DRILLING

Rig Make: UDR Model: 650 Year: 1991 - Cyclone - Splitter - Rod Handler Truck Make: Scania Model: 114c 380 Year: 2005 KM's: 196,941 Type: 6x6 GVM: 28,500 kg Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Drill Rig Make: UDR Model: KL 900 Year: 2005 Hours: 4,192 Engine: Cummins 6CTA 8.3 Litre - Repainted (2023) - Fire Suppression - Rod Spinner / Cage - All Subs P, H, N Foot Clamps (UDR) - 1,200 Litre Diesel Tank Truck Make: International Model: Acco T-Line T2670 Year: 1984 KM's: 202,977 Truck Mounted Drill Rig Location: Northern Territory, Australia Learn More

Replaced in both; - Hydraulic Ram - Tension Rod - L&R Couplings - Clamps have been 100% disassembled, reassembled and greased up - Jaw Holders supplied with the UDR but look unused (Can be purchased separately along with jaws) - Other Footclamp has Jaw Holders but look unused - Only x1 set is usable (HQ) as other jaws have been worn down to stubs (Can supply FOC for whom buys a clamp first) Quantity: 2 Footclamps Location: New South Wales, Australia Learn More

Make: UDR Model: 1000 Drill Rig Mast Location: South Australia Learn More

Drill Rig Make: UDR Model: 650 Year: 1995 Engine: Cummins 6BT - New Hoses and O' Rings throughout - Re-Painted 2 years ago - Hydraulic Bean Pump - Fuel Tank (Runs Rig & Truck) - Foot Clamps, Finger Plate Construction, Interchangeable - 96 Metres of 2 3/8" Inch IF Drill Rods - Ample Deck Space for Larger Mud Pump or Onboard Air Compressor Truck Make: International Model: T-Line 2670 Year: 1985 KM's: 248,000 Engine: Cummins (with Jake Breaks) - New Drive Tyres - New King Pins and Front Wheel Bearing - New Breaks - New Hoses on Engine - Full Chassis Sanded and Painted Recently Done for Roadworthy; - Cab Refit - Front Brakes - Replacement of Front Spring Hangers - Rear Diff Seals - Track Rod Bushers - New Front Indicators - Head Lights - Replacement Air Dump Valve Diaphragm - Engine is clean and no oil leaks Truck Mounted Drill Rig Location: Victoria, Australia Learn More

Rig Make: UDR Model: 650 Hours: 2,801 Includes; - Rod Handler - Cyclone - Splitter Rig Truck Make: MAN Model: TGS Series Year: 2009 KM’s: 68,221 Type: 8x8 Onboard Compressor (Drill Rig) Make: Sullair Model: 900/350 900 CFM / 350 PSI Truck Mounted Drill Rig Location: Queensland, Australia Learn More

Make: UDR / Sandvik Model: 1000 / DE840 Year: 2005 Engine: Cummins 6CTA8.3 - Hydraulic Rod Clamp - Top Drive Rotary Head - Hollow Floating Spindle - Onboard FMC W1122 Bean Pump - Onboard Sullair 1150 CFM / 350 PSI Air Compressor - Still operational but due for a rebuild Includes; - Mast Dump - Rod Spinner - Sandvik DA554 Rod Handler - RC Sampling System - Fire Suppression - Refurbished UDR1000 Mast/Tower Truck Make: MAN Type: 8x4 Truck Mounted Multipurpose Drill Rig Location: New South Wales, Australia Learn More

Make: UDR Model: 650 Drill Rig Mast Location: Queensland, Australia Learn More

Rig Make: UDR Model: 650 Year: 2007 - Fully Rebuilt June 2021 - Complete Service on Mercedes Truck before being parked - Complete Rewire & Control Panel for Sullair Compressor - Invoices and Documentation can be provided Includes; - 2006 Sullair 1,150 CFM / 350 PSI & 900 CFM / 500 PSI Air Compressor (Rebuilt & Installed Jan 2019) - 200x Metres of 4" Inch Remet Drill Rods (with Inner Tubes & Saver Subs) 80% New - 50x Metres of 4" Inch Remet Drill Rods + 3 1/2" Inch Gear (Blow Up Cap, Remet Tube Tester & 4" Inch Remet Box to 3 1/2" Inch Remet Pin Saver Subs) 100% New Rig Truck Make: Mercedes Benz Model: Actros 3244 Year: 2006 KM's: 52,228 Type: 8x4 Sea Container 2 - 20ft Powered - Cone Splitter - Set-up for 3 1/2" Inch Rod Handler Gear - Cage with Running Gear - 3x New Head Tubes - 3x New 4" Inch Rod Spanners - Spare Top Swivel - High Pressure Air Hoses 1 1/2" Inch - 2" Inch (some fully socked and variety of lengths) - Spare Wear Bend - 5x New Wear Blocks - Hydraulic Foot Clamps - Set - Spare Hose Cradle - Diamond Rod Cage - Extra UDR Consumables & Parts Sea Container 3 - 20ft - UDR Hammers and Bits - 4x 5" Inch HF 127 mm Bit - Extras - Bits/Subs/Tubes/Head Tubes - 4x RE542-RE543 Bit 127 mm 5" Inch HF - 2x New 543 Sandvik Hammers - 2x 543 Sandvik Hammers @ 60% - PR120 Hammer - 5x 111 mm 2-4.5" Inch New Remet Aircore Bits - 4x 111 mm 2-4.5" Inch Used Remet Aircore Bits - 5x Metzki Bits @ 50% - SR170 Hammer & 4 1/8" Inch TC Bit, Shroud & Inner Tube - 6" Inch Conventional Hammer with Bit Pallets Quantity: 4 - Spares Truck Mounted Drill Rig Package Location: Western Australia Learn More

Rig Make: UDR Model: 650 On Edson 3000 Truck Make: Mercedes Benz Model: 2632 V Series Truck Mounted Drill Rig Location: Northern Territory, Australia Learn More

Power Pack w/ Diesel Engine Mod. 56 D Engine: Lombardini KDI 1903 TCR Engine Power: 41 kW @ 2,600 RPM / 56 HP @ 2,600 RPM Main Pump: 120 lpm @ 200 bar / 31.70 gal/min @ 2,900 PSI Oil Tank: 150 Litres / 39.6 Gal Fuel Tank: 70 Litres / 18.48 Gal Cooling: Separate Oil Air Exchanger Power Pack w/ Gasoline Engine Mod. 23 B Engine: Brigg & Stratton Engine Power: 17 kW @ 3,000 RPM / 23 HP @ 3,000 RPM Main Pump: 40 lpm @ 160 bar / 10.56 gal/min @ 2,320 PSI Oil Tank: 50 Litres / 13.2 Gal Fuel Tank: 20 Litres / 5.28 Gal Cooling: Separate Oil Air Exchanger Weight: 150 kg / 330 lbs Condition: New Location: Italy Learn More

Make: Marini Model: MR-S Line MCDP 80x80 Weight: 374 lbs / 170 kg Feed Stroke: 2,160 mm / 7.09 ft Feed Force: 1,250 daN / 2,810 lbf Retract Force: 1,250 daN / 2,810 lbf Rotary Head Max Rotation Torque: 160 daNm / 1,180 lbft Max Rotation Speed: 30 RPM Rock Drill Max Rotation Torque: 30 daNm / 221 lbft Max Rotation Speed: 60 RPM Drilling Slides The MR–S MCDP 80×80 drilling slide is powered with a pneumatic piston feeding motor, can be equipped with 4” DTH hammer (with Marini EP95 and EP 30 / 160 rotation head), with 58 Kg rock-drill with separate right and left rotation (Marini MA 100 rock-drill) or with a rotopercussion pneumatic rock-drill (Marini MA90 rock-drill). Condition: New Location: Italy Learn More

Make: Marini Model: MR-S Line Series: 100 Weight: 771 lbs / 350 kg Feed Stroke: 2,160 mm / 7.09 ft Feed Force: 1,000 daN / 2,248 lbf Retract Force: 1,500 daN / 3,372 lbf Rotary Head Max Rotation Torque: 350 daNm / 2,581 lbft Max Rotation Speed: 40 RPM Rock Drill Max Rotation Torque: 100 daNm / 737 lbft Max Rotation Speed: 100 RPM Clamp Range Mod 25/115: 25 / 115 mm (0.98 / 4.5 in) Mod 70/188: 25 / 188 mm (0.98 / 7.40 in) Drilling Slides The MR–S 100 drilling slides are powered by an hydraulic feeding cylinder, can be equipped with 4” DTH hammer (with Marini ID 160 and ID 300 rotation head), with 58 kg hydraulic rock-drill with separate right and left rotation (Marini MA 100 rock-drill) or with a rotopercussion pneumatic rock-drill (Marini MA90 rock-drill). Condition: New Location: Italy Learn More

Make: Marini Model: MR-T Line Type: Mobil Fil & Mini Mobil Fil Main Motor / Length / Width / Height / Weight: 20 HP (15 kW) / 1,300 mm / 900 mm / 1,000 mm / 920 kg (2,028 lb) 25 HP (18 kW) / 1,300 mm / 900 mm / 1,000 mm / 950 kg (2,094 lb) 60 HP (45 kW) / 2,200 mm / 1,450 mm / 1,550 mm / 1,860 kg (4,100 lb) 75 HP (55 kW) / 2,200 mm / 1,450 mm / 1,550 mm / 1,900 kg (4,189 lb) Device Can be Used for the Below: - Starting & Finishing Cutting - Horizontal Cutting - The "Blind Cut" - 90 Degree Cut - Block Squaring Diamond Wire Sawing Machine *Can be Track Mounted* - Wire speed and backward speed controlled by INVERTER which grants the electronic diamond wire tensioning. All models can execute, even large cuttings, in any direction and razed to the ground. - The machine allows the execution of parallel cuts with a maximum distance of 2 meters avoiding tracks movement, thanks to the lateral translation and complete rotation of the main flywheel. Condition: New Location: Italy Learn More

Make: Marini Model: MR-C Line Series: 10 Type: Crawler Diesel Engine: Lombardini LDW 1003 Engine Power: 17 kW (23 HP) @ 3,000 RPM Main Pump: 40 lpm @ 200 bar (10.56 gal/min @ 2,900 PSI) Fuel Consumption: 2.5 l/h (0.66 gal/h) Feed Stroke: 1,760 mm / 5.77 ft Feed Force: 1,000 daN / 2,248 lbf Retract Force: 1,500 daN / 3,372 lbf Max Rotation Torque: 160 daNm / 1,180 lbft Max Rotation Speed: 60 RPM Weight: 2,866 lbs / 13,000 kg Drill Rig - MR–C 10 Mobile drilling unit suited to execute vertical, horizontal or inclined holes. Self moving wagon unit with rubber tracks, powered by a hydraulic power pack with 23 hp diesel or petrol motor (electric motor upon request). - On the MR–C 10 is installed a CID 100 mast (extraction force 1000 daN) which can be equipped with a DTH hammer rotary head torque 350 Nm ( MARINI mod. ID300 ), a coring head (MARINI mod. ID CD) or rock-drill with separated rotation ( MARINI mod. MA100 ). - Like all Marini units, the MR–C 10 can be customized in relation to the different needs. Condition: New Location: Italy Learn More

Make: Marini Model: MR-C Line Series: 50 Type: Crawler Diesel Engine: Deutz TCD 3.6 L4 Tier 4 Final Engine Power: 80 kW (107 HP) @ 2,200 RPM Main Pump: 250 lpm @ 250 bar (66.1 gal/min @ 3,626 PSI) Fuel Consumption: 6 l/h (1.58 gal/h) Feed Stroke: 2,500 mm / 8.20 ft - 3,500 mm / 11.48 ft Feed Force: 5,000 daN / 11,240 lbf Retract Force: 5,000 daN / 11,240 lbf Max Rotation Torque: 500 / 250 daNm (3,688 / 1,844 lbft) Max Rotation Speed: 40 / 80 RPM Weight: 16,535 lbs / 7,500 kg Drill Rig - The MR–C 50 is a mobile drilling unit remote controlled with separable hydraulic power pack, optimized for all the works of civil engineering, core drilling, micro piles, anchors and consolidations. - Suitable to work in narrow spaces and difficult to access, it can be equipped with the new modular mast CID 300 (extraction force 5000 daN) and it’s particularly powerful hydraulic station able to provide 107 HP, to operate any kind of hydraulic rock-drill or down-the-hole hammer and perform any type of drilling job. - Like all Marini units, the MR–C 50 can be customized in relation to the different needs. Condition: New Location: Italy Learn More

Make: Marini Model: MR-C Line Series: 90 Type: Crawler Diesel Engine: Deutz TCD 4.1 L4 Tier 4 Final Engine Power: 115 kW (154 HP) @ 2,400 RPM Main Pump: 250 lpm @ 250 bar (66.1 gal/min @ 3,626 PSI) Fuel Consumption: 6 - 7 l/h (1.6 - 1.86 gal/h) Feed Stroke: 3,500 mm / 11.48 ft Feed Force: 5,000 daN / 11,240 lbf Retract Force: 5,000 daN / 11,240 lbf Max Rotation Torque: 500 / 250 daNm (3,688 / 1,844 lbft) Max Rotation Speed: 40 / 80 RPM Weight: 33,069 lbs / 15,000 kg Drill Rig - The MR-C 90 is an hydraulic self-propelled crawler drilling unit powered by 154 HP engine for micropiling, rock anchoring and soil reinforcement by self-anchoring rods. - The machine can be equipped with all roto-percussion system, DTH hammer and coring tools. Totally radio controlled, it is the ideal solution for the most demanding drilling in all specialized civil engineering works. - Like all Marini units, the MR – C 90 can be customized in relation to the different needs. Condition: New Location: Italy Learn More

Make: Marini Model: MR-C Line Series: 15 Type: Crawler Diesel Engine: Lombardini LDW 1003 Engine Power: 17 kW (23 HP) @ 3,000 RPM Main Pump: 40 lpm @ 200 bar (10.56 gal/min @ 2,900 PSI) Fuel Consumption: 2.5 l/h (0.66 gal/h) Feed Stroke: 1800 mm / 5.90 ft Feed Force: 2,000 daN / 4,496 lbf Retract Force: 2,500 daN / 5,620 lbf Max Rotation Torque: 160 daNm / 1,180 lbft Max Rotation Speed: 60 RPM Weight: 3,307 lbs / 1,500 kg Drill Rig - MR–C 15 Mobile drilling unit suited to execute vertical, horizontal or inclined holes. - Self moving wagon unit with rubber tracks, powered by a hydraulic power pack with 23 hp diesel or petrol motor (electric motor upon request). - On the MR–C 15 is installed a CID 120 mast (extraction force 2500 daN) which can be equipped with a DTH hammer rotary head torque 350 Nm ( MARINI mod. ID300 ), a coring head (MARINI mod. ID CD) or rock-drill with separated rotation ( MARINI mod. MA100 ). - Like all Marini units, the MR–C 15 can be customized in relation to the different needs. Condition: New Location: Italy Learn More

Make: Marini Model: MR-A Line Model Series: 500 Type: Pneumatic / Hydraulic Excavator Range: Over 25 Tonnes / Da 25 Tonnes Retract Force: 13,489 lbf / 6,000 daN Clamping Range: 12.20" Inch / 310 mm Weight: 7,716 - 9,920 lb / 3,500 - 4,500 kg Drill Attachment - Certified hydraulic drilling units ready to be installed on mini, midi and big self-propelled machines with the collaboration of the best known manufactures of excavators, telescopic handlers, spiders and aerial platforms. - The drilling equipment produced by MARINI QUARRIES GROUP are optimized for all civil engineering works coring, micro-piles, anchoring and reinforcement. - All drilling systems (roto-percussion, DTH hammer and coring) can be utilized with our equipment. Condition: New Location: Italy Learn More

Make: Marini Model: MR-A Line Model Series: 300 Type: Pneumatic / Hydraulic Excavator Range: > 20 Tonnes / Over 18 Tonnes Retract Force: 13,489 lbf / 5,000 daN Clamping Range: 12.20" Inch / 310 mm Weight: 6,172 - 8,337 lb / 2,500 - 3,500 kg Drill Attachment - Certified hydraulic drilling units ready to be installed on mini, midi and big self-propelled machines with the collaboration of the best known manufactures of excavators, telescopic handlers, spiders and aerial platforms. - The drilling equipment produced by MARINI QUARRIES GROUP are optimized for all civil engineering works coring, micro-piles, anchoring and reinforcement. - All drilling systems (roto-percussion, DTH hammer and coring) can be utilized with our equipment. Condition: New Location: Italy Learn More