Search results for: 'dozer shale prime head hire clamp ct14 cfm'

Make: Keypower Model: 6v92TA1400 Type: Reciprocating Piston Engine: Detroit 6v92TA @ 1800 RPM Max Inlet Pressure: 2413 kPa / 350 PSI Max Delivery: 1400 CFM / 660 L/Sec Max Discharge Pressure: 750 PSI Compression Ratio - Nominal: 2:1 - Max: 3:1 No of Stages: 1 No of Cylinders: 3 Bore: 57 mm (2-3/8") Stroke: 127 mm (5") Cooling System - Pre-Cooler: Air to Air - After-Cooler: Air to Air Max Operating Angle: 15" *For more information, please contact us* *NOTE: Doesn't have a stand alone fuel tank* Location: Queensland, Australia Learn More

Make: Sullair Model: 900XHH / 1150XH Hours: Approx 2,500 / Approx Less than 500 CFM: 900 / 1150 PSI: 500 / 350 Engine: Caterpillar C-15 ATAAC Engine Displacement: 928 in3 / 15.2 cc Cylinders: 6 Cycles: 4 Bore & Stroke: 5.40 x 6.7 in / 137 x 171 mm RPM: 1800 Power: 540 hp / 403 kW Tri-Axle Mount (DTQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 92 inch / 2,337 mm Less Running Gear (DLQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 83 inch / 2,108 mm 4 - Wheel Mount (DWQ) L: 240 inch / 6,096 mm (Drawbar) L: 179 inch / 4,547 mm (Canopy) W: 88 inch / 2,235 mm H: 99 inch / 2,515 mm Track Width Tri-Axle Mount (DTQ) 77 inch / 1,956 mm 4 - Wheel Mount (DWQ) 78 inch / 1,981 mm Weight: 16,040 lb / 7,276 kg *For more information, please contact us* Location: Queensland, Australia Learn More

Make/Model: DW400C Year: New (2022) Machine Hours: 0 Engine: Cummins 6LTAA8.9 @ 360 HP Includes: - Sauer Danfoss Load Sensed Piston Pumps - Sauer Danfoss PVG Valves - 4 Speed Rotation Head 0-600 RPM / 16,000 Nm Torque - Sliding Head - Tilting Head - Floating Spindle with 2.5" Waterway - 25 Tonne Pullback - Dump Mast (Long Stroke) - 20" Inch Diameter Through the Work Table - Breakout Ram - 8 7.5" Inch Mud Pump (Made in India) - 10 Tonne Single Pull Winch Mounted on Top of Mast - Manuli Hoses on All High Pressure Lines - 4 x Enclosed Outriggers - Can extend for ease of loading onto a lowbed trailer *Can easily be converted to RC due to the large thru-hole in the rotation head* *Can be delivered on rails for mounting onto any truck* Location: Philippines Learn More

Make: Cascade Model: 132HWF1840016 Year: 2010 Mass: 861 kg Hor. C of G: 301 mm Vert. C of G: 158 mm ET (LL): 255 mm Capacity at Load Centre: 4000 kg @ 600 mm S/N: 198786 - Euro Quick Hitch - Hydraulic Clamping Forks - 4 T rated Condition: Good and Working Location: Queensland, Australia Learn More

Make: Thyssenkrupp Model: H850A Year: 2007 Re-beared & Inspected Gearbox Is As New Needs New Seals In Bottom End S/N: 8560 0546 Condition: Excellent Location: Tasmania, Australia Learn More

Make: Sullair Model: 900XHH / 1150XH Engine: Caterpillar CAT Skid Mounted Air Compressor Location: Queensland, Australia Learn More

Make: Sandvik Model: UDR650 Year: 2008 No Motor No Head Serial Number: UDR650-132-08 Location: Western Australia Learn More

Make: Caterpillar Model: D7R Ripper Year: 2013 Hours: 4062 Crawler Dozer Track Mounted Erops Cab Su-Blade Serial: DSH00135 Location: West Africa Learn More

Total tank capacity: 79.5kL (500BBL) Road trainable Full-size submarine access door into tank Ladder accessible viewing platform to observe inflows and fluid heights Sight glass fluid level indicator Sunken suction sump with strainer grate Rugged 200 x 100 RHS perimeter frame 6mm crimped walls, 10mm floors Tandem axle, leaf spring suspension Internal surfaces coated with corrosion resistant paint *For any additional information, please contact us* Learn More

Foot Clamp Assembly Complete (Ex Jaws – sold separately) Brand New Location: New South Wales, Australia Learn More

Foot Clamp Jaw Teeth Inserts Brand New Location: New South Wales, Australia Learn More

Foot Clamp HQ, BQ, NQ, PQ Jaw Sets Brand New Location: New South Wales Learn More

Make: Atlas Copco Model: T5 Year: Unknown Tower & Rotation Head Location: Queensland, Australia Learn More

FOR HIRE/RENT - Tracked Compressor/Booster Package - Keypower 6V92 1400cfm 700PSI Booster - Atlas Copco XRVS1000cfm 350PSI - Remote controlled, self-propelled track base - Condition: Excellent Learn More

Cementing Heads The PVC Cementing heads suit 100mm, 150mm, 177mm & 200mm casing and they are as new. Learn More

Make: Cortech Model: CSD1300L CSD1300L core drilling rig is specially designed for diamond core drilling. Track crawler mounted rig facilitates moving around with great convenience. Robust structure plus strong power supply ensures high penetration rate and outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 1,300m 1,000m 700m 400m Hydraulic System Pressure 26MPa Cooling Air Cooled Power System Model Cummins 6BTA5.9 –C180 Type Turbo Charged Power 132KW Engine RPM 2,500rpm Drill Head Max Torque 4,257Nm Max Rotation ,RPM 1,182rpm Feed Stroke 3.5m Max Inside Diameter 117mm Max Pull / Max Push 127KN/ 50KN Main Winch Max Pull 68KN Pulling Speed 28m/min Rope Diameter 16mm Rope Length 30m Wireline Winch Max Pull 11KN(bare drum) Pulling Speed 120m/min Rope Diameter 6.6mm Rope Length 1,000m Mast Length 10m Drilling Angle 45°-90° Dump Length 1.1m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 5,100×2,350×2,600mm Total Weight: 8.5t Diamond Coring Drill Rig Location: China Learn More

Make: Cortech Model: CSD3000 CSD3000 core drilling rig is specially designed for diamond core drilling. It provides precise control on the drilling capacity. The drill head is designed to slide and dump, together with the full angle rotation structure for drill mast, it effectively reduces manual inputs and improves efficiency. The hydraulic legs are stretchable, which broaden the bearing surface, and ensure outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • 9 meters rod pulling largely improves drilling efficiency due to rod collection frame design on mast • The design of side shift by hydraulic of rotation head largely reduces working tensions and guarantees personnel safety • Multi-pressure gauge reads real time pressures for kinds of major components • High/low speed control of main winch largely meets speed requirements for rods handling • Stepless control of mud pump flow facilitates various drilling needs for mud • telescopic mast greatly reduces working tensions and improves drilling efficiency. • Horizontal extension of jack legs guarantees firm rig standing on the ground. • Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • Independent tramming cab set in front provides full view for easy rig walking and driver’s safety • Mast dumping guarantees perfect stability during drilling; • Independent hydraulic jacks facilities leveling of the rig; • Great convenience of control of feed pressure; • Standardized parts and components make maintenance and repairing easy; • Real time reading of drilling data on gauges on the control panel; • Mud pump and mixer powered by the rig’s hydraulic system, controlled directly on the rig’s panel; • Top grade hydraulics of European origin; • Experienced engineers plus adequate spare parts ready to provide full service. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 3,000m 2,300m 1,600m 1,050m Hydraulic System Pressure 28MPa Cooling Air Cooled Power System Model Cummins 6LTAA8.9-C325 Type Turbo Charged Power 239KW Engine RPM 2,200rpm Drill Head Max Torque 8,170Nm Max Rotation ,RPM 1,250rpm Feed Stroke 3,450mm Max Inside Diameter 117mm Max Pull /Max Push 250KN/110KN Main Winch Max Pull 181.44KN Pulling Speed Low:33m/min High:70m/min Rope Diameter 24mm Rope Length 41m Wireline Winch Max Pull 18KN(bare drum) Pulling Speed 150m/min(bare drum) Rope Diameter 6.6mm Rope Length 2,500m Mast Length 11.2-13.7m Drilling Angle 45°-90° Dump Length 1.4m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 11,240×2,310×3,330mm Total Weight 23.5t Diamond Coring Drill Rig Location: China Learn More

Atlas Copco XAS1600 CD6 Air Compressor Model: XAS1600 SN: APP293850 KW: 318 RPM: 1650 Learn More

Extreme HP Frac Pump Skid The Jack Up Skid when raised measures 1660 mm from ground to bottom of skid enough height for a trailer of 1500mm height to drive underneath. The Jack Up Skid dimensions are: 2505mm wide x 9135mm overall length and will reach a height of 2615 mm high when the jack legs are retracted and skid is sitting on the ground .Total height dimension of the skid is 4280 mm when the jacking legs are raised. Total Mass of unit complete with equipment 20 000 Kg. CAT C32 rated at 1350hp Allison 8000 series auto trans DP8962R Weir SPM pump Model Tw52250 Build date July 2008 Hours – Approx. 1000 Learn More

Triplex FMC- L1622HV Bean Mud Pump Package For Hire This pump is designed to pump fluids using the Triplex Pump to pump down a well head using pressures of up to 1500 psi. The pump skid weighs only 2450kg (wet) and only covers an area of 2.4m x 1.92m making it very easy to move into restricted areas due to its compact abilities. Because of its limited size it makes it very easy to transport to various locations. The pump skid is compact yet practical to access any part of the pumps. PRESSURE: Maximum 1500 psi - Minimum 100psi Fluids used: Various grades of Muds, water. Learn More