Search results for: 'dozer size prime head hire cab ct14 cfm'

FMC L1122 Horizontal Triplex Piston Pumps (POA) (sale-ehub3435)

For Sale

$0.00

Make: FMC Model: L1122 Stroke Length: 2.75" Inch Piston Diameter: 2.75" Inch Frame Load Rating: 6,000 lbs Internal Gear Ratio: 3.6:1 Intermittent Duty Speed Rating: 1,275 RPM Continuous Duty Speed Rating: 900 RPM Standard Suction Size: 2.50" Inch NPT Standard Discharge Size: 1.25" Inch NPT Number of Pistons: 3 Horizontal Triplex Piston Pump Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	FMC
LOCATION	New South Wales, Australia	MODEL	L1122

Add to Wish List Add to Compare

2009 Globe Drill KAL 500-CP8 Track Mounted Drill Rig ($650,000 ex GST) (sale-ehub3434)

For Sale

$650,000.00

Make: Globe Drill Model: KAL 500-CP8 Year: 2009 Hours: 27,332 (Lifetime) / Current Hours: 3,406 Engine: Detroit Series 2000 @ 905 HP Engine Hours: 11,982 Onboard Air Capacity: 1,350 CFM / 500 PSI Hole Inclination: 90-50 degrees Rod String: No Rods - Set up for 4 1/2" Inch Rods Depth Capacity On Board: 330 m Overall Width: 3.9 m Compressor Make: Sullair 1,350 CFM 500 PSI Hours: 2,308 Features; - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression - Remote Tramming Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	27,332	KILOMETERS	N/A
YEAR	2009	BRAND	Globe Drill
LOCATION	Western Australia	MODEL	KAL 500-CP8

Add to Wish List Add to Compare

Various Size, Shank, Head & Insert Halco & Karbo Drill Bits (POA) (sale-ehub3430)

For Sale

$0.00

74x Halco Mach 44 4 1/2" Inch Convex Domed Condition: New / Used (Rust) 33x Halco Mach 44 4 1/4" Inch Convex Domed Condition: New / Used (Rust) 1x Halco Mach 44 4 1/2" Inch Concave Domed Condition: New 3x Halco Mach 44 4 1/8" Inch Convex Domed Condition: New 34x Halco Mach 303 3 1/2" Inch Convex Ballistic Condition: New 3x Karbo 4 1/2" Inch Convex Condition: New 4x Karbo 4 1/2" Inch Convex Condition: 3x New / 1x Used Various Size, Shank, Head & Insert Drill Bits Location: Canada Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Canada	MODEL	Halco Mach 44/303 & Karbo

Add to Wish List Add to Compare

Custom 600 RRD Track Mounted Drill Rig (POA) (sale-ehub3428)

For Sale

$0.00

Make: Custom Model: 600 RRD Motor: 40 HP TEFC Pulling Capacity: 24,000 lbs Lifting Capacity: 24,000 lbs Down Thrust Capacity: 12,500 lbs Rotational Torque: 6,500 ft/lbs Load Sensing Power Limiting Pump: 45 GPM @ 1,700 PSI Load Sensing Diesel Pump: 15 GPM @ 3,500 PSI Fast Feed: 14.79 GPM @ 2,500 PSI Slow Feed: 6.2 GPM @ 2,500 PSI Traction Hydraulic Motor: 14 HP each at 4,000 MASL (Using Diesel Drive) Max. Drilling Air Pressure: 400 PSI Feed Cylinders Combined Bore: 9.8 sq inch Features; - Lubricator - Water Pump - Robust Mine Proven Construction - High Torque Rotation Head - Reversable Heavy Duty Mast - Efficient Electric/Hydraulic Drive - Fully Hydraulic Operation - Compact Size - Fully Variable Rotation Speed (0-24 RPM) Hydraulically Operated Crawlers - Remotely Operated Hydraulic Console for flexibility - Sting Cylinder - Dual Heavy Duty Feed System - 90 Degree Tilt Out Rotation Head - Longitudinal Shift - Side Shift - NEMA 4 - Air Motors for travelling Track Mounted Drill Rig Location: Canada Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Home Made
LOCATION	Canada	MODEL	600 RRD

Add to Wish List Add to Compare

2003 SD 100 Track Mounted Drill Rig ($250,000 ex GST) (sale-ehub3425)

For Sale

$250,000.00

Make: SD Model: 100 Year: 2003 Hours: 22,738 (Overall approx.) Engine Hours: 10,793 (New Hour Metre with Current Hours since engine change - 1,977) Onboard Air Capacity: 1,150 CFM / 500 PSI Air Compressor Hours: 12,768 Rotary Head Hours: 2,054 (Since Change Out) Hole Inclination Range: 90-50 degrees Rod String: 4 Met / 6 m Depth Capacity: 60 m Overall Width: 2.95 m - Spare Engine requires rebuild and spares to go with the drill Features - Polyurethane Cyclone - Cone Sample Splitter - Dual Breakout System - Dust Suppression - Carousel - Rod Cage - Overhead Protection - Fire Suppression Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	22,738	KILOMETERS	N/A
YEAR	2003	BRAND	Home Made
LOCATION	Western Australia	MODEL	SD 100

Add to Wish List Add to Compare

2012 Sandvik DR580 Track Mounted Drill Rig ($285,000 ex GST) (sale-ehub3424)

For Sale

$285,000.00

Make: Sandvik Model: DR580 Year: 2012 Hours: 14,931 Midlife Hours: 12,208 (Engine Repairs) - Starter Motor @ 12,637 hours - Rotary Head Changeout @ 11,319 hours - Air Compressor 1350 CFM / 500 PSI Change Out @ 11,013 hours Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2012	BRAND	Sandvik
LOCATION	Western Australia	MODEL	DR580

Add to Wish List Add to Compare

2022 Atlas Copco X-Air 1,100 CFM / 380 PSI Portable Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3425)

For Hire

Make: Atlas Copco Model: X-Air Year: 2022 Hours: 200 1,100 CFM 380 PSI Portable Air Compressor Location: New South Wales, Australia Learn More

Machine hours	200	KILOMETERS	N/A
YEAR	N/A	BRAND	Atlas Copco
LOCATION	New South Wales, Australia	MODEL	X-Air

Add to Wish List Add to Compare

2019 Atlas Copco DrillAir XRYS 1260 CD7 1,260 CFM / 550 PSI Skid Mounted Air Compressor (FOR HIRE/RENT - POA) (hire-ehub3424)

For Hire

Make: Atlas Copco Model: DrillAir XRYS 1260 CD7 Year: 2019 Hours: 2,000 1,260 CFM 550 PSI Skid Mounted Air Compressor Location: New South Wales, Australia Learn More

Machine hours	2,000	KILOMETERS	N/A
YEAR	N/A	BRAND	Atlas Copco
LOCATION	New South Wales, Australia	MODEL	DrillAir XRYS 1260 CD7

Add to Wish List Add to Compare

20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3420)

For Hire

Tray Length: 12 m (Not Including Power Pack) Width: 3.2 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	New South Wales, Australia	MODEL	N/A

Add to Wish List Add to Compare

20 Tonne Payload Remote Control Track Mounted Carrier (FOR HIRE/RENT - POA) (hire-ehub3419)

For Hire

Tray Length: 10 m (Not Including Power Pack) Width: 2.5 m Payload: 20 Tonne - Remote Control Track Mounted Carrier Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	New South Wales, Australia	MODEL	N/A

Add to Wish List Add to Compare

Axle & Engineering KWL900 Rotation Head & KWL1600 Mast Package ($110,000 ex GST) (sale-ehub3362)

For Sale

$110,000.00

Rotation Head Make: Axle & Engineering Model: KWL900 Hours: Approx. 5,000 - No longer needed due to conversion to water well Mast Make: KWL Model: 1600 - Dump Plate Included Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Axle & Engineering
LOCATION	Western Australia	MODEL	KWL900 / KWL1600

Add to Wish List Add to Compare

Axle & Engineering KWL900 Rotation Head ($55,000 ex GST) (sale-ehub3358)

For Sale

$55,000.00

Make: Axle & Engineering Model: KWL900 Hours: Approx. 5,000 - No longer needed due to conversion to water well Rotation Head Location: Western Australia Learn More

Machine hours	Approx. 5,000	KILOMETERS	N/A
YEAR	N/A	BRAND	Axle & Engineering
LOCATION	Western Australia	MODEL	KWL900

Add to Wish List Add to Compare

6x Sandvik DR560/80 Track Mounted Contour DTH Drill Rigs (FOR HIRE/RENT - POA) (hire-ehub3356)

For Hire

Make: Sandvik Model: DR560/80 Hours: Various Max Feed Rate: 1.3 m/s (257 ft/min) Max Hoisting @ 2,100 RPM: 47 kN (10,600 lbf) Max Pulldown @ 2,100 RPM: 47 kN Top Drive Rotation Torque: 5,730 Nm Rotation Speed: 0-80 RPM (Variable) Carousel Standard Capacity: 6 Rods (5 Rods for OD 140 mm (5.5" inch) Max Rod Size: 140 mm / 5.5" inch Min Rod Size: 89 mm / 3.5" inch Rod Length: 6.1 m / 20 ft Min Hammer Size: 102 mm / 4" inch Carousel Hole Depth: 42.6 m / 140 ft Max Hole Size: 216 mm / 8.5" inch Min Hole Size: 115 mm / 4.5" inch + More information can be provided Track Mounted Contour DTH Drill Rig Location: Western Australia Learn More

Machine hours	Various	KILOMETERS	N/A
YEAR	N/A	BRAND	Sandvik
LOCATION	Western Australia	MODEL	DR560/80

Add to Wish List Add to Compare

2005 UDR1000 / Sandvik DE840 Multipurpose Drill Rig Mounted on MAN 8x4 Truck ($275,000 ex GST) (sale-ehub3353)

For Sale

$275,000.00

Make: UDR / Sandvik Model: 1000 / DE840 Year: 2005 Engine: Cummins 6CTA8.3 - Hydraulic Rod Clamp - Top Drive Rotary Head - Hollow Floating Spindle - Onboard FMC W1122 Bean Pump - Onboard Sullair 1150 CFM / 350 PSI Air Compressor - Still operational but due for a rebuild Includes; - Mast Dump - Rod Spinner - Sandvik DA554 Rod Handler - RC Sampling System - Fire Suppression Truck Make: MAN Type: 8x4 Truck Mounted Multipurpose Drill Rig Location: New South Wales, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2005	BRAND	UDR
LOCATION	New South Wales, Australia	MODEL	1000 / Sandvik DE840

Add to Wish List Add to Compare

2015 Rebuilt Dino 250 Track Mounted Drill Rig + Drill Trailer Workshop (POA) (sale-ehub3352)

For Sale

$0.00

Model: Dino 250 Year: 2015 (Rebuilt) Hours: 7,119 Engine: Caterpillar CAT 3412 (Rebuilt) Includes; - Complete set of Drill Rods (200 Metres) - Drill Schematics and Parts List - Complete Service and Works History - All Serial # for Onboard Assets - Onboard Dry Element Dust Suppression Unit - Auto Fire Suppression - Hand Free AUSTEX Break Outs - Onboard Rod Handler - Onboard Rod Storage (150 Metres) - Haul Winch - Wireline Winch (350 Metres) - Remote Wireless Tramming Controls - New Metzke Rotating Splitter - Funk Box Drive - Danfoss and Rexroth Hydraulic Pumps Air Compressor Make: Sullair 900 CFM / 350 PSI - Refurbished Booster Make: Detroit Model: 6V92 Hours: 0 - Rebuilt Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	7,119	KILOMETERS	N/A
YEAR	2015	BRAND	N/A
LOCATION	Western Australia	MODEL	Dino 250

Add to Wish List Add to Compare

NW500 126HP Heli / Man Portable Drill Rig + Package (POA) (sale-ehub3327)

For Sale

$0.00

Drill Rig Make: NW Model: 500 - Heli / Man Portable 126 HP Included; - Hydraulic Control Panel - Hydraulic Reservoir c/w Oil to Water Heat Exchanger - 3x Kubota Turbo Charged Diesel Engines @ 42 HP - Light Weight 39 GPM Down Hole Pump - 220 Litre Fuel Tank and AL Stand Feed Frame Complete - Wireline Winch with 750 m 3/16" Inch Wireline Installed - Top Drive Drill Head with Adapter Sub for HWL Drill Rod - Two Rotation Motors for NWL & HWL Drill Rod - 4.5" Inch Rod Clamp c/w Jaws and Steadier Bearing for H & N Rods - Hydraulic Mud Mixer with Safety Shielding - Light Weight AL Mast Rotation Guard - Spline Wrench for Locking Head to change out Drilling Subs Heli Portable Drill Rig Package Location: Canada Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	NW
LOCATION	Canada	MODEL	500

Add to Wish List Add to Compare

Various Hose Restraints, Cable Stockings, Safety Shackles & Cambuckles / Hose Straps (POA) (sale-ehub3284)

For Sale

$0.00

*Each Sold Separately - Not as a Package* Two-Eye Hose Restraint - Wire: Galvanised - Ferrules: Aluminium - Thimbles: Stainless Steel - Leg Protection: Sprial Guards (Colour Coded) Galvanised Sizes - 6-14 mm to 260-300 mm Stainless Steel 316 Sizes - 6-14 mm to 260-300 mm Four-Eye Hose Restraint Galvanised Sizes: 0-1.0 m to >19.5-20.0 m Stainless Steel 316 Sizes: 0-1.0 m to >19.5-20.0 m Single Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Offset Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Twin Eye Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Open Ended Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Lace-Up Cable Stocking Galvanised Sizes: 6-14 mm to 180+ mm Stainless Steel Sizes: 6-14 mm to 180+ mm Safety Shackles Sizes: 0.75 t - 3.2 t Cambuckles / Hose Straps 25 mm Black Polyester Webbing (Plain) Sizes: 400 - 1,500 mm 25 mm FRAS Woven Webbing Sizes: 400 - 1,500 mm 25 mm FRAS Polyester Webbing (Jacquard) Sizes: 400 - 1,500 mm Various Sized Hose Restraints Cable Stocking Safety Shackles Cambuckles Hose Straps Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Western Australia	MODEL	See Description for Sizes

Add to Wish List Add to Compare

Atlas Copco Air End (Open to Offers) (sale-ehub3220)

For Sale

$0.00

Make / Model: Atlas Copco Size: Unknown Condition: Unknown Air End Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Atlas Copco
LOCATION	Western Australia	MODEL	Atlas Copco

Add to Wish List Add to Compare

Sykes VP150i 1,500 RPM Skid Mounted Pump (FOR HIRE/RENT - POA) (hire-ehub3197)

For Hire

Make: Sykes Model: VP150i Pump Speed: 1,500 RPM Max Pressure: 230 kPa Best Pressure: 167 kPa Min Pressure: 133 kPa 150 x 150 x 285 Skid Mounted Pump Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Sykes
LOCATION	Queensland, Australia	MODEL	VP150i

Add to Wish List Add to Compare

1980 Mobile Drill B80 Dump Mast (Open to Offers) (sale-ehub3137)

For Sale

$0.00

Make: Mobile Drill Model: B80 Year: 1980 Head Stroke: Approx. 4.5 m long Dump Stroke: Approx. 2 m long Mast Length: 10 m Mast was on a working rig that has been dismantled for new mast and rig Mast Location: Victoria, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	1980	BRAND	Mobile Drill
LOCATION	Victoria, Australia	MODEL	B80

Add to Wish List Add to Compare

Search results for: 'dozer size prime head hire cab ct14 cfm'

AUSTRALIA WIDE SERVICE

REQUIRE ASSISTANCE - HAVE A QUESTION?

EQUIPMENT FOR HIRE OR FOR SALE