Search results for: 'track chủ negoti sub mine hire tg:e10838 us'
- Related search terms
- hire for sale dallas tx
- hire for sale colorado springs
- hire for sale mclean screen manassas va
- hire to enabled 100 hz and adaptive sinc
- hire to enabl 100 hz and adaptive side
-
Edson Versadrill 300 Drill Rig Mounted on Toyota Landcruiser Ute ($125,000 ex GST) (sale-ehub3781)For Sale$125,000.00Rig Make: Edson Model: Versadrill 300 Year: 1996 Engine: Hatze - 6x6 Multidrive Technology - Rotation head MR260 Rotation hollow spindle, single speed, dial in, rotation head around 120 rpm - Winching gear on back of mast for hollow augering - Can do diamond drilling if you were to change the hydraulic motor - Dump Mast - Near New Hydraulic Pump - 4x Leveling Jacks - Currently doing 80mtr holes at 4.5” - Client used to aircore with it, but currently set up doing mud - Used to do a lot of Geotech work, 6” hollow augering - Southern Cross Mud pump on the side - 3.2 mtr Stroke - 3 mtr Rods - Extension arm to run 6mtr casing into the ground Ute Make: Toyota Model: Landcruiser Year: 1990 KM's: 107,000 Ute Mounted Drill Rig Location: Western Australia Learn MoreMachine hours N/A KILOMETERS 107,000
YEAR 1996
BRAND Edson
LOCATION Western Australia
MODEL Versadrill 300
-
Atlas Copco Pit Viper 275 Track Mounted Rotary and DTH Blasthole Drill Rig (POA) (sale-ehub3775)For Sale$0.00Make: Atlas Copco Model: Pit Viper 275 Hours: 19,237 Load Capacity: 75,000 lb Engine: Caterpillar CAT C32 - 4 Rod Carousel approx. 40 ft. - Atlas Copco QAS 45 Diesel Generator Dimensions; Length: 41ft. 6 inch / 63ft. 6 inch (Tower Down) Width: 18ft. 4 inch Height: 67ft. / 22ft 1 inch (Tower Down) Track Mounted Drill Rig Location: Canada Learn MoreMachine hours 19,237
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION Canada
MODEL Pit Viper 275
-
2011 Baifa BF-C375S Skid Mounted Generator ($11,000 ex GST) (sale-ehub3751)For Sale$11,000.00Make: Baifa Model: BF-C375S Year: 2011 Engine: Cummins Alternator: 375 kVA Stamford - Hardly used from new. Voltage: 415 V Power: 344 kVA / 275.2 kW Frequency: 50 Hz Current: 479 A - Paint faded and some corrosion developing in base of doors Condition: Low Hours - To go with GN Solids Control GN1000 Mud Cleaning Unit Skid Mounted Generator Location: Victoria, Australia Learn MoreMachine hours Low Hours
KILOMETERS N/A YEAR 2011
BRAND Baifa
LOCATION Victoria, Australia
MODEL BF-C375S
-
2011 Sandvik DX800 Track Mounted Drill Rig ($USD170,500) (sale-ehub3741)For Sale$0.00Make: Sandvik Model: DX800 Year: 2011 Engine Hours: 16,094 (Overhaul @ 16,026) Engine: Caterpillar CAT Percussion Hours: 8,518 Track Mounted Drill Rig Location: India Learn MoreMachine hours 16,094
KILOMETERS N/A YEAR 2011
BRAND Sandvik
LOCATION India
MODEL DX800
-
2016 Sandvik Ranger DX800 Track Mounted Drill Rig ($USD223,500) (sale-ehub3740)For Sale$0.00Make: Sandvik Model: Ranger DX800 Year: 2016 Hours: 17,100 Percussion Hours: 6,312 Track Mounted Drill Rig Location: India Learn MoreMachine hours 17,100
KILOMETERS N/A YEAR 2016
BRAND Sandvik
LOCATION India
MODEL Ranger DX800
-
2016 Sandvik Ranger DX800 Track Mounted Drill Rig ($USD210,100) (sale-ehub3739)For Sale$0.00Make: Sandvik Model: Ranger DX800 Year: 2016 Engine Hours: 13,670 Engine: Caterpillar CAT - Overhaul @ 9,933 Percussion Hours: 2,178 Track Mounted Drill Rig Location: India Learn MoreMachine hours 13,670
KILOMETERS N/A YEAR 2016
BRAND Sandvik
LOCATION India
MODEL Ranger DX800
-
2013 CE100 Diamond Core Track Mounted Drill Rig (POA) (sale-ehub3734)For Sale$0.00Make / Model: CE100 Year: 2013 (Rebuilt completed in 2022) Hours: 551 - Fully Re-Engineered - NDT Testing Completed - CT14 Hydraulic Operating System - NQ, HQ, PQ Drilling Capabilities - Up to date Safety Stop Systems - Engineered and compliant hand rail and walkway system and access ladders - Full lighting for N/S operations - Certified FOPS on driller platform - Running new Danfos Primary Hydraulic Pump at >3500 PSI direct from John Deere 127 HP - 165 HP engine - 5.7 Tonne Main Winch with certified 16mm Winch Rope - A new AMC Main Water Pump <1000 PSI with a PRV Valve Set @750 PSI - New Stryker 45ltr Certified Fire Suppression system installed - A UDR Rod Spinner has been engineered into mast structure for hands free operation of tripping rods - A hydraulic operated Breakout Spanner allows for breakout of rod joins or subs - Tungsten inserts interchangeable on Breakout Spanner - UDR Foot Clamp assembly added for ease of maintenance and clamping of rod string Diamond Core Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 551
KILOMETERS N/A YEAR 2013
BRAND CE100
LOCATION Western Australia
MODEL CE100
-
150N Track Mounted Multi Purpose Drill Rig (New Build - POA) (sale-ehub3725)For Sale$0.00Model: 150N Engine: John Deere / FPT Iveco / Kirloskar / Deutz Pull Up Force: 5,000 kg Pull Down Force: 3,750 kg Tool Winch Hoisting Capacity: 2,500 kg (Bare Drum) Wireline Winch Hoisting Capacity: 500 kg (Bare Drum) Diamond Core Drilling Capacity; NQ Size: 150 m HQ Size: 90 m PQ Size: 60 m Water Pump; Max Flow: 120 LPM Max Pressure: 30 bar Type: Triplex Piston Pump Track Mounted Multi Purpose Drill Rig Location: United Arab Emirates Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION United Arab Emirates
MODEL MD150N
-
1000N Track Mounted Drill Rig (New Build - POA) (sale-ehub3723)For Sale$0.00Model: 1000N Engine: John Deere FPT Kirloskar 4 Cylinder Turbo Charged @ 160 HP Pull Down Force: 8,000 kg Retract Force: 12,000 kg Max Torque: 5,000 Nm Max Rotary Speed: 1,250 RPM - CCTV Camera System - Tools Box - Safety Cage Diamond Core Drilling Capacity; N Wireline: 1,000 m H Wireline: 600 m P Wireline: 400 m Mud Pump; Max Flow: 140 LPM Max Pressure: 50 bar Triplex Piston Pump Track Mounted Drill Rig Location: United Arab Emirates Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION United Arab Emirates
MODEL 1000N
-
600N Track Mounted Drill Rig (New Build - POA) (sale-ehub3722)For Sale$0.00Model: 600N Engine: John Deere FPT Kirloskar 4 Cylinder Turbo Charged @ 160 HP Pull Down Force: 5,000 kg Retract Force: 7,000 kg Max Torque: 5,000 Nm Max Rotary Speed: 1,250 RPM Main Winch Capacity: 5,000 kg - CCTV Camera System - Safety Cage - Tools Box Diamond Core Drilling Capacity; N Wireline: 600 m H Wireline: 400 m P Wireline: 250 m Mud Pump; Max Flow: 140 LPM Max Pressure: 50 bar Triplex Piston Pump Track Mounted Drill Rig Location: United Arab Emirates Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION United Arab Emirates
MODEL 600N
-
Kitchen, Lunch/Work Space Room + Storage Dual-Axle Van (FOR HIRE/RENT - POA) (hire-ehub3708)For HireIncludes; - Kitchen - Lunch Room / Work Space Room - Storage Dual-Axle Van Location: Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Australia
MODEL Dual Axle
-
12x Rotacan 25 Foot Length 9 1/4" Inch OD & 1 1/4" Inch Beco 6 Drill Rod / Pipe ($USD6,000 each) (sale-ehub3704)For Sale$0.00Make: Rotacan Type: 9 1/4" Inch OD Thickness: 1 1/4" Inch Beco 6 Length: 25 Foot Quantity: 12 Condition: New (Without Use) Drill Rod / Pipe Location: Chile Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Rotacan
LOCATION Chile
MODEL 9 1/4" Inch OD
-
2,500 Litre Mobile Keg Beer & Chill Cold Room Galvanised Trailer ($19,500 ex GST) (sale-ehub3698)For Sale$19,500.00Generator: Honda 2kVA Dimensions; Length: 4 Metres (Inc. Trailer) Width: 1.6 Metres Height: 2.5 Metres Cold Room: 1.2 m x 1.2 m x 1.8 m - Fully Insured & Ready to Go - Mobile- Galvanised Trailer - 2,500 Litre Cold Room - Holds 4x Kegs with 4x Taps (2 Either Side) - Drip Trays on Both Sides - Extra Cold Room Storage - Pull Out Shade Cloths on Both Sides - Party Hire - Camping - Beach Party (Trailer is Purpose Built) - Functions - Corporate - Event Management - Fundraisers Mobile Keg & Chill Cold Room Trailer Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL 2,500 Litre Mobile Keg & Chill Cold Room Galvanised Trailer
-
2008 Furukawa HCE 1500 EDII Track Mounted Drill Rig ($255,000 ex GST) (sale-ehub3652)For Sale$255,000.00Make: Furukawa Model: HCE 1500 EDII Year: 2008 Hours: 9,615 Drifter Model: D751RP Drifter Hours: 4,546 Engine: Caterpillar CAT C9 Onboard Air Compressor: Airman - Main Pump was replaced under warranty in May 2015 Track Mounted Drill Rig Location: Australia Learn MoreMachine hours 9,615
KILOMETERS N/A YEAR 2008
BRAND Furukawa Drills
LOCATION Australia
MODEL HCE 1500 EDII
-
Mole Pioneer P400S 450HQ Drill Rig Mounted on Ford Cargo Series 6x4 Truck with Onboard W1122 Bean Pump (Open to Offers) (sale-ehub2080)For Sale$0.00Make: Mole Pioneer Model: P400S 450HQ Hours: 2,940 Engine: Perkins 119 kW Diesel - Onboard W1122 Bean Pump Rotation Head Model: KL400 Top Drive Stroke: 1,200 mm Drilling Angle: 90 degrees vertical to 45 degrees horizontal Drilling Depth Capacity B Size: 900 metres N Size: 700 metres H Size: 450 metres P Size: 275 metres Truck Make: Ford Model: Cargo Series KM's: 25,372 Year: 1985 Type: 6x4 Condition: Good *For more information, please contact us* Mole Truck Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 2,940
KILOMETERS 25,372
YEAR 1985
BRAND Mole Pioneer
LOCATION Queensland, Australia
MODEL P400S 450HQ
-
2012 Caterpillar MD6240 Track Mounted Drill Rig ($449,000 ex GST) (sale-ehub3626)For Sale$449,000.00Make: Caterpillar Model: MD6240 Year: 2012 Hours: 30,000 Engine Number: QST30-327139640 Serial Number: 2U65X75 Onboard Air Compressor: Sullair 1,500 CFM / 350 PSI - New GPS Fitted and included in price Track Mounted Drill Rig Location: Western Australia Learn MoreMachine hours 30000
KILOMETERS N/A YEAR 2012
BRAND Caterpillar
LOCATION Western Australia
MODEL MD6240
-
Hydrapower Footclamps ($3,000 ex GST) (sale-ehub3606)For Sale$3,000.00Make: Hydrapower - Rams have been resealed but never used Footclamps Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Hydrapower
LOCATION Queensland, Australia
MODEL N/A
-
2022 Wacker Neuson ET18 Track Mounted Excavator ($33,000 ex GST) (sale-ehub3598)For Sale$33,000.00Make: Wacker Neuson Model: ET18 Year: 2022 Hours: 23.6 Engine: Yanmar Diesel Track Mounted Excavator Location: Victoria, Australia Learn MoreMachine hours 23.6
KILOMETERS N/A YEAR N/A BRAND Wacker Neuson
LOCATION Victoria, Australia
MODEL ET18
-
Kitchen, Lunch/Work Station Room + Generator & Bathroom Tri-Axle Van (FOR HIRE/RENT - POA) (hire-ehub3582)For HireIncludes; - Kitchen - Lunch Room / Work Station Room - Generator - 2x Toilets Tri-Axle Van Location: Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Australia
MODEL Tri-Axle
-
WP500 Skid Mounted Mud Pump (POA) (sale-ehub3575)For Sale$0.00Model: WP500 Engine: Cummins QSB 4.5 @ 119 kW (160 HP) Fuel Tank Capacity: 200 Litres Estimated Weight: 2,890 kg (excluding trailer) - Base Frame to support engine, pumps, hydraulics and fuel tanks, etc. - Paint, Two Pack Evolution Yellow Hydraulics; - Pump Group Bosch Rexroth - A11VO95/A10VO85/16 - Maximum Circuit Pressure: 250 Bar - Hydraulic Oil Capacity: 400 Litres - Return Filter: 10 Micron - Hydraulic Oil Cooler and Fan Water Pumps; Make: FMC Model: L11-18SC Water Flow Range: 0-530 lpm (140 US/GPM) Maximum Water Pressure: 69 Bar (1,000 PSI) - Adjustable Water Pressure Relief Valve - Water Discharge Pressure Gauge - Surge Chambers on suction & discharge - Discharge Pulsation Dampener - Volvo fixed displacement Piston Drive Motors - Flex Drive Couplings - 2" Inch Water Delivery Hose x 10 metres long Control Panel; - Remote Pilot Hydraulic Control to attach at Rig Control Panel - Selectable Pump 1, 2 or both - Adjustable Friction Lock Control - Selectable Fine Speed Control on Pump 1 - Interconnecting Hoses 10 metres long Skid Mounted Mud Pump Location: Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Home Made
LOCATION Australia
MODEL WP500
Filter