DRILLING

Make: Schramm Model: 660 Hours: 842 Track Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Schramm Model: T450GT Rotadrill Year: 2016 (Rebuilt) Frame Hours: Unknown Engine Hours: 0 (Brand New Rebuilt Caterpillar 3406 Engine @ 550 HP) Compressor Hours: 0 (Brand New Rebuilt Air Compressor) - Recently Rebuilt Head - $350,000 Circa at the end of 2023 and no work since - Smart Management System Installed Includes; - KL Rod Handler - 180 m Near New 4" Inch RC Harlsan Pipe - Remote Tramming - V-Pack Cooler - New Flagging Track Mounted Drill Rig Location: Western Australia Learn More

Rig Make: Schramm Model: 450 Year: 2006 Hours: 2,078 Engine: Cummins KTA19 (Fully Rebuilt June 2022) Max Pull Back: 4.5" Inch (-60 Degrees) 14 Tonne Onboard Air Compressor: Ingersoll Rand HR2 1,050 CFM / 350 PSI (Fitted New June 2022) Onboard Pump: Bean W1122 Water Pump (200 LPM @ 1,000 PSI) Gross Weight: 26.5 Tonne - 2x New Fitted Danfoss P193 Main Pumps (with Flexible Coupling Conversion - June 2022) - Twin Beacons - GME XRS Connect 2 Way Radio + Bluetooth - KL Rod Handler - Dump Mast - Ox Combination Swivel - Feaver Tools Rotating Blow-Down - 2x New Rotation Motors (Fitted June 2023) - TJM Hydraulic Breakouts - Fire Suppression - Survey Winch - Cyclone Arm fitted with Cyclone/Cone Splitter - 2x Spare Tyres (New) Rig Truck Make: Mercedes Benz Model: Actros Year: 2019 KM's: 46,788 Type: 6x6 - Fitted with All-Terrain Tyre Package Support Truck Make: Tatra Model: Phoenix Year: 2021 KM's: 33,231 Type: 8x8 - 6,000 Litre Fuel Tank with Wiggins Fast Fill - 3,500 Litre Water Tank with Stand-Pipe Fill Point and Pump Connections (2" Inch & 1" Inch Outlets x2) - Triple Spare Tyre Storage - 2x Hydraulic Tyre Carriers at front - Husky Air-Diaphragm Fuel Pump with Graco 1" Inch Hose Reel - PVC Casing Rack - Tube Storage Rack - Rod Storage for 400 metres @ 4.5" Inch - 4x Side Cupboards - 2x Front Cupboards with underneath oils storage - High View Tail Lights and Twin Beacons - Irvin Bull Bar - GME XRS Connect 2 Way Radio + Bluetooth Truck Mounted Drill Rig Location: Western Australia Learn More

Rig Make: Schramm Model: 685 Year: 1990 Hours: 251 Engine: Detroit 60 Series PTO Diesel Driven Accessories: Rod Handler, KL Rod Handler, etc. Major Repairs or Replacements; - New Fuel Pump - One New Hydraulic Pump - Rebuilt Drill Head - Numerous Repairs on going to keep the drill in a clean state Truck Make/Model: Custom Year: 1982 KM's: 6,170 Type: 8x8 Truck Mounted Drill Rig Location: Western Australia Learn More

Make: Schramm Model: 685 Year: 1996 Hours: 2,500 approx. since rebuild Engine: Cummins KT19 Includes; - Onboard Air 1350/350, 1150/500 - Comes with 330m of 4.5" Inch Metz RC Pipe - Rotating Cyclone Set Up on Metz Manipulator - Airdrill Maker Breaker - Air Spanner - KL Rod Handler Set to 4.5" inch Pipe - Dual RC Swivel and Auto Blow Down - ROPS Air Conditioned Drillers Cabin - Comes with a Carousel - Has been removed - 20m Sample Hose - 20 Spare Inner Tubes Track Mounted Drill Rig Location: Queensland, Australia Learn More

Make: Schramm Model: Typhoon Hours: 5,294 Engine: John Deere 4045DF150 Diesel Skid Mounted Booster Location: Western Australia Learn More

Cyclone & Splitter - Both units have come off a Schramm 685 Drill Rig Location: Western Australia Learn More

Splitter - Unit has come off Schramm 685 Drill Rig Location: Western Australia Learn More

Cyclone - Unit has come off Schramm 685 Drill Rig Location: Western Australia Learn More

Make: Schramm Model: T660WS Hours: 8,800 Engine: Cummins N14E - Airdrill Breakout - VGC - Sullair 1050 CFM / 350 PSI Air Compressor Truck KM's: 1,481 Type: 8x4 - X Locks - Air Conditioning Truck Mounted Drill Rig Location: Western Australia Learn More

Make: Schramm Model: T130 Drill Rig Rotation Head Location: Queensland, Australia Learn More

Make: Cortech Model: CSD1300L CSD1300L core drilling rig is specially designed for diamond core drilling. Track crawler mounted rig facilitates moving around with great convenience. Robust structure plus strong power supply ensures high penetration rate and outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 1,300m 1,000m 700m 400m Hydraulic System Pressure 26MPa Cooling Air Cooled Power System Model Cummins 6BTA5.9 –C180 Type Turbo Charged Power 132KW Engine RPM 2,500rpm Drill Head Max Torque 4,257Nm Max Rotation ,RPM 1,182rpm Feed Stroke 3.5m Max Inside Diameter 117mm Max Pull / Max Push 127KN/ 50KN Main Winch Max Pull 68KN Pulling Speed 28m/min Rope Diameter 16mm Rope Length 30m Wireline Winch Max Pull 11KN(bare drum) Pulling Speed 120m/min Rope Diameter 6.6mm Rope Length 1,000m Mast Length 10m Drilling Angle 45°-90° Dump Length 1.1m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 5,100×2,350×2,600mm Total Weight: 8.5t Diamond Coring Drill Rig Location: China Learn More

Make: Cortech Model: CSD1300G CSD1300G hydraulic rig is specially designed for diamond drilling on ground surface. Track crawler mounted rig facilitates moving around with great convenience. Multi-pressure gauge allows for monitoring working status of the rig systems. Robust structure plus strong power supply ensures high penetration rate and outstanding reliability. The up to date design of hydraulic system makes CSD1300G one of the most favoured models around the world. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 1,300m 1,000m 700m 400m Hydraulic System Pressure 26MPa Cooling Air Cooled Power System Model Cummins 6BTA5.9-C180 Type Turbo Charged Power 132KW Engine RPM 2,500rpm Drill Head Max Torque 4,257Nm Max Rotation ,RPM 1,182rpm Feed Stroke 3.5m Max Inside Diameter 117mm Max Pull/Max Push 127kN/50kN Main Winch Max Pull 68KN Pulling Speed Low:28m/min High:65m/min Rope Diameter 16mm Rope Length 30m Wireline Winch Max Pull 11KN(bare drum) Pulling Speed 120m/min(bare drum) Rope Diameter 6.6mm Rope Length 1,000m Mast Length 10m Drilling Angle 45°-90° Dump Length 1.4m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 5,430×2,300×2,600mm Total Weight 10.3t Diamond Coring Drill Rig Location: China Learn More

Make: Cortech Model: CSD3000 CSD3000 core drilling rig is specially designed for diamond core drilling. It provides precise control on the drilling capacity. The drill head is designed to slide and dump, together with the full angle rotation structure for drill mast, it effectively reduces manual inputs and improves efficiency. The hydraulic legs are stretchable, which broaden the bearing surface, and ensure outstanding reliability. Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • 9 meters rod pulling largely improves drilling efficiency due to rod collection frame design on mast • The design of side shift by hydraulic of rotation head largely reduces working tensions and guarantees personnel safety • Multi-pressure gauge reads real time pressures for kinds of major components • High/low speed control of main winch largely meets speed requirements for rods handling • Stepless control of mud pump flow facilitates various drilling needs for mud • telescopic mast greatly reduces working tensions and improves drilling efficiency. • Horizontal extension of jack legs guarantees firm rig standing on the ground. • Its full hydraulic concept includes virtually all operational functions that prevail on the latest models around the world. • Independent tramming cab set in front provides full view for easy rig walking and driver’s safety • Mast dumping guarantees perfect stability during drilling; • Independent hydraulic jacks facilities leveling of the rig; • Great convenience of control of feed pressure; • Standardized parts and components make maintenance and repairing easy; • Real time reading of drilling data on gauges on the control panel; • Mud pump and mixer powered by the rig’s hydraulic system, controlled directly on the rig’s panel; • Top grade hydraulics of European origin; • Experienced engineers plus adequate spare parts ready to provide full service. Specifications: Drilling Capacity Dia of Drill Rod BS,NS,HS,PS Drilling Depth 3,000m 2,300m 1,600m 1,050m Hydraulic System Pressure 28MPa Cooling Air Cooled Power System Model Cummins 6LTAA8.9-C325 Type Turbo Charged Power 239KW Engine RPM 2,200rpm Drill Head Max Torque 8,170Nm Max Rotation ,RPM 1,250rpm Feed Stroke 3,450mm Max Inside Diameter 117mm Max Pull /Max Push 250KN/110KN Main Winch Max Pull 181.44KN Pulling Speed Low:33m/min High:70m/min Rope Diameter 24mm Rope Length 41m Wireline Winch Max Pull 18KN(bare drum) Pulling Speed 150m/min(bare drum) Rope Diameter 6.6mm Rope Length 2,500m Mast Length 11.2-13.7m Drilling Angle 45°-90° Dump Length 1.4m Foot Clamp Drill Rod BS, NS, HS, PS Travelling Capacity Max.Permissible Gradient 30° Max.Travelling Speed 2km/h Transporting Dimensions L×W×H 11,240×2,310×3,330mm Total Weight 23.5t Diamond Coring Drill Rig Location: China Learn More