DRILLING

Make: Schramm Model: 660 Hours: 842 Track Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Schramm Model: T450GT Rotadrill Year: 2016 (Rebuilt) Frame Hours: Unknown Engine Hours: 0 (Brand New Rebuilt Caterpillar 3406 Engine @ 550 HP) Compressor Hours: 0 (Brand New Rebuilt Air Compressor) - Recently Rebuilt Head - $350,000 Circa at the end of 2023 and no work since - Smart Management System Installed Includes; - KL Rod Handler - 180 m Near New 4" Inch RC Harlsan Pipe - Remote Tramming - V-Pack Cooler - New Flagging Track Mounted Drill Rig Location: Western Australia Learn More

Rig Make: Schramm Model: 450 Year: 2006 Hours: 2,078 Engine: Cummins KTA19 (Fully Rebuilt June 2022) Max Pull Back: 4.5" Inch (-60 Degrees) 14 Tonne Onboard Air Compressor: Ingersoll Rand HR2 1,050 CFM / 350 PSI (Fitted New June 2022) Onboard Pump: Bean W1122 Water Pump (200 LPM @ 1,000 PSI) Gross Weight: 26.5 Tonne - 2x New Fitted Danfoss P193 Main Pumps (with Flexible Coupling Conversion - June 2022) - Twin Beacons - GME XRS Connect 2 Way Radio + Bluetooth - KL Rod Handler - Dump Mast - Ox Combination Swivel - Feaver Tools Rotating Blow-Down - 2x New Rotation Motors (Fitted June 2023) - TJM Hydraulic Breakouts - Fire Suppression - Survey Winch - Cyclone Arm fitted with Cyclone/Cone Splitter - 2x Spare Tyres (New) Rig Truck Make: Mercedes Benz Model: Actros Year: 2019 KM's: 46,788 Type: 6x6 - Fitted with All-Terrain Tyre Package Support Truck Make: Tatra Model: Phoenix Year: 2021 KM's: 33,231 Type: 8x8 - 6,000 Litre Fuel Tank with Wiggins Fast Fill - 3,500 Litre Water Tank with Stand-Pipe Fill Point and Pump Connections (2" Inch & 1" Inch Outlets x2) - Triple Spare Tyre Storage - 2x Hydraulic Tyre Carriers at front - Husky Air-Diaphragm Fuel Pump with Graco 1" Inch Hose Reel - PVC Casing Rack - Tube Storage Rack - Rod Storage for 400 metres @ 4.5" Inch - 4x Side Cupboards - 2x Front Cupboards with underneath oils storage - High View Tail Lights and Twin Beacons - Irvin Bull Bar - GME XRS Connect 2 Way Radio + Bluetooth Truck Mounted Drill Rig Location: Western Australia Learn More

Rig Make: Schramm Model: 685 Year: 1990 Hours: 251 Engine: Detroit 60 Series PTO Diesel Driven Accessories: Rod Handler, KL Rod Handler, etc. Major Repairs or Replacements; - New Fuel Pump - One New Hydraulic Pump - Rebuilt Drill Head - Numerous Repairs on going to keep the drill in a clean state Truck Make/Model: Custom Year: 1982 KM's: 6,170 Type: 8x8 Truck Mounted Drill Rig Location: Western Australia Learn More

Make: Schramm Model: 685 Year: 1996 Hours: 2,500 approx. since rebuild Engine: Cummins KT19 Includes; - Onboard Air 1350/350, 1150/500 - Comes with 330m of 4.5" Inch Metz RC Pipe - Rotating Cyclone Set Up on Metz Manipulator - Airdrill Maker Breaker - Air Spanner - KL Rod Handler Set to 4.5" inch Pipe - Dual RC Swivel and Auto Blow Down - ROPS Air Conditioned Drillers Cabin - Comes with a Carousel - Has been removed - 20m Sample Hose - 20 Spare Inner Tubes Track Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Schramm Model: Typhoon Hours: 5,294 Engine: John Deere 4045DF150 Diesel Skid Mounted Booster Location: Western Australia Learn More

Cyclone & Splitter - Both units have come off a Schramm 685 Drill Rig Location: Western Australia Learn More

Splitter - Unit has come off Schramm 685 Drill Rig Location: Western Australia Learn More

Cyclone - Unit has come off Schramm 685 Drill Rig Location: Western Australia Learn More

Make: Schramm Model: T660WS Hours: 8,800 Engine: Cummins N14E - Airdrill Breakout - VGC - Sullair 1050 CFM / 350 PSI Air Compressor Truck KM's: 1,481 Type: 8x4 - X Locks - Air Conditioning Truck Mounted Drill Rig Location: Western Australia Learn More

Make: Schramm Model: T130 Drill Rig Rotation Head Location: Queensland, Australia Learn More

Power Pack w/ Diesel Engine Mod. 56 D Engine: Lombardini KDI 1903 TCR Engine Power: 41 kW @ 2,600 RPM / 56 HP @ 2,600 RPM Main Pump: 120 lpm @ 200 bar / 31.70 gal/min @ 2,900 PSI Oil Tank: 150 Litres / 39.6 Gal Fuel Tank: 70 Litres / 18.48 Gal Cooling: Separate Oil Air Exchanger Power Pack w/ Gasoline Engine Mod. 23 B Engine: Brigg & Stratton Engine Power: 17 kW @ 3,000 RPM / 23 HP @ 3,000 RPM Main Pump: 40 lpm @ 160 bar / 10.56 gal/min @ 2,320 PSI Oil Tank: 50 Litres / 13.2 Gal Fuel Tank: 20 Litres / 5.28 Gal Cooling: Separate Oil Air Exchanger Weight: 150 kg / 330 lbs Condition: New Location: Italy Learn More

Make: Marini Model: MR-S Line MCDP 80x80 Weight: 374 lbs / 170 kg Feed Stroke: 2,160 mm / 7.09 ft Feed Force: 1,250 daN / 2,810 lbf Retract Force: 1,250 daN / 2,810 lbf Rotary Head Max Rotation Torque: 160 daNm / 1,180 lbft Max Rotation Speed: 30 RPM Rock Drill Max Rotation Torque: 30 daNm / 221 lbft Max Rotation Speed: 60 RPM Drilling Slides The MR–S MCDP 80×80 drilling slide is powered with a pneumatic piston feeding motor, can be equipped with 4” DTH hammer (with Marini EP95 and EP 30 / 160 rotation head), with 58 Kg rock-drill with separate right and left rotation (Marini MA 100 rock-drill) or with a rotopercussion pneumatic rock-drill (Marini MA90 rock-drill). Condition: New Location: Italy Learn More

Make: Marini Model: MR-S Line Series: 100 Weight: 771 lbs / 350 kg Feed Stroke: 2,160 mm / 7.09 ft Feed Force: 1,000 daN / 2,248 lbf Retract Force: 1,500 daN / 3,372 lbf Rotary Head Max Rotation Torque: 350 daNm / 2,581 lbft Max Rotation Speed: 40 RPM Rock Drill Max Rotation Torque: 100 daNm / 737 lbft Max Rotation Speed: 100 RPM Clamp Range Mod 25/115: 25 / 115 mm (0.98 / 4.5 in) Mod 70/188: 25 / 188 mm (0.98 / 7.40 in) Drilling Slides The MR–S 100 drilling slides are powered by an hydraulic feeding cylinder, can be equipped with 4” DTH hammer (with Marini ID 160 and ID 300 rotation head), with 58 kg hydraulic rock-drill with separate right and left rotation (Marini MA 100 rock-drill) or with a rotopercussion pneumatic rock-drill (Marini MA90 rock-drill). Condition: New Location: Italy Learn More

Make: Marini Model: MR-T Line Type: Mobil Fil & Mini Mobil Fil Main Motor / Length / Width / Height / Weight: 20 HP (15 kW) / 1,300 mm / 900 mm / 1,000 mm / 920 kg (2,028 lb) 25 HP (18 kW) / 1,300 mm / 900 mm / 1,000 mm / 950 kg (2,094 lb) 60 HP (45 kW) / 2,200 mm / 1,450 mm / 1,550 mm / 1,860 kg (4,100 lb) 75 HP (55 kW) / 2,200 mm / 1,450 mm / 1,550 mm / 1,900 kg (4,189 lb) Device Can be Used for the Below: - Starting & Finishing Cutting - Horizontal Cutting - The "Blind Cut" - 90 Degree Cut - Block Squaring Diamond Wire Sawing Machine *Can be Track Mounted* - Wire speed and backward speed controlled by INVERTER which grants the electronic diamond wire tensioning. All models can execute, even large cuttings, in any direction and razed to the ground. - The machine allows the execution of parallel cuts with a maximum distance of 2 meters avoiding tracks movement, thanks to the lateral translation and complete rotation of the main flywheel. Condition: New Location: Italy Learn More

Make: Marini Model: MR-C Line Series: 10 Type: Crawler Diesel Engine: Lombardini LDW 1003 Engine Power: 17 kW (23 HP) @ 3,000 RPM Main Pump: 40 lpm @ 200 bar (10.56 gal/min @ 2,900 PSI) Fuel Consumption: 2.5 l/h (0.66 gal/h) Feed Stroke: 1,760 mm / 5.77 ft Feed Force: 1,000 daN / 2,248 lbf Retract Force: 1,500 daN / 3,372 lbf Max Rotation Torque: 160 daNm / 1,180 lbft Max Rotation Speed: 60 RPM Weight: 2,866 lbs / 13,000 kg Drill Rig - MR–C 10 Mobile drilling unit suited to execute vertical, horizontal or inclined holes. Self moving wagon unit with rubber tracks, powered by a hydraulic power pack with 23 hp diesel or petrol motor (electric motor upon request). - On the MR–C 10 is installed a CID 100 mast (extraction force 1000 daN) which can be equipped with a DTH hammer rotary head torque 350 Nm ( MARINI mod. ID300 ), a coring head (MARINI mod. ID CD) or rock-drill with separated rotation ( MARINI mod. MA100 ). - Like all Marini units, the MR–C 10 can be customized in relation to the different needs. Condition: New Location: Italy Learn More

Make: Marini Model: MR-C Line Series: 50 Type: Crawler Diesel Engine: Deutz TCD 3.6 L4 Tier 4 Final Engine Power: 80 kW (107 HP) @ 2,200 RPM Main Pump: 250 lpm @ 250 bar (66.1 gal/min @ 3,626 PSI) Fuel Consumption: 6 l/h (1.58 gal/h) Feed Stroke: 2,500 mm / 8.20 ft - 3,500 mm / 11.48 ft Feed Force: 5,000 daN / 11,240 lbf Retract Force: 5,000 daN / 11,240 lbf Max Rotation Torque: 500 / 250 daNm (3,688 / 1,844 lbft) Max Rotation Speed: 40 / 80 RPM Weight: 16,535 lbs / 7,500 kg Drill Rig - The MR–C 50 is a mobile drilling unit remote controlled with separable hydraulic power pack, optimized for all the works of civil engineering, core drilling, micro piles, anchors and consolidations. - Suitable to work in narrow spaces and difficult to access, it can be equipped with the new modular mast CID 300 (extraction force 5000 daN) and it’s particularly powerful hydraulic station able to provide 107 HP, to operate any kind of hydraulic rock-drill or down-the-hole hammer and perform any type of drilling job. - Like all Marini units, the MR–C 50 can be customized in relation to the different needs. Condition: New Location: Italy Learn More

Make: Marini Model: MR-C Line Series: 90 Type: Crawler Diesel Engine: Deutz TCD 4.1 L4 Tier 4 Final Engine Power: 115 kW (154 HP) @ 2,400 RPM Main Pump: 250 lpm @ 250 bar (66.1 gal/min @ 3,626 PSI) Fuel Consumption: 6 - 7 l/h (1.6 - 1.86 gal/h) Feed Stroke: 3,500 mm / 11.48 ft Feed Force: 5,000 daN / 11,240 lbf Retract Force: 5,000 daN / 11,240 lbf Max Rotation Torque: 500 / 250 daNm (3,688 / 1,844 lbft) Max Rotation Speed: 40 / 80 RPM Weight: 33,069 lbs / 15,000 kg Drill Rig - The MR-C 90 is an hydraulic self-propelled crawler drilling unit powered by 154 HP engine for micropiling, rock anchoring and soil reinforcement by self-anchoring rods. - The machine can be equipped with all roto-percussion system, DTH hammer and coring tools. Totally radio controlled, it is the ideal solution for the most demanding drilling in all specialized civil engineering works. - Like all Marini units, the MR – C 90 can be customized in relation to the different needs. Condition: New Location: Italy Learn More

Make: Marini Model: MR-C Line Series: 15 Type: Crawler Diesel Engine: Lombardini LDW 1003 Engine Power: 17 kW (23 HP) @ 3,000 RPM Main Pump: 40 lpm @ 200 bar (10.56 gal/min @ 2,900 PSI) Fuel Consumption: 2.5 l/h (0.66 gal/h) Feed Stroke: 1800 mm / 5.90 ft Feed Force: 2,000 daN / 4,496 lbf Retract Force: 2,500 daN / 5,620 lbf Max Rotation Torque: 160 daNm / 1,180 lbft Max Rotation Speed: 60 RPM Weight: 3,307 lbs / 1,500 kg Drill Rig - MR–C 15 Mobile drilling unit suited to execute vertical, horizontal or inclined holes. - Self moving wagon unit with rubber tracks, powered by a hydraulic power pack with 23 hp diesel or petrol motor (electric motor upon request). - On the MR–C 15 is installed a CID 120 mast (extraction force 2500 daN) which can be equipped with a DTH hammer rotary head torque 350 Nm ( MARINI mod. ID300 ), a coring head (MARINI mod. ID CD) or rock-drill with separated rotation ( MARINI mod. MA100 ). - Like all Marini units, the MR–C 15 can be customized in relation to the different needs. Condition: New Location: Italy Learn More

Make: Marini Model: MR-A Line Model Series: 500 Type: Pneumatic / Hydraulic Excavator Range: Over 25 Tonnes / Da 25 Tonnes Retract Force: 13,489 lbf / 6,000 daN Clamping Range: 12.20" Inch / 310 mm Weight: 7,716 - 9,920 lb / 3,500 - 4,500 kg Drill Attachment - Certified hydraulic drilling units ready to be installed on mini, midi and big self-propelled machines with the collaboration of the best known manufactures of excavators, telescopic handlers, spiders and aerial platforms. - The drilling equipment produced by MARINI QUARRIES GROUP are optimized for all civil engineering works coring, micro-piles, anchoring and reinforcement. - All drilling systems (roto-percussion, DTH hammer and coring) can be utilized with our equipment. Condition: New Location: Italy Learn More