Search results for: 'spares personality of the year bearing url:mk7796 cfm dwq'

American Augers DD140 Track Mounted Drill Rig HDD SIS Package (POA) (sale-ehub4048)

For Sale

$0.00

Drill Rig Make: American Augers Model: DD140 Control Room Capacity: 20’ Foot Storeroom Capacity: 10’ Foot Genset Make: Kubota Model: GL9000D-AU-B Serial No: K10450 Capacity: 9kVA Control Room Trailer Make: Krueger Model: ST338 Year: 2008 ATM: 38 Tonne VIN: 6FH9079AB8M012264 - Trailer Pipe Handler Trailer Make: Gallagher Year: 2024 Max. Lifting Capacity: 1,100 kg - Purpose built Tandem Axle Trailer on airbag suspension with EBS braking - 4x Hydraulic Jack Legs - Self-Contained other than using the DD140 Auxiliary Hydraulics - Can present Horizontal Rod/Casing/BHA from a rod bench & install into the machine - Supplied with requested dies to suit rods, casing & BHA equipment - Full operational dash, with E-Stops on various positions - Complete working deck between the rig & road loader Including; - Rig Sub Base and Drill Floor Not Included; - Koomey Unit (in Photos) Track Mounted Drill Rig Package Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	DD140

Add to Wish List Add to Compare

Boart Longyear LS600 / BL600C Track Mounted Multipurpose Sonic Drill Rig & 2011 Morooka Track Mounted Support Unit ($USD550,200 / $USD700,650 w/ Sonic Heads) (sale-ehub4047)

For Sale

$0.00

Rig Make: Boart Longyear Model: LS600 / BL600C Hours: 5,905 (New Engine Fitted in 2023 – Only a few hundred hours since) - 2x Boart Longyear BLY150 Reconditioned Sonic Heads (Ready to go and can be included) - Head Spares and some other big spares Support Unit Make: Morooka Hours: 423 Year: 2011 Track Mounted Multipurpose Sonic Drill Rig Support Unit Location: Scotland Learn More

Machine hours	5,905 / 423	KILOMETERS	N/A
YEAR	2011	BRAND	Boart Longyear
LOCATION	Scotland	MODEL	LS600 / BL600C

Add to Wish List Add to Compare

2009 Nissan Patrol DX GU MY08 4x4 Ute ($30,000) (sale-ehub4044)

For Sale

$30,000.00

Make: Nissan Model: Patrol DX GU MY08 Year: 2009 KM's: 282,381 Transmission: 5 Speed Manual Type: 4x4 - New Engine at 241,000 km's - Clutch and Flywheel - 3" Inch Exhaust - Long Range Tank - Water Tank - 2x Spare Tyres - Full Mine Spec (inc. UHF, High Vis, etc.) Ute Location: Western Australia Learn More

Machine hours	N/A	KILOMETERS	282,381
YEAR	2009	BRAND	Nissan
LOCATION	Western Australia	MODEL	Patrol DX GU MY08

Add to Wish List Add to Compare

4x UDR Foot Clamps (Open to Offers) (sale-ehub4036)

For Sale

$0.00

Style: UDR - No Backing Plates or Jaws but can access them Quantity: 4 Foot Clamps Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	UDR
LOCATION	Queensland, Australia	MODEL	N/A

Add to Wish List Add to Compare

2005 Geoprobe 6620DT Track Mounted Drill Rig ($99,000 ex GST) (sale-ehub4035)

For Sale

$99,000.00

Make: Geoprobe Model: 6620DT Year: 2005 Hours: 7,417 - Mine Spec Compliant Safety Cage - New Rubber Tracks - Great Capacity for Small Footprint Track Mounted Drill Rig Location: Western Australia Learn More

Machine hours	7,417	KILOMETERS	N/A
YEAR	2005	BRAND	Geoprobe Systems
LOCATION	Western Australia	MODEL	6620DT

Add to Wish List Add to Compare

UDR KL1500 Carrier Mounted Drill Rig (POA) (sale-ehub4030)

For Sale

$0.00

Make: UDR Model: KL1500 Push Down: 15,080 kg Pull Back: 19,000 kg Compressor: Atlas Copco 1,100 CFM / 400 PSI Rod Handler: UDR KL Pipe Handler - Maker Breaker Jaws - No Rods Included - No Cyclone Specifications: Width: 2.7m Length: 13.8m Height (Mast Down): 4.4m Height (Mast Up): 14m Weight: 39,850kg Carrier Mounted Drill Rig Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	UDR
LOCATION	Queensland, Australia	MODEL	KL1500

Add to Wish List Add to Compare

2020 Komatsu WA 900-8 Wheel Loader (POA) (sale-ehub4018)

For Sale

$0.00

Make: Komatsu Model: WA 900-8 Year: 2020 Hours: 14,212 Wheel Loader Location: United States of America Learn More

Machine hours	14,212	KILOMETERS	N/A
YEAR	2020	BRAND	Komatsu
LOCATION	United States of America	MODEL	WA 900-8

Add to Wish List Add to Compare

2006 Caterpillar CAT C15 Skid Mounted Engine ($59,000 ex GST) (sale-ehub4016)

For Sale

$59,000.00

Make: Caterpillar Model: C15 Year: 2006 Hours: 1,533 • 440 HP @ 2,100 RPM • 1482LB-FT @ 1,400 RPM • Air to Air intercooled • 12 Volt (We can covert to 24 Volt if required) • SAE #1 flywheel housing multi fit industrial flywheel. • If required, we can supply and install a Caterpillar Air Compressor to the motor which runs off the auxiliary drive. The motor has been removed from the unit and fully workshop inspected and run up under load on the Dyno, results are as follows: Workshop inspection: • Intake manifold clean. • Cylinder head and rocker gear clean, no moisture or sludge, tune ok. • Turbocharge in nice condition, no excessive shaft play. • Camshaft in nice condition, no pitting • Crankshaft in good condition (Standard) • Main bearings and Con rod bearings in good condition – minimal wear • Crankshaft end float within spec Load test Report • Oil pressure: Cold Idle 70psi / Cold Top Revs 85psi / Hot Idle 50psi / Hot Top Revs 75psi • Water temps: Top Radiator 92 degrees. Bottom Radiator 69 degrees. • Thermostat opened and engine recovered correctly. • Turbocharger boost: 23 PSI @ 2,100 RPM • Breathing/ Blow by: 20 mm @ idle 30 mm @ 1,200 RPM 50 mm @ 1,350 RPM. 120 mm @ 1,800 RPM. • Smoke condition: small amount of black on startup, none at idle and very small white under full load. Skid Mounted Engine Location: Queensland, Australia Learn More

Machine hours	1,400	KILOMETERS	N/A
YEAR	2006	BRAND	Caterpillar CAT
LOCATION	Queensland, Australia	MODEL	C15

Add to Wish List Add to Compare

2010 Ubuilt Cassady CTU Coil Tubing Unit Mounted on 2005 Ensign Carrier ($295,000 ex GST) (sale-ehub4015)

For Sale

$295,000.00

Make / Model: Ubuilt Cassady CTU Carrier & Booster OD Year: 2010 Hours: 310 Engine: John Deere ATM: 61,500 kg Trailer Make: Ensign Model: C.T. 1000 Year: 2005 Tyre Size: 275/70R22.5 Rim Size: 8.25x22.5 Axle Group Load Carrying Capacity: 37,500 kg - Handrail and Stair Upgrade by Obadare CTU Coil Tubing Unit Carrier Mounted Location: Queensland, Australia Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2010	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	Ubuilt Cassady CTU Carrier & Booster OD

Add to Wish List Add to Compare

2009 & 2018 Caterpillar CAT D8T Track Mounted Bulldozer (POA) (sale-ehub4005)

For Sale

$0.00

Make: Caterpillar Model: D8T Year: 2009 & 2018 Hours; 2009: 10,723 2018: 15,100 - EPA Tier 3 (2009) / Tier 3 (2018) - MS Ripper (2009) - SS Ripper (2018) Track Mounted Bulldozer Location: Chile Learn More

Machine hours	10,723 & 15,100	KILOMETERS	N/A
YEAR	2009	BRAND	Caterpillar CAT
LOCATION	Chile	MODEL	D8T

Add to Wish List Add to Compare

2007 Drill Rig Mounted on 2007 Isuzu FTS 750 4x4 Table Top Truck ($145,000 ex GST) (sale-ehub4003)

For Sale

$145,000.00

Rig Year: 2007 Hours: 3,000 Engine: Caterpillar (85 HP) Stroke: 3,300 mm - 2 Speed Head Rotation Torque: 2,500/450 Nm Rotation Speed: 140/750 RPM Pullback: 7,000 kg Pull Down: 4,000 kg - Set up for Geotechnical Drilling with Auto SPT - 1x Main Winch - 2x Wireline Winch - Mono Pump - Four Jack Legs - Drilling Rods, Alloy Mud Tanks, Accessories for 50 m (All in Good Condition) Truck Make: Isuzu Model: FTS 750 Year: 2007 KM's: 55,000 Type: 4x4 Table Top Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Machine hours	3,000	KILOMETERS	55,000
YEAR	2007	BRAND	N/A
LOCATION	Queensland, Australia	MODEL	N/A

Add to Wish List Add to Compare

TT300 Trailerised Drill Rig + Volvo FH12 460 Truck with Atlas Copco XRV1200 Air Compressor & More Package (POA) (sale-ehub3999)

For Sale

$0.00

Rig Model: TT300 Hours: 18 Engine: Deutz F6L912 / 66 kW Rated Depth Capacity: 300 m Feed Cylinder: 100 mm Barrel / 70 mm Shaft / 4 m Stroke Outrigger (Jacks): 4x Boxed Outriggers with 800 m Stroke Foam Pump: 21 Litre per min / 35 bar Foam/Water Tank: 120 Litre Axles: 2x 5 Tonne Air Braked Axles Tower: Direct on Cylinder / Triangle Shape Winch: 1 Tonne Push Down Force: 5,000 kgf @ 175 bar Pull Up Force: 13,000 kgf @ 175 bar Tilt Cylinders: 2x 80 Barrel 50 Shaft Breakout: 300 mm Stroke Cylinder Hydraulic Oil Tank Capacity: 330 Litres - Hydraulic Oil Cooler - Extended Tower to accommodate 4 m Stroke Cylinder - Spanners Included: 1x Breakout / 2x Keeper / 3x Hammer Modifications; - Hydraulically Tilt Rotary Head - Rotary changed to geared Rotary Head with Hollow Spindle (8,000 Nm Torque) - Including 2x Eaton Hydraulic Motors - Side Shift (on rotary head – opens up the tower for longer casing, etc.) Support Truck Make: Volvo Model: FH12 460 KM’s: 1,040,378 Type: 8x4 Air Compressor Make: Atlas Copco Model: XRV1200 Year: 2020 Hours: 122 Engine: Cummins Pressure: 22.7 bar / 330 PSI Engine/Motor Speed: 1,900 RPM Engine/Motor Power: 325 kW / 430 HP 1,200 CFM / 330 PSI - Included Drill Bits, Rods and Drilling Equipment Trailerised Drill Rig Support Truck Air Compressor Package Location: New Zealand Learn More

Machine hours	18	KILOMETERS	1,040,378
YEAR	2020	BRAND	N/A
LOCATION	New Zealand	MODEL	TT300

Add to Wish List Add to Compare

Schramm T660 H Rotadrill Track Mounted Drill Rig (POA) (sale-ehub3996)

For Sale

$0.00

Make: Schramm Model: T660 H Rotadrill Engine: Caterpillar CAT 3406B DITA @ 450 HP Pulldown: 30,000 lbs Pullback: 44,000 lbs Capacity: 5" Inch Rams / 350 m R/C 4 1/2" Inch Remet Rods Stroke: 6.5 m Top Drive: R/C Head Twin Motor 2 Speed / 0-160 RPM @ 38,000 lbs / 0-53 RPM @ 75,000 lbs Onboard Air Compressor: Sullair 900 CFM / 350 PSI Mounting: Caterpillar CAT 325 Wide Track Track Mounted Drill Rig Location: New Zealand Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	Schramm
LOCATION	New Zealand	MODEL	T660 H

Add to Wish List Add to Compare

2017 Sandman Mission Magnum Sandmaster 8x10x14 Trailerised Mud Pump ($67,500 ex GST) (sale-ehub3994)

For Sale

$67,500.00

Mud Pump Make: Sandman Model: Mission Magnum Sandmaster 8x10x14 Year: 2017 Engine: Cummins 6 Cylinder Diesel w/ Clutch - 8 Valve Discharge Manifold on back - 2x 8 Valve Suction Manifold on each side - Flow Meter Trailer Year: 2012 - Pindle Hitch Dimensions; Width: 7.6' Length: 16' Tyres: 245/70R17.5" Trailerised Mud Pump Location: New Zealand Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2017	BRAND	N/A
LOCATION	New Zealand	MODEL	Mission Magnum Sandmaster 8x10x14

Add to Wish List Add to Compare

2007 HD Engineering HR9000 Rotation Head (POA) (sale-ehub3992)

For Sale

$0.00

Make: HD Engineering Model: HR9000 Year: 2007 Rotation Head Location: New Zealand Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2007	BRAND	N/A
LOCATION	New Zealand	MODEL	HR9000

Add to Wish List Add to Compare

2023 XCMG XE55U Track Mounted Excavator ($105,000 ex GST) (sale-ehub3991)

For Sale

$105,000.00

Make: XCMG Model: XE55U Year: 2023 Hours: Less than 500 Includes; - Hammer - Auger Driver - 450 mm Auger - 300 mm Auger Track Mounted Excavator Location: New South Wales, Australia Learn More

Machine hours	Less than 500	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	New South Wales, Australia	MODEL	XE55U

Add to Wish List Add to Compare

2012 ZJ50D/3150 Drill Rig (FOR HIRE/RENT - POA) (hire-ehub3991)

For Hire

Rig Model: ZJ50D/3150 Year: 2012 Mast Model: JJ315/45-K6 Substructure Model: DZ3159-S Drawworks Model: JC50D Power: 1,500 HP Rotary Table Model: ZP-375 Full Opening: 37.5” Inch Rotary Speed: 300 RPM Mud Pump Power: 1,600 HP Stroke: 120 RPM Working Pressure: 5,000 PSI Quantity: 2x Mud Tank Shaker Tank: 25 CuM Intermediate Tank: 40 CuM Suction and Mixing Tank: 20 CuM Solids Control - 3x Shale Shaker - 1x Mud Cleaner - 1x Centrifuge Drill Rig Location: Japan Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	N/A	BRAND	N/A
LOCATION	Japan	MODEL	ZJ50D/3150

Add to Wish List Add to Compare

10x 2021 Komatsu HD465-7E0 Dump Trucks (POA) (sale-ehub3989)

For Sale

$0.00

Make: Komatsu Model: HD465-7E0 Year: 2021 Hours: 9,000 - 17,280 Quantity: 10 Dump Trucks Location: China Learn More

Machine hours	9,000 - 17,280	KILOMETERS	N/A
YEAR	2021	BRAND	Komatsu
LOCATION	China	MODEL	HD465-7E0

Add to Wish List Add to Compare

5x 2018 & 3x 2019 Caterpillar CAT 745 Dump Trucks (POA) (sale-ehub3984)

For Sale

$0.00

Make: Caterpillar Model: 745 Year: 2018 & 2019 Quantity: 3x 2019 / 5x 2018 - No EPA or CE Condition: Excellent & Good Tyres Dump Trucks Location: Chile Learn More

Machine hours	N/A	KILOMETERS	N/A
YEAR	2018	BRAND	Caterpillar
LOCATION	Chile	MODEL	745

Add to Wish List Add to Compare

2007 Atlas Copco RD20-III Carrier Mounted Drill Rig (POA) (sale-ehub3983)

For Sale

$0.00

Make: Atlas Copco Model: RD20-III Year: 2007 Hours: 7,500 - In Good Working Order - Full Service Report Available This used 2007 RD20 Range III Atlas Copco Rig is a powerful and versatile drilling machine, ideal for a wide range of applications. Equipped with on IR 1,250 CFM / 350 PSI Air Compressor, this rig delivers exceptional performance and efficiency. Powered by a robust CAT C13 engine, the rig ensures smooth operation and ample power. The Cummins QSK19 deck engine further enhances its performance capabilities, delivering 755 HP for demanding drilling tasks. With a substantial pullback capacity of 120,000 lbs (54,446 kg), this rig can handle tough drilling conditions with ease. Mounted on a crane carrier truck, this RD20 III Atlas Copco Rig provides excellent mobility and stability. The rig has been meticulously maintained to ensure optimal condition and longevity. Its clean appearance reflects the owner’s commitment to proper care and maintenance. Carrier Mounted Drill Rig Location: New South Wales, Australia Learn More

Machine hours	7,500	KILOMETERS	N/A
YEAR	2007	BRAND	Atlas Copco
LOCATION	New South Wales, Australia	MODEL	RD20-III

Add to Wish List Add to Compare

Search results for: 'spares personality of the year bearing url:mk7796 cfm dwq'

AUSTRALIA WIDE SERVICE

REQUIRE ASSISTANCE - HAVE A QUESTION?

EQUIPMENT FOR HIRE OR FOR SALE