Search results for: 'each to weir atlas kit travel trailer foot pipe'
- Related search terms
- foot lauderdale globe entry enrollment center location
- foot lauderdale globe entry enrollment canter location
- foot revers r poa 2007 for sale
- foot revers r poa 2008 for sale
- pipe sale 350 brand australia
-
Jules Weber Conventional Wheel Mounted Drill Rig ($110,000 ex GST) (sale-ehub3096)For Sale$110,000.00Make / Model: Jules Weber Hours: 3,757 - Bowen Power Swivel / Top Drive - Bourne Draw Works with 18,000 lbs single line pull - 6 Line Travelling Block for a maximum 108,000 lbs hoist - Has drilled down to 900 m a number of times Conventional Wheel Mounted Drill Rig Location: Victoria, Australia Learn MoreMachine hours 3,757
KILOMETERS N/A YEAR N/A BRAND Jules Weber
LOCATION Victoria, Australia
MODEL Jules Weber
-
General Breaker Excavator Hammer GB7TL/GB8ATL 18-22 Tonne Rock Breaker with Toolbox ($24,500 ex GST) (sale-ehub3045)For Sale$24,500.00Make: General Breaker Model: GB7TL/GB8ATL Weight: 18-22 Tonne Titan Headplate: 80 mm pins, 320 mm ears and 470 mm centers - Industry standard breaker with Australian dealer and parts support - Comes with toolbox containing gas charge kit, tools and spares Full in house rebuild with the following new parts; - Tie Rods - Tool Retainers - Upper and Lower Bushes - Full Seal Kit - Charge Valve - Wedge Chisel - All Hardware and Fasteners Flame Resistant Hydraulic Hoses Piston and Bore in Perfect Condition Transport and Storage Stand Supplied Operators Manual in PDF Full 12 month Workshop warranty supplied Excavator Hammer Rock Breaker Location: Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND General Breaker
LOCATION Australia
MODEL GB7TL/GB8ATL
-
Trailer Mounted Drill Rig ($165,000 ex GST) (sale-ehub3036)For Sale$165,000.00Drill Rig Trailer Mounted Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A
-
Drill Rig Mounted on 1998 Volvo FL7 / 260 8x4 C/Cab Truck + Truck with Tanks & Mud Pump and Mud Cleaning Trailer Mounted Unit Package ($440,000 ex GST (w/ Truck) / $395,000 ex GST (w/out Truck) (sale-ehub3029)For Sale$440,000.00Rig Make / Model: Unknown Hours: 272 - Onboard Sullair Air Compressor Rig Truck Make: Volvo Model: FL7 / 260 Year: 1998 GVM: 27,500 kg Type: 8x4 C/Cab Truck - Includes Tanks Mud Pump & Mud Cleaning Trailer Mounted Unit Pricing: $440,000 ex GST with Truck $395,000 ex GST without Truck Package Location: New South Wales, Australia Learn MoreMachine hours 272
KILOMETERS N/A YEAR 1998
BRAND Volvo
LOCATION New South Wales, Australia
MODEL FL7 / 260 (Truck)
-
2017 Atlas Copco XRVS 1050 Wheel Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3025)For HireMake: Atlas Copco Model: XRVS 1050 Year: 2017 Hours: 816 Wheel Mounted Air Compressor Location: New South Wales, Australia Learn MoreMachine hours 816
KILOMETERS N/A YEAR N/A BRAND Atlas Copco
LOCATION New South Wales, Australia
MODEL XRVS 1050
-
2 x Instantel Minimate Blaster Vibration Monitors ($5,750 ex GST each) (sale-ehub2070)For Sale$5,750.00Make: Instantel Model: Minimate Blaster Year: Unknown Quantity: 2 Vibration Monitors Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Instantel
LOCATION Western Australia
MODEL Minimate Blaster
-
Various Seamless Steel Drill Pipe with Tool Joints (POA) (sale-ehub2005)For Sale$0.00Seamless Steel Drill Pipe with Tool Joints API Specification 5DP PSL 1 - 35" Inch Pin Taper Shoulder - Tool Joints will be included with 18 Deg Box - 2" Inch XL Tong Space & Threads shall be phosphatised - Internal Plastic Coating - Fitted with presses steel thread protectors on both ends - Shall be coated on the outside with rust preventing coating to withstand marine transportation. - Will be API Monogrammed Quantity: Various *Brand New* Drill Pipe Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION New South Wales, Australia
MODEL N/A -
Drill Pipe / Rod Trailer *Drill Pipe Not Included* (POA) (sale-ehub2004)For Sale$0.00Drill Pipe / Rod Trailer *Drill Pipe Not Included* Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
30x 9 7/8" Inch D97 QL80 DGR HFDC 16 Spline 250 mm Hammer Bits ($900 ex GST each) (sale-ehub1994)For Sale$900.00Type: 9 7/8" Inch D97 QL80 DGR HFDC 16 Spline 250 mm - Approx. 15x either have no exhaust tubes installed or broken Quantity: 30 Hammer Bits Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Western Australia
MODEL 250 mm
-
32 x Lengths 3 Metre Used NQ Drill Rods / Pipe ($90 ex GST each) (sale-ehub1967)For Sale$90.00NQ Drill Rods Length: 3 Metres Quantity: 32 Used - Once used on 1 hole Location: Victoria, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Victoria, Australia
MODEL 3 Metres
-
40' Foot Hydraulic Jack Up Rod Sloop Base *Motor Not Included* (POA) (sale-ehub1944)For Sale$0.00Jack Up Rod Sloop Base Hydraulic 40' Foot (12 metres approx.) - Motor not included Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
1990 International T-Line T2670 8x4 Support Truck with Atlas Copco XRVS 976CD Air Compressor ($100,000 ex GST) (sale-ehub1942)For Sale$100,000.00Make: International Model: T-Line T2670 Year: 1990 KM's: TBA Type: 8x4 Chassis / Cab Seats: 2 Compressor Make: Atlas Copco Model: XRVS 976CD Year: 2005 Hours: 5,674 Weight: 5,500 kg 317 kW Support Truck Air Compressor Location: Queensland, Australia Learn MoreMachine hours 5,674 (Compressor)
KILOMETERS N/A YEAR 1990
BRAND International
LOCATION Queensland, Australia
MODEL T-Line T2670
-
1988 Sandvik UDR650 Drill Rig Mounted on 1988 International 2250-D Truck ($295,000 ex GST) (sale-ehub1933)For Sale$295,000.00Rig Make: Sandvik Model: UDR650 Year: 1988 Hours: 6,568 - Historical Maintenance / Service Records Available - UDR650 Equipment Manuals - Upgrade - Mast Replaced March 2019 - Equipment upgraded / refitted every year to comply with standards and maintenance - Department of Transport Pit Inspections - Yearly - Compliance Certifications - NDT - Yearly - Lifting Register - Bi-Annual - Fire Extinguishers - Bi-Annual - Brake Tests - Bi-Annual - Spare Mast & Traverse Cylinder Included - No Onboard Air Compressor - Traverse cylinder - Tower / Mast (The mast was replaced approx. 3 years ago) - Steel hydraulic piping up the tower - New back plate for the Head Rack Truck Make: International Model: 2250-D Year: 1988 KM's: 94,122 Truck Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 6,568
KILOMETERS 94,122
YEAR 1988
BRAND Sandvik
LOCATION Queensland, Australia
MODEL UDR650
-
Hard Line Pressure Pipe with 3" Inch FIG 1502 Connections ($10,000 ex GST) (sale-ehub1931)For Sale$10,000.00Hard Line Pressure Pipe Type: 3" Inch FIG 1502 Connections 15,000 PSI Rated Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
Humpy Site Office / Workshop Trailers (POA) (sale-ehub1893)For Sale$0.00Specifications; - 50 mm Tow-Ball Coupling & Dual Safety Chains - 50 mm Solid Square Axles - 9 Leaf Load Share Suspension - 12" Inch Electric Brakes - Electric Breakaway Unit - LED Tail, Indicator and Marker Lights - 15" Inch Sunraiser Wheels with 8 Ply Light Truck Tyres - 2 x Spare Wheels - 4 x Adjustable Stabiliser Legs Dimensions; Transport Width: 2.45 m Transport Height: 3.0 m Transport Length: 5.5 m Capacities; - Tare Weight: 2,500 kg to 2,750 kg - ATM: 3,500 kg Functions & Features; - Pigeonholes and under-bench tool storage - 125 mm Multipurpose Vice - Tooling and Hard Hat Hooks - 1 x Personal Access Door - Microwave - Fridge - Storage Cabinets - 5.5 kW Diesel Generator - 4 x Double Power Point GPO 10 AMP - 3.5 kW Daiken Split System Air Conditioner - Water Tank & Hand Wash Station - 8 x 12V/24V LED External Lights - 2 x 240v LED Internal Lighting - Retractable Awning - Dual Wheel Chocks Options; - Open Layout - Open plan full walkthrough - Split Layout - Separate workshop and office Roof mounted AC Unit (Domestic IBIS 4) Two-piece Rear Door 8.0 kW Diesel Generator Humpty Site Office / Workshop Trailers Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL N/A
-
1993 Edson 8000 Drill Rig Mounted on International 8x4 Truck ($190,000 ex GST) (sale-ehub1892)For Sale$190,000.00Rig Make: Edson Model: 8000 Year: 1993 Hours: 4,600 Engine: Cummins 855 @ 300 HP Deck Engine Mast: 11.5 m Pullback: 16 Tonne Stroke: 7 m Includes; - Dump Mast & Sliding Base - 13 Tonne Winch - 9 m Rod Pull - Head Side Rack - 2 Tonne Wireline Winch - Dual W1122 Bean Pumps - Foot Clamps - Overshot - Burst Protection on Hosing - E-Stops - Has Fire Suppression System Installed (Out of date) Rig Truck Make / Model: International Engine: Cummins 855 @ 400 HP Type: 8x4 - Road Ranger Box Truck Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 1993
BRAND Edson
LOCATION Queensland, Australia
MODEL 8000
-
Hydraulic Cylinder to Suit Atlas Copco Pit Viper PV271 / PV275 Drill Rig ($450 ex GST) (sale-ehub1884)For Sale$450.00Make: Atlas Copco Model: Pit Viper PV271 / PV275 Year: 2020 Hydraulic Cylinder Brand New - Has been pulled apart to check and lube seals Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2020
BRAND Atlas Copco
LOCATION Queensland, Australia
MODEL Pit Viper PV271 / PV275
-
2012 Chengdu Zhonghang Machinery F-500 Triplex Mud Pump Mounted on Trailer (FOR HIRE/RENT - POA) (hire-ehub1877)For HireMake: Chengdu Zhonghang Machinery Model: F-500 Year: 2012 Hours: TBA Pump Speed: 165 r/min Engine: 2011 Cummins QSX15 Trailer Mounted Triplex Mud Pump Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Chengdu Zhonghang Machinery
LOCATION Queensland, Australia
MODEL F-500
-
2019 Elastec 770 770 CFM Pulling Vacuum Spill Trailer ($KES13,800,000) (sale-ehub1773)For Sale$0.00Make: Elastec Model: 770 Hours: Less than 250 KM's: Less than 1,000 Engine: 48 HP Diesel Year: 2019 Includes - Air Cooled Blower - Pulling Vacuum @ 770 CFM - Vacuum Clutch Present - Auxiliary Hydraulic Power - More Manoeuvrable than Vacuum Tanks - High Air Flow conveys material through long hoses - Heavy Duty Chassis - 27 Gallon / 102 Litre Fuel Tank - Hydraulic Brakes on all four wheels - Heavy Duty Suction Wand with Cyclonic Separator - DDT Approved Safety Chains and Hooks - Stabilizer Jacks for rear of trailer - Tongue extends 15 inches Spill Trailer Location: Nakuru, Kenya Learn MoreMachine hours Less than 250
KILOMETERS Less than 1,000
YEAR 2019
BRAND Elastec
LOCATION Nakuru, Kenya
MODEL 770
-
Multiple 6 Metre Length with 3" Inch Remet Thread RC75 / Air Pipe ($350 ex GST each) (sale-ehub1752)For Sale$350.00Model: RC75 / Air Pipe Type: 6 Metre 3" Inch Remet Thread Multiple Length RC75 / Air Pipe Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND N/A
LOCATION Queensland, Australia
MODEL RC75 / Air Pipe
Filter