DRILLING
DRILLING
Browse a wide range of quality drilling equipment for sale or hire.
If you are looking to buy or hire drilling equipment use our browse or search criteria to review listings from private sellers or suppliers. We have a huge selection of drilling products from across Australia and the world.
Cannot find what you are looking for? Contact a consultant and we will seek out what you need. Want to sell or hire your own equipment, advertise for free with a FREE LISTING.
-
1999 Ingersoll Rand IR TH75E Drill Rig Mounted on 1999 International Acco 8x4 C/Cab Truck ($225,000 ex GST) (sale-ehub3343)For Sale$225,000.00Rig Make: Ingersoll Rand Model: TH75E Year: 1999 Hours: 750 (from new) Engine: Cummins 8.3 ltr Engine - Hydraulic Folding Console - New Rod Rack (Holds 210 metres of 3-5" Inch Rods) - Has been sand blasted and painted - Excellent condition & can see working any time Truck Make: International Model: Acco Year: 1999 KM's: 571,286 Type: 8x4 C/Cab - Truck has just been through road worthy Condition: Good Truck Mounted Drill Rig Location: Queensland, Australia Learn MoreMachine hours 750 (from new)
KILOMETERS 571,286
YEAR 1999
BRAND Ingersoll Rand
LOCATION Queensland, Australia
MODEL TH75E
-
2017 Ingersoll Rand 1,200 CFM / 300 PSI Air Compressor ($20,000 ex GST) (sale-ehub3680)For Sale$20,000.00Make: Ingersoll Rand Model: 1,200 CFM / 300 PSI Year: 2017 Air Compressor Location: Western Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2017
BRAND Ingersoll Rand
LOCATION Western Australia
MODEL 1,200 CFM / 300 PSI
-
*SOLD* 2012 Ingersoll Rand XHP 1,250 CFM / 350 PSI Hydraulic Jack Up Rod Sloop Air Compressor ($135,000 ex GST) (sale-ehub3655) *SOLD*For Sale$135,000.00Make: Ingersoll Rand Model: XHP Year: 2012 Hours: 1,200 approx. Engine: Detroit 60 Series 1,250 CFM 350 PSI Hydraulic Jack Up Rod Sloop Air Compressor Location: Queensland, Australia Learn MoreMachine hours 1,200
KILOMETERS N/A YEAR 2012
BRAND Ingersoll Rand
LOCATION Queensland, Australia
MODEL XHP
-
Ingersoll Rand LM500C Mast Feed Reduction Assembly ($1,500 ex GST) (sale-ehub3651)For Sale$1,500.00Make: Ingersoll Rand Model: LM500C P/N: 402S1000-00 Condition: New Mast Feed Reduction Assembly Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Ingersoll Rand
LOCATION Queensland, Australia
MODEL LM500C
-
Ingersoll Rand LM500C Mast Feed Hydraulic Motor Including Reduction Assembly ($2,250 ex GST) (sale-ehub3650)For Sale$2,250.00Make: Ingersoll Rand Model: LM500C P/N: CS04-RB-35-25-1 Condition: New Mast Feed Hydraulic Motor Including Reduction Assembly Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Ingersoll Rand
LOCATION Queensland, Australia
MODEL LM500C
-
2x Ingersoll Rand LM500C Final Drive Alternative Manufacture ($8,850 ex GST) (sale-ehub3649)For Sale$8,850.00Make: Ingersoll Rand Model: LM500C Varients: Everdigm T500 / Soosan & Junjin Drill Rigs Quantity: 2 Final Drive Alternative Manufacture Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Ingersoll Rand
LOCATION Queensland, Australia
MODEL LM500C
-
1985 Ingersoll Rand T4W Drill Rig Mounted on CCC Single Steer Carrier ($175,000 ex GST) (sale-ehub3617)For Sale$175,000.00Rig Make: Ingersoll Rand Model: T4W Year: 1985 - Upgraded Hours: 3,000 Engine: Cummins N14 Maximum Power (kW): 700 HP Maximum Torque (Nm): 10,846 Nm Useable Fuel Capacity (L): 400 L Approx Maximum Feed Force (KN): 30,000 ln/LB Maximum Stroke (M): 8 m Maximum Rod Pull: 70,000 IN/LB 7 Rod Carousel: Plus 4 Rod Lazy Susan Drill Rod Capacity: 4 1/2API, 7 Rod Main Carousel, 4 in Lazy Susan Length 7.6 Metres - Air Compressor: IR HR2 - 900/350 Exchange - 2,000 hours ago - Recirculating Pump Flow (L/Min): CAT 2520 1,000 PSI Injection Pump - Aux Hydraulic Ports for Mixing - Aux Regulated Air Ports for Tooling: 100 PSI Regulator Rig Carrier: - CCC Single Steer Engine: CAT 3408 Motor - Range Rover Gear Box Dimensions (L x W x H): 10.7 m x 2.4 m x 4.2 m (Mast Down) / 11 m (Mast Up) Carrier Mounted Drill Rig Location: Northern Territory, Australia Learn MoreMachine hours 3,000
KILOMETERS N/A YEAR 1985
BRAND Ingersoll Rand
LOCATION Northern Territory, Australia
MODEL T4W
-
1998 Ingersoll Rand DME 50E Track Mounted Crawler Blast Hole Drill Rig ($USD107,000) (sale-ehub3380)For Sale$0.00Make: Ingersoll Rand Model: DME 50E Year: 1998 Hours: 8,427 - Good Undercarriage - Ready to Work Track Mounted Crawler Blast Hole Drill Rig Location: United States of America Learn MoreMachine hours 8,427
KILOMETERS N/A YEAR 1998
BRAND Ingersoll Rand
LOCATION United States of America
MODEL DME 50E
-
2020 Ingersoll Rand DM30 Drill Rig Mounted on 2012 International Navistar 7600 Truck (Open to Offers) (sale-ehub3350)For Sale$0.00Rig Make: Ingersoll Rand Model: DM30 Year: 2020 (Refurbished) Hours: 7,923 Engine: Cummins KAT19 @ 550 HP Onboard Compressor: Simma Sullair 1,050 CFM / 350 PSI - Fully equipped & operational Truck Make: International Model: Navistar 7600 Year: 2012 Miles: 72,000 Included; - FMC Water Pump - 2x Heavy Duty Operational Winch Not Included; - 120 Metres of 4 1/2 Faber Drilling Rods Truck Mounted Drill Rig Location: Chile Learn MoreMachine hours 7,923
KILOMETERS 72,000 (Miles)
YEAR 2020
BRAND Ingersoll Rand
LOCATION Chile
MODEL DM30
-
Ingersoll Rand CD500 (T3W) Customised Drill Rig Mounted on 1984 MAN 32.280 8x8 Prime Mover Truck ($55,000 ex GST) (sale-ehub3108)For Sale$55,000.00Rig Make: Ingersoll Rand Model: CD500 (T3W) Customised Year: Unknown Hours: 31,650 Engine: Detroit 60 Series Diesel - Ingersoll Rand 900/350 Compressor was running but has not been started for many years, ceased - L09 Triplex Bean Pump - Fitted with 4 Hydraulic Jacks - Fitted Dump Mast - Fire Suppression - Fire Extinguishers - Emergency Stops - Exhaust Lagging - 6 Rig Service Air - Mud Line - Safety Restraints - Hydraulic Rod Jib - Foremost Rod Handler *No Rod Presenter Support Frame* - Hand Rails and Stairs Truck Make: MAN Model: 32.280 Year: 1984 KM's: 33,665 Type: 8x8 Truck Mounted Drill Rig Prime Mover Location: Western Australia Learn MoreMachine hours 31,650
KILOMETERS 33,665
YEAR 1984
BRAND Ingersoll Rand
LOCATION Western Australia
MODEL CD500 (T3W) Customised
-
2 x Ingersoll Rand Drill & Blast Drill Rig Masts ($23,000 ex GST each) (sale-ehub3039)For Sale$23,000.00Make: Ingersoll Rand Quantity: 2 Drill & Blast Drill Rig Masts Location: New South Wales, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Ingersoll Rand
LOCATION New South Wales, Australia
MODEL N/A
-
Ingersoll Rand DML HP1250 Track Mounted Drill Rig ($440,000 ex GST) (sale-ehub3038)For Sale$440,000.00Make: Ingersoll Rand Model: DML HP1250 Hours: 3,117 Track Mounted Drill Rig Location: New South Wales, Australia Learn MoreMachine hours 3,117
KILOMETERS N/A YEAR N/A BRAND Ingersoll Rand
LOCATION New South Wales, Australia
MODEL DML HP1250
-
2012 Ingersoll Rand MH350-2S IR Air Compressor + Control Cabinet, Jemako HXK500 Dryer & Filters on Stands ($45,000 ex GST) (sale-ehub2050)For Sale$45,000.00Make: Ingersoll Rand Model: MH350-2S Year: 2012 Hours: 1,443 / 669 Loaded Run IR 350 kW 2,100 CFM 10 Bar - Control Cabinet - Jemako HXK500 Dryer - 150 mm Pre & After Filters on Stands Skid Mounted Air Compressor Location: South Australia Learn MoreMachine hours 1,443 / 669 Loaded Run
KILOMETERS N/A YEAR 2012
BRAND Ingersoll Rand
LOCATION South Australia
MODEL MH350-2S
-
Funk Box Suited to Ingersoll Rand T5 Drill Rig ($9,000 ex GST) (sale-ehub1819)For Sale$9,000.00Funk Box Year: 2004 Suited to; Make: Ingersoll Rand Model: T5 Drill Rig Funk Box Location: Queensland, Australia Learn MoreMachine hours N/A KILOMETERS N/A YEAR 2004
BRAND Ingersoll Rand
LOCATION Queensland, Australia
MODEL T5
-
2000 Ingersoll Rand TW3 Water Well Drill Rig Mounted on 1988 Volvo FL10 8x4 Truck ($460,000 ex GST) (sale-ehub1564)For Sale$460,000.00Rig Make: Ingersoll Rand Model: TW3 Year: 2000 Hours: Approx 7,500 Truck Make: Volvo Model: FL10 KM's: 109,514 Type: 8x4 GVM: 32,000 kg Seats: 2 Location: Western Australia Learn MoreMachine hours Approx 7,500
KILOMETERS 109,541
YEAR 2000
BRAND Ingersoll Rand
LOCATION Western Australia
MODEL Rig: TW3 / Truck: FL10
-
Marini MR-S Line Drilling Power Packs *New* (POA) (sale-ehub1453)For Sale$0.00Power Pack w/ Diesel Engine Mod. 56 D Engine: Lombardini KDI 1903 TCR Engine Power: 41 kW @ 2,600 RPM / 56 HP @ 2,600 RPM Main Pump: 120 lpm @ 200 bar / 31.70 gal/min @ 2,900 PSI Oil Tank: 150 Litres / 39.6 Gal Fuel Tank: 70 Litres / 18.48 Gal Cooling: Separate Oil Air Exchanger Power Pack w/ Gasoline Engine Mod. 23 B Engine: Brigg & Stratton Engine Power: 17 kW @ 3,000 RPM / 23 HP @ 3,000 RPM Main Pump: 40 lpm @ 160 bar / 10.56 gal/min @ 2,320 PSI Oil Tank: 50 Litres / 13.2 Gal Fuel Tank: 20 Litres / 5.28 Gal Cooling: Separate Oil Air Exchanger Weight: 150 kg / 330 lbs Condition: New Location: Italy Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Marini
LOCATION Italy
MODEL MR-S Line
-
Marini MR-S Line MCDP 80x80 Drilling Slides *New* (POA) (sale-ehub1452)For Sale$0.00Make: Marini Model: MR-S Line MCDP 80x80 Weight: 374 lbs / 170 kg Feed Stroke: 2,160 mm / 7.09 ft Feed Force: 1,250 daN / 2,810 lbf Retract Force: 1,250 daN / 2,810 lbf Rotary Head Max Rotation Torque: 160 daNm / 1,180 lbft Max Rotation Speed: 30 RPM Rock Drill Max Rotation Torque: 30 daNm / 221 lbft Max Rotation Speed: 60 RPM Drilling Slides The MR–S MCDP 80×80 drilling slide is powered with a pneumatic piston feeding motor, can be equipped with 4” DTH hammer (with Marini EP95 and EP 30 / 160 rotation head), with 58 Kg rock-drill with separate right and left rotation (Marini MA 100 rock-drill) or with a rotopercussion pneumatic rock-drill (Marini MA90 rock-drill). Condition: New Location: Italy Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Marini
LOCATION Italy
MODEL MR-S Line MCDP 80x80
-
Marini MR-S Line 100 Series Drilling Slides *New* (POA) (sale-ehub1451)For Sale$0.00Make: Marini Model: MR-S Line Series: 100 Weight: 771 lbs / 350 kg Feed Stroke: 2,160 mm / 7.09 ft Feed Force: 1,000 daN / 2,248 lbf Retract Force: 1,500 daN / 3,372 lbf Rotary Head Max Rotation Torque: 350 daNm / 2,581 lbft Max Rotation Speed: 40 RPM Rock Drill Max Rotation Torque: 100 daNm / 737 lbft Max Rotation Speed: 100 RPM Clamp Range Mod 25/115: 25 / 115 mm (0.98 / 4.5 in) Mod 70/188: 25 / 188 mm (0.98 / 7.40 in) Drilling Slides The MR–S 100 drilling slides are powered by an hydraulic feeding cylinder, can be equipped with 4” DTH hammer (with Marini ID 160 and ID 300 rotation head), with 58 kg hydraulic rock-drill with separate right and left rotation (Marini MA 100 rock-drill) or with a rotopercussion pneumatic rock-drill (Marini MA90 rock-drill). Condition: New Location: Italy Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Marini
LOCATION Italy
MODEL MR-S Line
-
Marini MR-T Line 20 / 25 / 60 / 75 HP Mobil Fil & Mini Mobil Fil Diamond Wire Sawing Machine *New* (POA) (sale-ehub1449)For Sale$0.00Make: Marini Model: MR-T Line Type: Mobil Fil & Mini Mobil Fil Main Motor / Length / Width / Height / Weight: 20 HP (15 kW) / 1,300 mm / 900 mm / 1,000 mm / 920 kg (2,028 lb) 25 HP (18 kW) / 1,300 mm / 900 mm / 1,000 mm / 950 kg (2,094 lb) 60 HP (45 kW) / 2,200 mm / 1,450 mm / 1,550 mm / 1,860 kg (4,100 lb) 75 HP (55 kW) / 2,200 mm / 1,450 mm / 1,550 mm / 1,900 kg (4,189 lb) Device Can be Used for the Below: - Starting & Finishing Cutting - Horizontal Cutting - The "Blind Cut" - 90 Degree Cut - Block Squaring Diamond Wire Sawing Machine *Can be Track Mounted* - Wire speed and backward speed controlled by INVERTER which grants the electronic diamond wire tensioning. All models can execute, even large cuttings, in any direction and razed to the ground. - The machine allows the execution of parallel cuts with a maximum distance of 2 meters avoiding tracks movement, thanks to the lateral translation and complete rotation of the main flywheel. Condition: New Location: Italy Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Marini
LOCATION Italy
MODEL MR-T Line
-
Marini MR-C Line 10 Series Track Mounted Crawler Drill Rig *New* (POA) (sale-ehub1448)For Sale$0.00Make: Marini Model: MR-C Line Series: 10 Type: Crawler Diesel Engine: Lombardini LDW 1003 Engine Power: 17 kW (23 HP) @ 3,000 RPM Main Pump: 40 lpm @ 200 bar (10.56 gal/min @ 2,900 PSI) Fuel Consumption: 2.5 l/h (0.66 gal/h) Feed Stroke: 1,760 mm / 5.77 ft Feed Force: 1,000 daN / 2,248 lbf Retract Force: 1,500 daN / 3,372 lbf Max Rotation Torque: 160 daNm / 1,180 lbft Max Rotation Speed: 60 RPM Weight: 2,866 lbs / 13,000 kg Drill Rig - MR–C 10 Mobile drilling unit suited to execute vertical, horizontal or inclined holes. Self moving wagon unit with rubber tracks, powered by a hydraulic power pack with 23 hp diesel or petrol motor (electric motor upon request). - On the MR–C 10 is installed a CID 100 mast (extraction force 1000 daN) which can be equipped with a DTH hammer rotary head torque 350 Nm ( MARINI mod. ID300 ), a coring head (MARINI mod. ID CD) or rock-drill with separated rotation ( MARINI mod. MA100 ). - Like all Marini units, the MR–C 10 can be customized in relation to the different needs. Condition: New Location: Italy Learn MoreMachine hours N/A KILOMETERS N/A YEAR N/A BRAND Marini
LOCATION Italy
MODEL MR-C Line
DRILLING
- Boosters
- Compressors
- Containers
- Drill Bits, Hammers, Subs
- Drilling Consumables
- Drill Pipe
- DRILL RIGS – DRILL & BLAST
- Drill Rigs - Horizontal
- Drill Rigs - Vertical
- Forklifts & Telehandlers
- Generators
- Grouting Equipment
- Jack Up Rod Sloops / Bases
- Light Towers
- Logging Equipment
- Mud Pumps & Parts
- Mud Systems
- Off Shore rigs
- Oil Field Equipment
- Other
- Parts & Accessories
- Portable Buildings
- Tanks
- Trucks
- Vehicles
- Lighting
Filter
Now Shopping by
Shopping Options
- Brand Ingersoll Rand Remove This Item
- Brand Marini Remove This Item
