Search results for: 'track chủ negoti sub man hire tg:e10838 used'

New Build FH1000 Multipurpose Track / Truck Mounted Drill Rig (POA) (sale-ehub3569)

For Sale

$0.00

Model: FH1000 Pull Back: 97 kN (21,783 lbf) Pull Down: 45 kN (10,116 lbf) Water Pump: Standard FMC W1122BCD 140 lpm @ 1,000 psi Depth Capacity; NQ Core: 1,150 m HQ Core: 786 m HWT Core: 518 m RC 4" Inch: 198 m (Nominal) Engine Options; - John Deere Power Tech 6.8L @ 155 kW (208 HP) - Caterpillar CAT C6.6 ACERT - Cummins B5.9-173 Traverse Speed; Up: 47 m/min (154 ft/min) Down: 30 m/min (98 ft/min) Rotation Head; - Top Head Drive - Maximum Torque: 5,965 Nm (4,400 ft/lb) in low gear - 0-1,500 RPM Speed Range - Two Speed Gearbox - 100% Theoretical Main Winch; - Maximum Pull: 88.4 kN (19,870 lbf) - 55 m/min (180 ft/min) - Mast Top Mounted - 1x Multi Disc Brake Unit - Fail Safe Spring Activated - Hydraulic Pressure Release - Main Winch Rope - Safety Factor to Meet BS/EN791 - 6 Metre Rod Pull Capacity Wireline Winch; - Deck Mounted - Maximum Pull: 13.5 kN (3,044 lbf) - Rope Capacity: 1,400 Metres x 6 mm Rope - Maximum Speed: 342 m/min (1,124 ft/min) New Build Multipurpose Track / Truck Mounted Drill Rig Location: Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Home Made
LOCATION	Australia	MODEL	FH1000

Add to Wish List Add to Compare

1750 Scout Auger Drill Rig (POA) (sale-ehub3565)

For Sale

$0.00

Model: 1750 Scout Engine: Perkins Diesel Torque: 2,500 Nm at 205 bar and 110 RPM Stroke: 1.75 m Pull-Out / Pull-Down: 1,100 kg Capacity (Guide Only): NQ - 60 m / 4" Inch Open Hole - 30 m / 3 1/2" Inch Auger - 15 m - Custom Toyota 33220 Tray - Direct Dive Auger Head with High Torque Head Motor and Fittings - Fine Feed Control - Auger Drive Sub (1 1/8" Inch Hex) - RHS Mast - Tilt Frame for Vehicle/Trailer Mounting - Hydraulic Tilt - Heavy Duty Pull-Down Chain - Nylon Idler Rollers - Standard Auger Guide - Standard Control Panel - Hydraulic Operation - Rain Hood for Motor & Lockable Cage for Spare Wheel & Motor - Remove Throttle and Stop - Water Filter for Fuel / Water Separation - Light Guard for Augers 500 mm to 1,800 mm - Oil Cooler - Simple Rack for Augers Options for Drill; - Hollow Spindle Head and Tooling for Fluid Drilling - 2 Levelling Jacks for Tray Mount Drills - Tilting Rack for Augers - Alternative Engine Options to suit existing fleet Toyota Landcruiser Upgrade Kit; - Roof Racks for Spare Tyre (31678) - Roof Rack Mounts Pair (31679) - GVM Upgrade Spring Kit @ 4,200 kg (Supply Only - 31680) - Bellows Suspension Kit (Supply Only - 31730) - Storage Box LH Under Deck (33249) - Storage Box RH Under Deck (33248) - Under Deck Water Tanks @ 29 Litres (33137) *Ready for mounting to a Toyota 79 Series Landcruiser Cab Chassis* Drill Rig Location: Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Australia	MODEL	1750

Add to Wish List Add to Compare

TL-400 Portable Light Tower ($2,850 ex GST) (sale-ehub3514)

For Sale

$2,850.00

Make / Model: TL-400 Contains: - Tower - Flashlight - Headlight - Charger - Driver - Battery System D24-100 - USD Output, 5V 2A (2 Dock) for charging Headlight, Flashlight or Mobile Phone - 1-3 Battery Pack (1 Battery 30+ Hours extreme mode) - Height: 64.5 cm - 220 cm - Weight: 12.85 kg - One Man Operation - Self locking and 30 degree + up/down adjustable pole - Run Times > 10 hours (High output, 3 batteries) Application - Drilling - Construction - Maintenance - Events - Mining - Emergency - Infrastructure - Personal Control Board - Power Switch - Brightness - DIM+, DIM- - Battery Level - AC Plug - USB Output Light Brightness Area: 1,100 m2 5 m - 490 lux / 10 m - 120 lux / 20 m - 29 lux / 40 m - 7 lux Battery / AC 100-227V - AC 0-15,000 LM - High 8,000 LM - Medium 5,000 LM - Low 2,500 LM - Extreme 800 LM - Rate Power 28 wh - Rate Voltage 24.5 V - Rate Capacity 40 Ah - Working Temp: -10 to 50 degrees - Working Humidity: -20 to 95% Portable Light Tower Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	TL-400

Add to Wish List Add to Compare

2008 Komatsu D65PX-15 Track Mounted Crawler Dozer ($240,000 ex GST) (sale-ehub3509)

For Sale

$240,000.00

Make: Komatsu Model: D65PX-15 Year: 2008 Hours: 5,800 (Engine Overhaul) - Painted with Two Pack Track Mounted Crawler Dozer Location: Queensland, Australia Learn More

Machine hours	5,800	KILOMETERS	N/A
YEAR	2008	BRAND	Komatsu
LOCATION	Queensland, Australia	MODEL	D65PX-15

Add to Wish List Add to Compare

Gardner Denver 8x5 Hydraulic Driven Trailer Mounted Mud Pump (FOR HIRE/RENT - POA) (hire-ehub3493)

For Hire

Make: Gardner Denver Model: 8x5 - Hydraulic Driven Trailer Mounted Mud Pump Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Gardner Denver
LOCATION	New South Wales, Australia	MODEL	8x5

Add to Wish List Add to Compare

2012 MAN 4x4 Support Truck ($120,000 ex GST) (sale-ehub3488)

For Sale

$120,000.00

Make: MAN Year: 2012 KM's: 250,000 (30,000 on new engine) Type: 4x4 - New engine installed in 2022 - Bulk Fuel Underbelly Tanks *Drill Rig in photos not available with Support Truck* Dual Cab Support Truck Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	250,000
YEAR	2012	BRAND	MAN
LOCATION	Western Australia	MODEL	4x4

Add to Wish List Add to Compare

2008 Hydco 1000H Track Mounted Drill Rig (POA) (sale-ehub3465)

For Sale

$0.00

Make: Hydco Model: 1000H Year: 2008 Hours: 4,304 Engine: Cummins 6CTA Onboard Air Compressor: Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Compressor Hours: 819 Compressor Engine: Caterpillar CAT C15 - Setup for mainly RC however has the diamond capabilities & equipment - Rig has recently been completing RC holes to depths of 425 m coupled with the Aux Compressor Kit giving 2,400 CFM / 1,000 PSI Diamond Drilling Capacity; HQ: 1,000 m NQ: 1,500 m PQ: 600 m Features; - Harlsan Auto Blow Up and Blowdown - KL Rod Handler - Hydraulic Breakouts - Hydraulic Spanners - Safety Cage with Interlock - Quick Access Mountable Stuffing Box Assembly - Fire Suppression - Dust Suppression - FMC Bean Pump for Diamond Drilling - FMC Dual Pump for Water Injection - Hydraulic Foot Clamps - Diamond Drilling Safety Cage - Diamond Drilling Platform - Storage Area with Safety Rails and Access Ladders - Refurbished Cyclone - New Cone Splitter - New Track Chains and Rollers - 400x Metres of 4.5" Inch Remet Rods - Airdrill 670 Hammers & Bits - Other specific RC Gear Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	4,304	KILOMETERS	N/A
YEAR	2008	BRAND	Hydco
LOCATION	Western Australia	MODEL	1000H

Add to Wish List Add to Compare

Keypower 6V92TA1400 Skid Mounted Booster *Not Actual Photo of Unit* (FOR HIRE/RENT - POA) (hire-ehub3426)

For Hire

Make: Keypower Model: 6V92TA1400 Max Inlet Pressure: 2,413 kPa / 350 PSI Max. Delivery: 660 l/sec / 1,400 CFM Max. Discharge Pressure: 5,171 / 850 PSI Compression Ratio: 2:1 (Nominal) / 3:1 (Maximum) Bore: 57 mm Stroke: 127 mm Max. Operating Angle: 15 degrees Engine: Detroit 6V92TA Diesel *Not Actual Photo of Unit* Skid Mounted Booster Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Key Power
LOCATION	New South Wales, Australia	MODEL	6V92TA1400

Add to Wish List Add to Compare

2004 Cubex QXR 920 Track Mounted Surface Drill Rig ($185,000 ex GST) (sale-ehub3439)

For Sale

$185,000.00

Make: Cubex Model: QXR 920 Year: 2004 (Rebuild 2019) Hours: 16,896 Engine: Caterpillar CAT C15 Rotary Head: Cubex @ 6,230 hours (Rebuilt May 2019) Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM Variable Jaw Rotation: 15 degrees Clamping Force: 288 kN Carousel Capacity: 6 Rods Max. Rod Size: 5" Inch Min. Rod Size: 3.25 " Inch Rod Length: 6 m / 20 ft Onboard Air Compressor: Sullair + Spares Included Track Mounted Surface Drill Rig Location: Western Australia Learn More

Machine hours	16,896	KILOMETERS	N/A
YEAR	2004	BRAND	Cubex
LOCATION	Western Australia	MODEL	QXR 920

Add to Wish List Add to Compare

2009 Globe Drill KAL 500-CP8 Track Mounted Drill Rig ($650,000 ex GST) (sale-ehub3434)

For Sale

$650,000.00

Make: Globe Drill Model: KAL 500-CP8 Year: 2009 Hours: 27,332 (Lifetime) / Current Hours: 3,406 Engine: Detroit Series 2000 @ 905 HP Engine Hours: 11,982 Onboard Air Capacity: 1,350 CFM / 500 PSI Hole Inclination: 90-50 degrees Rod String: No Rods - Set up for 4 1/2" Inch Rods Depth Capacity On Board: 330 m Overall Width: 3.9 m Compressor Make: Sullair 1,350 CFM 500 PSI Hours: 2,308 Features; - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression - Remote Tramming Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	27,332	KILOMETERS	N/A
YEAR	2009	BRAND	Globe Drill
LOCATION	Western Australia	MODEL	KAL 500-CP8

Add to Wish List Add to Compare

Various Size, Shank, Head & Insert Halco & Karbo Drill Bits (POA) (sale-ehub3430)

For Sale

$0.00

74x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Canada	MODEL	Halco Mach 44/303 & Karbo

Add to Wish List Add to Compare

Custom 600 RRD Track Mounted Drill Rig (POA) (sale-ehub3428)

For Sale

$0.00

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Home Made
LOCATION	Canada	MODEL	600 RRD

Add to Wish List Add to Compare

2003 SD 100 Track Mounted Drill Rig ($250,000 ex GST) (sale-ehub3425)

For Sale

$250,000.00

Make: SD Model: 100 Year: 2003 Hours: 22,738 (Overall approx.) Engine Hours: 10,793 (New Hour Metre with Current Hours since engine change - 1,977) Onboard Air Capacity: 1,150 CFM / 500 PSI Air Compressor Hours: 12,768 Rotary Head Hours: 2,054 (Since Change Out) Hole Inclination Range: 90-50 degrees Rod String: 4 Met / 6 m Depth Capacity: 60 m Overall Width: 2.95 m - Spare Engine requires rebuild and spares to go with the drill Features - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	22,738	KILOMETERS	N/A
YEAR	2003	BRAND	Home Made
LOCATION	Western Australia	MODEL	SD 100

Add to Wish List Add to Compare

2012 Sandvik DR580 Track Mounted Drill Rig ($285,000 ex GST) (sale-ehub3424)

For Sale

$285,000.00

Make: Sandvik Model: DR580 Year: 2012 Hours: 14,931 Midlife Hours: 12,208 (Engine Repairs) - Starter Motor @ 12,637 hours - Rotary Head Changeout @ 11,319 hours - Air Compressor 1350 CFM / 500 PSI Change Out @ 11,013 hours Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2012	BRAND	Sandvik
LOCATION	Western Australia	MODEL	DR580

Add to Wish List Add to Compare

2022 Atlas Copco X-Air 1,100 CFM / 380 PSI Portable Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3425)

For Hire

Make: Atlas Copco Model: X-Air Year: 2022 Hours: 200 1,100 CFM 380 PSI Portable Air Compressor Location: New South Wales, Australia Learn More

Machine hours	200	KILOMETERS	N/A
YEAR	N/A	BRAND	Atlas Copco
LOCATION	New South Wales, Australia	MODEL	X-Air

Add to Wish List Add to Compare

2019 Atlas Copco DrillAir XRYS 1260 CD7 1,260 CFM / 550 PSI Skid Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3424)

For Hire

Make: Atlas Copco Model: DrillAir XRYS 1260 CD7 Year: 2019 Hours: 2,000 1,260 CFM 550 PSI Skid Mounted Air Compressor Location: New South Wales, Australia Learn More

Machine hours	2,000	KILOMETERS	N/A
YEAR	N/A	BRAND	Atlas Copco
LOCATION	New South Wales, Australia	MODEL	DrillAir XRYS 1260 CD7

Add to Wish List Add to Compare

20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3420)

For Hire

Tray Length: 12 m (Not Including Power Pack) Width: 3.2 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	New South Wales, Australia	MODEL	N/A

Add to Wish List Add to Compare

20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3419)

For Hire

Tray Length: 10 m (Not Including Power Pack) Width: 2.5 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	New South Wales, Australia	MODEL	N/A

Add to Wish List Add to Compare

Submersible Bore Pump with Star-Rite L90 HF550 Pump & Motor ($6,500 ex GST) (sale-ehub3412)

For Sale

$6,500.00

- Set Up for Testing - Reel with 110 Metres of New 50 mm Poly Pipe - New Stainless Steel 4 mm Cable - V Box Weir - Control Box - New Star-Rite L90 HF550 Pump and Motor Condition: New - Never Used Submersible Bore Pump Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	New South Wales, Australia	MODEL	Submersible

Add to Wish List Add to Compare

2020 Worldpoly Poly Force 500 Track Mounted Welding Machine ($187,000 ex GST) (sale-ehub3366)

For Sale

$187,000.00

Make: Worldpoly Model: Poly Force 500 Year: 2020 Hours: 148 #WP500 Voltage V/P/Hz: 415/3/50 Electric Power: 9 kW Net Weight: 3,300 kg Track Mounted Welding Machine Location: Queensland, Australia Learn More

Machine hours	148	KILOMETERS	N/A
YEAR	2020	BRAND	Worldpoly
LOCATION	Queensland, Australia	MODEL	Poly Force 500

Add to Wish List Add to Compare

Search results for: 'track chủ negoti sub man hire tg:e10838 used'

AUSTRALIA WIDE SERVICE

REQUIRE ASSISTANCE - HAVE A QUESTION?

EQUIPMENT FOR HIRE OR FOR SALE