with 7" Inch Liners & Pistons - No Engine or Transmission Condition: Good Skid Mounted Mud Pump Location: United States of America Learn More

Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn More

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

- Set Up for Testing - Reel with 110 Metres of New 50 mm Poly Pipe - New Stainless Steel 4 mm Cable - V Box Weir - Control Box - New Star-Rite L90 HF550 Pump and Motor Condition: New - Never Used Submersible Bore Pump Location: New South Wales, Australia Learn More

Make: Isuzu Model: F3 FVZ 1400 Year: 2004 KM's: 86,962 GVM: 24,000 kg - 5,000 Litre Diesel Tank - 3,000 Litre Water Tank - With Pro Hydraulic Pumps and Reels Support Truck Location: Western Australia Learn More

Make: UDR / Sandvik Model: 1000 / DE840 Year: 2005 Engine: Cummins 6CTA8.3 - Hydraulic Rod Clamp - Top Drive Rotary Head - Hollow Floating Spindle - Onboard FMC W1122 Bean Pump - Onboard Sullair 1150 CFM / 350 PSI Air Compressor - Still operational but due for a rebuild Includes; - Mast Dump - Rod Spinner - Sandvik DA554 Rod Handler - RC Sampling System - Fire Suppression Truck Make: MAN Type: 8x4 Truck Mounted Multipurpose Drill Rig Location: New South Wales, Australia Learn More

Model: Dino 250 Year: 2015 (Rebuilt) Hours: 7,119 Engine: Caterpillar CAT 3412 (Rebuilt) Includes; - Complete set of Drill Rods (200 Metres) - Drill Schematics and Parts List - Complete Service and Works History - All Serial # for Onboard Assets - Onboard Dry Element Dust Suppression Unit - Auto Fire Suppression - Hand Free AUSTEX Break Outs - Onboard Rod Handler - Onboard Rod Storage (150 Metres) - Haul Winch - Wireline Winch (350 Metres) - Remote Wireless Tramming Controls - New Metzke Rotating Splitter - Funk Box Drive - Danfoss and Rexroth Hydraulic Pumps Air Compressor Make: Sullair 900 CFM / 350 PSI - Refurbished Booster Make: Detroit Model: 6V92 Hours: 0 - Rebuilt Track Mounted Drill Rig Location: Western Australia Learn More

Drill Rig Make: NW Model: 500 - Heli / Man Portable 126 HP Included; - Hydraulic Control Panel - Hydraulic Reservoir c/w Oil to Water Heat Exchanger - 3x Kubota Turbo Charged Diesel Engines @ 42 HP - Light Weight 39 GPM Down Hole Pump - 220 Litre Fuel Tank and AL Stand Feed Frame Complete - Wireline Winch with 750 m 3/16" Inch Wireline Installed - Top Drive Drill Head with Adapter Sub for HWL Drill Rod - Two Rotation Motors for NWL & HWL Drill Rod - 4.5" Inch Rod Clamp c/w Jaws and Steadier Bearing for H & N Rods - Hydraulic Mud Mixer with Safety Shielding - Light Weight AL Mast Rotation Guard - Spline Wrench for Locking Head to change out Drilling Subs Heli Portable Drill Rig Package Location: Canada Learn More

Max Pressure: 200PSI - Diesel Engine - 12HP - 120-200 L/min flow Weight: 120 kg Lightweight Portable Mud Pump Location: New South Wales, Australia Learn More

Make: Gardner Denver Model: PZ8 Year: 2009 Diesel Driven Quantity: 2 Skid Mounted Mud Pumps Location: Queensland, Australia Learn More