Search results for: 'hours for side in case rang auburn al'

Includes; - 2x Complete Hammers (1x with a Hole Opener) - 1x Hammer in parts (Can Assemble with New Casing) - 17x Various Sized Shrouds (Mostly New) - 10x Bits (5x New & 5x Had One Run but Nearly New) - 7x Hammer Tubes - 4.5" Inch Remet to Metzke Hammer Adaptor and Inner Tubes - Various Other Spares S Reps 750 Gear Package Location: Western Australia Learn More

Make: Caterpillar Model: 16M Year: 2012 Hours: 10,192 Engine: Caterpillar CAT C13 Tyres: Michelin 23.5R25 - Cab A/C & Heater - Push Block - 16' Blade - MS Ripper - Mine Spec - EPA Tier 3 Motor Grader Location: Chile Learn More

Model: OIE187 Cannon Fan: 425,000 m3/hr / Dual Fiber Glass PAG Impeller Discharge Hose: 1.5" Inch & 500 PSI High Pressure Pump: 7-8 Bars Discharge Fan Power: 130 kW Pump Power: 55 kW Pump Flow: 150 m3/hr Evaporation Rate: 24.98 lps @ 60% Daily Operating Time: 10 Hours + - SS Ring with Nozzles - Spiral Nozzle SS316 - Fan Safeguard Mesh - Control Panel Generator Make: Shanghai Stamford Brushless Engine: Dongfeng Cummins Control System: HGM6110 Large Screen Radiator: Engine Standard Matching Fuel Tank: 1,000 Litres Battery: 2x Camel 12V Weight: 6,000 kg approx. - Waste Water Handling - Dewatering Process - Tailing Dams - Water Production - Rainstorm Water Clearance Water Evaporator Location: Queensland, Australia Learn More

Make: Twistdrill Model: TWDTH-700 Year: 2023 Hours: 10 Geotech Drill Rig Location: Western Australia Learn More

Rig Make: Edson Model: 6000 Hours: 6,881 Rig Truck Make: Volvo Model: FL7 Year: 1989 KM’s: 2,305 Type: 8x4 GVM: 30,000 kg Support Truck with Crane Make: Volvo Model: FL10 Year: 1995 KM’s: 58,322 Type: 6x4 GVM: 24,000 kg Crane Make: Hiab Year: 1987 Water Well Drilling Package Location: Western Australia Learn More

Model: OIE187 Cannon Fan: 425,000 m3/hr / Dual Fiber Glass PAG Impeller Discharge Hose: 1.5" Inch & 500 PSI High Pressure Pump: 7-8 Bars Discharge Fan Power: 130 kW Pump Power: 55 kW Pump Flow: 150 m3/hr Evaporation Rate: 24.98 lps @ 60% Daily Operating Time: 10 Hours + - SS Ring with Nozzles - Spiral Nozzle SS316 - Fan Safeguard Mesh - Control Panel Generator Make: Shanghai Stamford Brushless Engine: Dongfeng Cummins Control System: HGM6110 Large Screen Radiator: Engine Standard Matching Fuel Tank: 1,000 Litres Battery: 2x Camel 12V Weight: 6,000 kg approx. - Waste Water Handling - Dewatering Process - Tailing Dams - Water Production - Rainstorm Water Clearance Water Evaporator Location: Queensland, Australia Learn More

Make: Epiroc Model: DM-L Year: 2005 Hours: 8,453 Engine: Cummins QSX15 Tier 3 - 33.5" Inch Triple Grouser Tracks - 30' Foot Tower Carousel - Can be set up for 5.5" Inch or 6.25" Inch Rods - 4 or 5 Pieces Air End Track Mounted Rotary Drill Rig Location: United States of America Learn More

Make: Caterpillar Model: 16M Year: 2008 Hours: 37,752 (Frame) / 5,834 (After Overhaul) Engine: Caterpillar CAT C13 - Complete Overhaul in 2022 Motor Grader Location: United States of America Learn More

Make: Caterpillar Model: D10T2 Year: 2020 Hours: 9,500 Includes; - SU Blade & Single Shank - Platforms & Walkways - Self-Closing Gates - Battery & Starter Isolation - Turbo blanket Isolators - Ground & Cab Mounted E-Stops - Fire Suppression - 2x 9kg Fire Extinguishers - Auto Grease System - Platform /Walkway - AM/FM Radio - UHF - Breath Safe - Fast Fuel Fit - LED work lights - Poly Sign Box - Reflective Tape - Caterpillar Fast Fuel System - Good A/C Track Mounted Bulldozer Location: Queensland, Australia Learn More

Make: Caterpillar CAT Model: D10T Year: 2009 Hours: 12,000 Track Mounted Bulldozer Location: Brazil Learn More

Make: Atlas Copco Model: ROC L8-64 Year: 2007 Hours: 5,380 (Approx. 22,000 total hours) Engine: Caterpillar CAT C13 - Atlas Copco XRV9 Air Compressor - Extensive Parts and Consumables Available (not included but can be negotiated) Track Mounted Reverse Circulation Drill Rig Location: Western Australia Learn More

Rig Make: Hanjin Model: D&B-8D Year: 2016 Hours: 5,800 Pull: 6 Metres - 1x Set of NQ Jaws *New* - 1x Set of HQ Jaws *New* - Cameron Water Gauge *New* - Wrap Around Mast - SPT Hammer Included - Rod Racks - Suction Hose and 2x Double Braid 1" Inch Duffield Bypass Hoses - 5x 100 mm Augers and 1x Bit Plus Drive Sub - 1 1/2" Inch Centrifugal Pump and Hoses - Plus Camlocks *All New* - 36" Inch & 24" Inch Stilsons - Chain Wrench - 1.5 Metre NMLC Core Barrel Plus 5x 3 Metre NQ Rods - 2x Mud Tanks - 7x5' Foot Box Trailer Tracked Mounted Drill Rig Location: New South Wales, Australia Learn More

Rig Make: UDR Model: 650 Hours: 9,202 - Commissioned Mid 2023 - Onboard PTO Driven Air Compressor - New water pump - New fan belts - New radiator core - Recent service with oil & new filters - New rod & piston seals to main feed Ram - New Dump Mast Ram - New rods & seals to mast raise rams - New side shift ram - New break out ram - New rod crane raise ram - New hydraulic valve blocks in control cabinet for main pump & secondary pump controls - New micro control fine feed controller - Replaced majority of gauges with new - New main rotation shaft seals & speedy sleeves - New main rotation torque control cartridge - New hammer oiler pump - New seats & O rings in majority of valve banks Air Compressor - New Air / Oil separator filter - New Oil stop valve - New Castrol Aircoil 68 synthetic oil - New filters - Recently been serviced by Midcoast Compressors Truck Make: MAN Year: 1997 KM's: 200,000 Type: 8x8 Transmission: Recon 18 Speed Gear Box - Kevrek 1500 Hiab Crane with Winch & Umbilical Cord Remote - Radiator back flushed - New Water Pump - New Fan Belts - New brake boosters on every wheel - New four way valve - New valve on brake pedal - Rebuilt Truck Compressor - New air on drivers seat - New air valves on diff locks / cross locks - New clutch, fly wheel & pressure plate - New bearings & seals in Dana drive box - New oil pump on Dana drive box - New universals on tail shafts - New ram on power steering - New tyres all around - All ball joints on truck replaced that were needed, or new rubbers on them - Recently passed Pit Inspection - 7 months Rego as Plant - No need for overhang permits; within length Truck Mounted Drill Rig Location: New South Wales, Australia Learn More

Make: Caterpillar Model: 14M Year: 2018 Hours: 7,168 - Rear Ripper MS - No EPA Grader Location: Chile Learn More

Drill Rig Make: UDR Model: 1500 Year: 2011 (Rebuilt) Hours: 3,517 Trailer Make: Hold Bros Year: 2013 ATM: 38 Tonne Jack Up Trailer Mounted Drill Rig Location: New South Wales, Australia Learn More

Drill Rig Make: American Augers Model: DD90-DD140 HDD Hours: 2,198 Trailer Make: Fontaine Trailer Company Year: 1992 Trailer Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Gardner Denver Model: FXXDFA Hours: 2,261 - Diesel Driven Skid Mounted Mud Pump Location: Queensland, Australia Learn More

Make: Gardner Denver Model: 5x10 Hours: 33 - Diesel Driven Skid Mounted Mud Pump Location: Queensland, Australia Learn More

Make: Gardner Denver Model: PAH Hours: 72 Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More

Make: Gardner Denver Model: PAH Hours: 20 Hydraulic Jack Up Mud Pump Location: Queensland, Australia Learn More